3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownLM293QT
STMicroelectronics · Comparators · DFN-8(2x2)
LM293QT from STMicroelectronics, in a DFN-8(2x2). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | Out1 | output | Output of first comparator; accepts sink current up to 20 mA with low output saturation voltage 80 mV typical at Isink = 4 mA, TTL/MOS/CMOS compatible. |
| 2 | In1- | input | Inverting input of first comparator; input bias current 20 nA typical, common-mode voltage range 0 to (VCC+) - 1.5 V. |
| 3 | In1+ | input | Non-inverting input of first comparator; input bias current 20 nA typical, common-mode voltage range 0 to (VCC+) - 1.5 V. |
| 4 | Vcc- | power_in | Negative power supply; voltage range -0.3 V to Vcc+ + 0.3 V; combined with Vcc+ provides 2 to 36 V supply voltage. |
| 5 | In2+ | input | Non-inverting input of second comparator; input bias current 20 nA typical, common-mode voltage range 0 to (VCC+) - 1.5 V. |
| 6 | In2- | input | Inverting input of second comparator; input bias current 20 nA typical, common-mode voltage range 0 to (VCC+) - 1.5 V. |
| 7 | Out2 | output | Output of second comparator; accepts sink current up to 20 mA with low output saturation voltage 80 mV typical at Isink = 4 mA, TTL/MOS/CMOS compatible. |
| 8 | Vcc+ | power_in | Positive power supply; voltage range ±18 V or 36 V single supply; combined with Vcc- provides 2 to 36 V supply voltage. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | STMicroelectronics |
| Package | DFN-8(2x2) |
| Category | Amplifiers/Comparators |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage (absolute maximum, ±18 or 36 V as printed) | VCC | -18 | 36 | V | Printed as ±18 or 36 V | 4 | |
| Differential input voltage (LM193, LM293, LM393) | Vid | -36 | 36 | V | LM193, LM293, LM393 (not LM393W) | 4 | |
| Input voltage (LM193, LM293, LM393) | Vin | -0.3 | 36 | V | LM193, LM293, LM393 (not LM393W, which is Vcc- -0.3 to Vcc+ +0.3) | 4 | |
| Maximum junction temperature | Tj | 150 | °C | 4 | |||
| Storage temperature range | Tstg | -65 | 150 | °C | 4 | ||
| Operating free-air temperature range (LM293) | Toper | -40 | 105 | °C | LM293, LM293A | 5 | |
| Supply voltage (operating) | VCC | 2 | 36 | V | (VCC+) - (VCC-) | 5 | |
| Common mode input voltage range, lower limit | Vicm | 0 | V | VCC+ = 30 V, Tamb = 25 °C; upper limit printed as (VCC+) - 1.5 | 5 | ||
| Common mode input voltage range, lower limit (Tmin to Tmax) | Vicm | 0 | V | VCC+ = 30 V, Tmin ≤ Tamb ≤ Tmax; upper limit printed as (VCC+) - 2 | 5 | ||
| Input offset voltage | Vio | 1 | 5 | mV | VCC+ = 5 V, VCC- = 0 V, Tamb = 25 °C | 6 | |
| Input offset voltage | Vio | 9 | mV | Tmin ≤ Tamb ≤ Tmax | 6 | ||
| Input offset current | Iio | 3 | 50 | nA | VCC+ = 5 V, VCC- = 0 V, Tamb = 25 °C | 6 | |
| Input offset current | Iio | 150 | nA | Tmin ≤ Tamb ≤ Tmax | 6 | ||
| Input bias current (I+ or I-) | Iib | 20 | 250 | nA | VCC+ = 5 V, VCC- = 0 V, Tamb = 25 °C | 6 | |
| Input bias current (I+ or I-) | Iib | 400 | nA | Tmin ≤ Tamb ≤ Tmax | 6 | ||
| Large signal voltage gain | Avd | 50 | 200 | V/mV | VCC = 15 V, RL = 15 kΩ, Vo = 1 V to 11 V | 6 | |
| Supply current (all comparators) | ICC | 0.45 | 1 | mA | VCC = 5 V, no load | 6 | |
| Supply current (all comparators) | ICC | 0.6 | 2.5 | mA | VCC = 30 V, no load | 6 | |
| Low-level output voltage | VOL | 80 | 400 | mV | Vid = -1 V, Isink = 4 mA | 6 | |
| Low-level output voltage | VOL | 700 | mV | Tmin ≤ Tamb ≤ Tmax; Vid = -1 V, Isink = 4 mA | 6 | ||
| Output sink current | Isink | 6 | 18 | mA | Vid = 1 V, Vo = 1.5 V | 6 | |
| High-level output current | IOH | 0.1 | nA | VCC = Vo = 30 V, Vid = 1 V | 6 | ||
| High-level output current | IOH | 1 | μA | Tmin ≤ Tamb ≤ Tmax; VCC = Vo = 30 V, Vid = 1 V | 6 | ||
| Response time | tre | 1.3 | μs | RL = 5.1 kΩ connected to VCC+ | 6 | ||
| Large signal response time | trel | 300 | ns | RL = 5.1 kΩ connected to VCC+, TTL, V(ref) = 1.4 V | 6 | ||
| Thermal resistance junction to ambient (DFN8 2x2) | Rthja | 57 | °C/W | DFN8 2x2; footnote 2: values are typical | 4 |
CAD (KiCad official)
- Symbol:
LM293QT - Footprint:
Package_DFN_QFN:DFN-8_2x2mm_P0.5mm - 3D model: DFN-8(2x2) (KiCad packages3D, STEP)
- 3D model files:
lm293qt-etched.step/lm293qt-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);lm293qt.step/lm293qt.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: STMicroelectronics datasheet (18 pp, sha256
31d06d834156345d, retrieved 2026-10-03, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-4-5-20251001(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).