component

LM293NS08ARBE

Public Made by Adom

by adom

GR Comparators, SOP-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.

componentamplifiers-comparatorslm293ns08arbefactory-2.0.0extractor-text
Overview Files Discover Packages Releases Dependencies Issues Breadcrumbs Pull Requests Activity

3D Model

Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

Datasheet

Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

LM293NS08ARBE

GR · Comparators · SOP-8

LM293NS08ARBE from GR, in a SOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 OUT1 output Output pin of comparator 1, an open-drain output that needs an external pull-up to set its logic-high level (VOH) and can be wired-AND with other open-collector outputs.
2 IN1- input Negative (inverting) input pin of comparator 1; input common-mode range is 0 V to VCC-2 V at temperatures below 25 °C, and the voltage at either input should not go below -0.3 V.
3 IN1+ input Positive (non-inverting) input pin of comparator 1; input common-mode range is 0 V to VCC-2 V at temperatures below 25 °C, and the voltage at either input should not go below -0.3 V.
4 GND power_in Ground reference pin for the device (voltage values are referenced to network ground).
5 IN2+ input Positive (non-inverting) input pin of comparator 2; input common-mode range is 0 V to VCC-2 V at temperatures below 25 °C, and the voltage at either input should not go below -0.3 V.
6 IN2- input Negative (inverting) input pin of comparator 2; input common-mode range is 0 V to VCC-2 V at temperatures below 25 °C, and the voltage at either input should not go below -0.3 V.
7 OUT2 output Output pin of comparator 2, an open-drain output that needs an external pull-up to set its logic-high level (VOH) and can be wired-AND with other open-collector outputs.
8 VCC power_in Power supply pin; single-supply operation is specified from 2 V to 32 V (absolute maximum 36 V), with dual supplies of ±16 V also supported.

Key specifications

Parameter Value
Manufacturer GR
Package SOP-8
Category Amplifiers/Comparators
Pins 8

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Single Supply Voltage VCC 36 V 2
Dual Supply Voltage VS -18 18 V 2
Differential Input Voltage VIDR -18 18 V Differential voltages are at IN+ with respect to IN- 2
Common-Mode Input Voltage VICR -0.3 V 2
Output Voltage VO 36 V 2
Output Current IO 30 mA 2
Junction Temperature TJ 125 ℃ 2
Operating Temperature TOP -25 85 ℃ 2
Supply Current ICC 0.9 2 mA VCC=5V,no load 2
Supply Current ICC 1.25 3 mA VCC=30V,no load 2
Input Bias Current IB 100 500 nA VO=1.4V 2
Input Offset Voltage VOS 1 5 mV VCC=5-30V; VO=1.4V,VCM=VCMR(min) 2
Input Offset Current IOS 5 50 nA VO=1.4V 2
Common-Mode Voltage Range VCMR 0 V Ta=25℃ 2
Low-Level Output Voltage VOL 100 400 mV IOL=4mA,VDM=-1V 3
High-level Output Current IOH 1 uA VOH=5V,VDM=1V 3
Single Supply Voltage VCC 2 32 V 3
Dual Supply Voltage VS -16 16 V 3

CAD (KiCad official)

  • Symbol: LM293NS08ARBE
  • Footprint: Package_SO:SOIC-8_3.9x4.9mm_P1.27mm
  • 3D model: SOP-8 (KiCad packages3D, STEP)
  • 3D model files: lm293ns08arbe-etched.step / lm293ns08arbe-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); lm293ns08arbe.step / lm293ns08arbe.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: GR datasheet (7 pp, sha256 82bef3de94b24b4c, retrieved 2026-10-18, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF