main
Ray
Publish 0.1.0
b9334ba
LM293M
HGSEMI · Comparators · SOP-8
LM293M from HGSEMI, in a SOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | 1OUT | output | Comparator 1 open-drain output, with typical low-level output voltage of 0.1V at IOL=4mA. |
| 2 | 1IN- | input | Comparator 1 inverting input, with common-mode range of 0V to VCC-1.5V. |
| 3 | 1IN+ | input | Comparator 1 non-inverting input, with common-mode range of 0V to VCC-1.5V. |
| 4 | VEE | power_in | Negative supply, tied to GND (0V) in single-supply operation or down to -16V in dual-supply operation. |
| 5 | 2IN+ | input | Comparator 2 non-inverting input, with common-mode range of 0V to VCC-1.5V. |
| 6 | 2IN- | input | Comparator 2 inverting input, with common-mode range of 0V to VCC-1.5V. |
| 7 | 2OUT | output | Comparator 2 open-drain output, with typical low-level output voltage of 0.1V at IOL=4mA. |
| 8 | VCC | power_in | Positive supply, 2V to 32V single supply or up to +16V dual supply, with absolute maximum of 36V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | HGSEMI |
| Package | SOP-8 |
| Category | Amplifiers/Comparators |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Operating temperature (LM293) | TA | -40 | 85 | ℃ | 3 | ||
| Storage temperature | TS | -65 | 150 | ℃ | 3 | ||
| Single supply voltage | VCC | 36 | V | 3 | |||
| Dual supply voltage | VS | -18 | 18 | V | 3 | ||
| Differential input voltage | VIDR | -18 | 18 | V | Voltage between IN+ and IN- | 3 | |
| Common mode input voltage | VICR | -0.3 | V | Printed as -0.3~VCC; upper limit is VCC | 3 | ||
| Power dissipation | PD | 500 | mW | 3 | |||
| Soldering temperature | TW | 260 | ℃ | 10s | 3 | ||
| Single supply operating voltage | VCC | 2 | 32 | V | VEE=0V(GND) | 4 | |
| Dual supply operating voltage | VS | -16 | 16 | V | VCC+,VEE- | 4 | |
| Input offset voltage | VIO | 2 | 5 | mV | VCC=5V to 30V, VIC=VICR(Min),VO=1.4V,TA=25℃ | 4 | |
| Input offset voltage (TA=MIN~MAX) | VIO | 9 | mV | VCC=5V to 30V, VIC=VICR(Min),VO=1.4V,TA=MIN~MAX | 4 | ||
| Input offset current | IIO | 5 | 50 | nA | VO=1.4V, TA=25℃ | 4 | |
| Input offset current (TA=MIN~MAX) | IIO | 250 | nA | VO=1.4V, TA=MIN~MAX | 4 | ||
| Input bias current | IBIAS | 100 | 500 | nA | VO=1.4V | 4 | |
| Input common mode voltage range | VICR | 0 | V | VCC=5V to 30V; printed max is VCC-1.5V | 4 | ||
| Input differential voltage range | VID | 0 | V | VCC=5V to 30V; printed max is VCC-1.5V | 4 | ||
| Output low voltage | VOL | 0.1 | 0.4 | V | VID=-1V, IOL=4mA | 4 | |
| Output leakage current | IOH | 1 | uA | VID=1V,VO=VCC=30V | 4 | ||
| Supply current (VCC=5V) | ICC | 0.6 | 2 | mA | VCC=5V,No load | 4 | |
| Supply current (VCC=32V) | ICC | 1 | 3 | mA | VCC=32V, No load | 4 |
CAD (KiCad official)
- Symbol:
LM293M - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOP-8 (KiCad packages3D, STEP)
- 3D model files:
lm293m-etched.step/lm293m-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);lm293m.step/lm293m.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: HGSEMI datasheet (11 pp, sha256
8d7cc51ca8b6bc2a, retrieved 2026-11-05, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# LM293M
**HGSEMI** · Comparators · SOP-8
LM293M from HGSEMI, in a SOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | 1OUT | output | Comparator 1 open-drain output, with typical low-level output voltage of 0.1V at IOL=4mA. |
| 2 | 1IN- | input | Comparator 1 inverting input, with common-mode range of 0V to VCC-1.5V. |
| 3 | 1IN+ | input | Comparator 1 non-inverting input, with common-mode range of 0V to VCC-1.5V. |
| 4 | VEE | power_in | Negative supply, tied to GND (0V) in single-supply operation or down to -16V in dual-supply operation. |
| 5 | 2IN+ | input | Comparator 2 non-inverting input, with common-mode range of 0V to VCC-1.5V. |
| 6 | 2IN- | input | Comparator 2 inverting input, with common-mode range of 0V to VCC-1.5V. |
| 7 | 2OUT | output | Comparator 2 open-drain output, with typical low-level output voltage of 0.1V at IOL=4mA. |
| 8 | VCC | power_in | Positive supply, 2V to 32V single supply or up to +16V dual supply, with absolute maximum of 36V. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | HGSEMI |
| Package | SOP-8 |
| Category | Amplifiers/Comparators |
| Pins | 8 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Operating temperature (LM293) | TA | -40 | | 85 | ℃ | | 3 |
| Storage temperature | TS | -65 | | 150 | ℃ | | 3 |
| Single supply voltage | VCC | | | 36 | V | | 3 |
| Dual supply voltage | VS | -18 | | 18 | V | | 3 |
| Differential input voltage | VIDR | -18 | | 18 | V | Voltage between IN+ and IN- | 3 |
| Common mode input voltage | VICR | -0.3 | | | V | Printed as -0.3~VCC; upper limit is VCC | 3 |
| Power dissipation | PD | | | 500 | mW | | 3 |
| Soldering temperature | TW | | | 260 | ℃ | 10s | 3 |
| Single supply operating voltage | VCC | 2 | | 32 | V | VEE=0V(GND) | 4 |
| Dual supply operating voltage | VS | -16 | | 16 | V | VCC+,VEE- | 4 |
| Input offset voltage | VIO | | 2 | 5 | mV | VCC=5V to 30V, VIC=VICR(Min),VO=1.4V,TA=25℃ | 4 |
| Input offset voltage (TA=MIN~MAX) | VIO | | | 9 | mV | VCC=5V to 30V, VIC=VICR(Min),VO=1.4V,TA=MIN~MAX | 4 |
| Input offset current | IIO | | 5 | 50 | nA | VO=1.4V, TA=25℃ | 4 |
| Input offset current (TA=MIN~MAX) | IIO | | | 250 | nA | VO=1.4V, TA=MIN~MAX | 4 |
| Input bias current | IBIAS | | 100 | 500 | nA | VO=1.4V | 4 |
| Input common mode voltage range | VICR | 0 | | | V | VCC=5V to 30V; printed max is VCC-1.5V | 4 |
| Input differential voltage range | VID | 0 | | | V | VCC=5V to 30V; printed max is VCC-1.5V | 4 |
| Output low voltage | VOL | | 0.1 | 0.4 | V | VID=-1V, IOL=4mA | 4 |
| Output leakage current | IOH | | | 1 | uA | VID=1V,VO=VCC=30V | 4 |
| Supply current (VCC=5V) | ICC | | 0.6 | 2 | mA | VCC=5V,No load | 4 |
| Supply current (VCC=32V) | ICC | | 1 | 3 | mA | VCC=32V, No load | 4 |
## CAD (KiCad official)
- Symbol: `LM293M`
- Footprint: `Package_SO:SOIC-8_3.9x4.9mm_P1.27mm`
- 3D model: SOP-8 (KiCad packages3D, STEP)
- 3D model files: `lm293m-etched.step` / `lm293m-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `lm293m.step` / `lm293m.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [HGSEMI datasheet](docs/lm293m-datasheet.pdf) (11 pp, sha256 `8d7cc51ca8b6bc2a`, retrieved 2026-11-05, tier: lcsc)
- **Datasheet language:** Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/lm293m-datasheet.pdf)