main
Ray
lm293dt: laser-etched CAD + chip hero (factory 2.0.0 backfill)
b99b3a3
LM293DT
STMicroelectronics · Comparators · SO-8
LM293DT from STMicroelectronics, in a SO-8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | Out1 | output | Comparator 1 open-collector output. Requires an external pull-up to VCC+ (typ. 5.1 kΩ). Can sink up to ~16 mA (Vid=1 V, Vo=1.5 V). |
| 2 | In1- | input | Comparator 1 inverting input. Common-mode input range includes ground; input voltage must not go more negative than 0.3 V below VCC-. |
| 3 | In1+ | input | Comparator 1 non-inverting input. Common-mode input range includes ground; up to (VCC+)-1.5 V at 25 °C. |
| 4 | Vcc- | power_in | Negative supply / ground pin. Tie to GND for single-supply operation (2 V to 36 V), or to a negative rail (down to -18 V) for split-supply operation. |
| 5 | In2+ | input | Comparator 2 non-inverting input. Common-mode input range includes ground; up to (VCC+)-1.5 V at 25 °C. |
| 6 | In2- | input | Comparator 2 inverting input. Common-mode input range includes ground; input voltage must not go more negative than 0.3 V below VCC-. |
| 7 | Out2 | output | Comparator 2 open-collector output. Requires an external pull-up to VCC+ (typ. 5.1 kΩ). Sinks up to ~16 mA at Vo=1.5 V. |
| 8 | Vcc+ | power_in | Positive supply pin. Single-supply range 2 V to 36 V (referenced to VCC-), or up to +18 V in a split-supply configuration. Typ. supply current 0.45 mA at 5 V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | STMicroelectronics |
| Package | SO-8 |
| Category | Op-amp/Cmp |
| Pins | 8 |
Ordering variants
Same part, different packaging or reel option.
LM293DTLM293DTPTLM293DTDLM293DTDRLM293DTSTLM293DTCT
CAD (KiCad official)
- Symbol:
LM293DT - Footprint:
Package_SO:TI_SO-PowerPAD-8 - 3D model: SO-8 (KiCad packages3D, STEP)
- 3D model files:
lm293dt-etched.step/lm293dt-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);lm293dt.step/lm293dt.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: STMicroelectronics datasheet (21 pp, sha256
dc3b85d8e0cb60ca, retrieved 2026-08-17, tier: manufacturer) - Extractor:
ds2sf(Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# LM293DT
**STMicroelectronics** · Comparators · SO-8
LM293DT from STMicroelectronics, in a SO-8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | Out1 | output | Comparator 1 open-collector output. Requires an external pull-up to VCC+ (typ. 5.1 kΩ). Can sink up to ~16 mA (Vid=1 V, Vo=1.5 V). |
| 2 | In1- | input | Comparator 1 inverting input. Common-mode input range includes ground; input voltage must not go more negative than 0.3 V below VCC-. |
| 3 | In1+ | input | Comparator 1 non-inverting input. Common-mode input range includes ground; up to (VCC+)-1.5 V at 25 °C. |
| 4 | Vcc- | power_in | Negative supply / ground pin. Tie to GND for single-supply operation (2 V to 36 V), or to a negative rail (down to -18 V) for split-supply operation. |
| 5 | In2+ | input | Comparator 2 non-inverting input. Common-mode input range includes ground; up to (VCC+)-1.5 V at 25 °C. |
| 6 | In2- | input | Comparator 2 inverting input. Common-mode input range includes ground; input voltage must not go more negative than 0.3 V below VCC-. |
| 7 | Out2 | output | Comparator 2 open-collector output. Requires an external pull-up to VCC+ (typ. 5.1 kΩ). Sinks up to ~16 mA at Vo=1.5 V. |
| 8 | Vcc+ | power_in | Positive supply pin. Single-supply range 2 V to 36 V (referenced to VCC-), or up to +18 V in a split-supply configuration. Typ. supply current 0.45 mA at 5 V. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | STMicroelectronics |
| Package | SO-8 |
| Category | Op-amp/Cmp |
| Pins | 8 |
## Ordering variants
Same part, different packaging or reel option.
- `LM293DT`
- `LM293DTPT`
- `LM293DTD`
- `LM293DTDR`
- `LM293DTST`
- `LM293DTCT`
## CAD (KiCad official)
- Symbol: `LM293DT`
- Footprint: `Package_SO:TI_SO-PowerPAD-8`
- 3D model: SO-8 (KiCad packages3D, STEP)
- 3D model files: `lm293dt-etched.step` / `lm293dt-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `lm293dt.step` / `lm293dt.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [STMicroelectronics datasheet](https://www.st.com/resource/en/datasheet/lm293dt.pdf) (21 pp, sha256 `dc3b85d8e0cb60ca`, retrieved 2026-08-17, tier: manufacturer)
- **Extractor:** `ds2sf` (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/lm293dt-datasheet.pdf)