component
LM293DR-HXY
Public Made by Adomby adom
HXY MOSFET Comparators, SOP-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
Generated by kicad-footprint-generator · KiCad file format 20260206
| Name | Last updated |
|---|---|
| docs | 13d ago |
| viewers | 13d ago |
| lm293dr-hxy-etched.glb | 13d ago |
| lm293dr-hxy-etched.step | 13d ago |
| lm293dr-hxy-hero.glb | 13d ago |
| lm293dr-hxy-hero.overlay.json | 13d ago |
| lm293dr-hxy.glb | 13d ago |
| lm293dr-hxy.kicad_mod | 13d ago |
| lm293dr-hxy.kicad_sym | 13d ago |
| lm293dr-hxy.lbr | 13d ago |
| lm293dr-hxy.step | 13d ago |
| package.json | 13d ago |
| page.json | 13d ago |
| README.md | 13d ago |
LM293DR-HXY
HXY MOSFET · Comparators · SOP-8
LM293DR-HXY from HXY MOSFET, in a SOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | OUT A | output | Comparator 1 open-collector output (NPN transistor with grounded emitter), sink current limited to about 16mA, load may connect to any supply within the allowed range. |
| 2 | IN1- | input | Comparator 1 inverting input; input common-mode range extends to ground, and input must not go below -0.3V. |
| 3 | IN1+ | input | Comparator 1 non-inverting input; input common-mode range extends to ground, and input must not go below -0.3V. |
| 4 | GND | power_in | Ground; unused comparator pins must be connected to ground. |
| 5 | IN2+ | input | Comparator 2 non-inverting input; input common-mode range extends to ground, and input must not go below -0.3V. |
| 6 | IN2- | input | Comparator 2 inverting input; input common-mode range extends to ground, and input must not go below -0.3V. |
| 7 | OUT B | output | Comparator 2 open-collector output (NPN transistor with grounded emitter), sink current limited to about 16mA, load may connect to any supply within the allowed range. |
| 8 | Vcc | power_in | Positive supply, 2.0V to 36V single supply (or ±1.0V to ±18V dual supply), with absolute maximum 36V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | HXY MOSFET |
| Package | SOP-8 |
| Category | Operational Amplifier/Comparator |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input offset voltage | VIO | 1 | 5 | mV | Ta=25℃ | 3 | |
| Input offset voltage | VIO | 9 | mV | 0℃≤Ta≤70℃ | 3 | ||
| Input offset current | IIO | 5 | 50 | nA | Ta=25℃ | 3 | |
| Input offset current | IIO | 150 | nA | 0℃≤Ta≤70℃ | 3 | ||
| Input bias current | IIB | 25 | 250 | nA | Ta=25℃ | 3 | |
| Input bias current | IIB | 400 | nA | 0℃≤Ta≤70℃ | 3 | ||
| Input common-mode voltage range (lower limit) | VICR | 0 | V | Ta=25℃; upper limit Vcc-1.5; 0℃≤Ta≤70℃ upper limit Vcc-2.0 | 3 | ||
| Supply current | Icc | 0.4 | 1 | mA | RL=∞, both comparators | 3 | |
| Supply current | Icc | 2.5 | mA | RL=∞, both comparators, Vcc=30V | 3 | ||
| Voltage gain | Gv | 50 | 200 | V/mV | RL≥15K, Vcc=15V | 3 | |
| Large signal response time | tRES | 300 | ns | VIN=TTL logic swing, VREF=1.4V, VRL=5.0V, RL=5.1K | 3 | ||
| Response time | tRES | 1.3 | ns | VRL=5.0V, RL=5.1K | 3 | ||
| Output sink current | ISINK | 6 | 16 | mA | VIN(-)≥1.0V, VIN(+)=0V, Vo≤1.5V | 3 | |
| Output saturation voltage | VSAT | 150 | 400 | mV | VIN(-)≥1.0V, VIN(+)=0V, ISINK≤4.0mA | 3 | |
| Output saturation voltage | VSAT | 700 | mV | VIN(-)≥1.0V, VIN(+)=0V, ISINK≤4.0mA, 0℃≤Ta≤70℃ | 3 | ||
| Output leakage current | IOL | 0.1 | nA | VIN(+)≥1.0V, VIN(-)=0V, Vo=5.0V | 3 | ||
| Output leakage current | IOL | 1000 | nA | VIN(+)≥1.0V, VIN(-)=0V, Vo=30V, 0℃≤Ta≤70℃ | 3 | ||
| Supply voltage, single supply | Vcc | 36 | V | Tamb=25℃ | 2 | ||
| Supply voltage, dual supply | Vcc | -18 | 18 | V | Tamb=25℃ | 2 | |
| Input differential voltage | VIDR | 36 | V | Tamb=25℃ | 2 | ||
| Input common-mode voltage | VICR | -0.3 | 36 | V | Tamb=25℃ | 2 | |
| Output short-circuit to ground current | IOG | 20 | mA | Tamb=25℃ | 2 | ||
| Maximum junction temperature | TJ(MAX) | 125 | ℃ | 2 | |||
| Power dissipation | PD | 570 | mW | Tamb=25℃ | 2 | ||
| Operating ambient temperature | Tamb | 0 | 70 | ℃ | 2 | ||
| Storage temperature | Tstg | -65 | 150 | ℃ | 2 | ||
| Operating supply voltage, single supply | Vcc | 2 | 36 | V | Single supply | 1 | |
| Operating supply voltage, dual supply | -18 | 18 | V | Dual supply, printed as 1.0V~18V | 1 |
CAD (KiCad official)
- Symbol:
LM293DR-HXY - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOP-8 (KiCad packages3D, STEP)
- 3D model files:
lm293dr-hxy-etched.step/lm293dr-hxy-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);lm293dr-hxy.step/lm293dr-hxy.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: HXY MOSFET datasheet (6 pp, sha256
2ee067253cca573d, retrieved 2026-10-24, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).