Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

LM293DGKR

Texas Instruments · Comparators · VSSOP-8 (DGK)

LM293DGKR from Texas Instruments, in a VSSOP-8 (DGK). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). The symbol is generated from that pin table, the footprint is an Adom_Gen land derived from the manufacturer drawing, and the 3D model is generated to fit it.

Pinout

Pin Name Type Function
1 1OUT output Comparator 1 output, rated to sink or source 20 mA with TTL/MOS/CMOS logic compatibility.
2 1IN- input Comparator 1 negative input, accepts common-mode input voltage from 0 to VCC-2V.
3 1IN+ input Comparator 1 positive input, accepts common-mode input voltage from 0 to VCC-2V.
4 GND power_in Ground reference pin for both comparators.
5 2IN+ input Comparator 2 positive input, accepts common-mode input voltage from 0 to VCC-2V.
6 2IN- input Comparator 2 negative input, accepts common-mode input voltage from 0 to VCC-2V.
7 2OUT output Comparator 2 output, rated to sink or source 20 mA with TTL/MOS/CMOS logic compatibility.
8 VCC power_in Positive supply voltage pin, rated from 2 to 30 V for LM293 variants.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package VSSOP-8 (DGK)
Category Operational Amplifier/Comparator
Pins 8

CAD (Adom-generated)

  • Symbol: LM293DGKR
  • Footprint: Adom_Gen:Texas_Instruments_DGK0008A
  • 3D model: generated to fit the land (STEP)
  • 3D model files: lm293dgkr-etched.step / lm293dgkr-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); lm293dgkr.step / lm293dgkr.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (56 pp, sha256 f28830c2f4cbd9ef, retrieved 2026-11-21)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-4-5-20251001 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: symbol generated from the datasheet pin table; footprint an Adom_Gen land derived from the manufacturer drawing; 3D model generated to fit that land. Land: TI DGK0008A EXAMPLE BOARD LAYOUT (4214862/A), this part sheet p.38, LAND PATTERN EXAMPLE: 8X pads 1.4 x 0.45 mm, (R0.05) TYP corners, 6X pitch 0.65 mm, pad row centre-to-centre (4.4) mm, so pads at x = +/-2.2, y = +/-0.325, +/-0.975. Body from PACKAGE OUTLINE p.37: 3.0 x 3.0 (2.9-3.1) mm, 1.1 mm max height, lead span 4.75-5.05. Task master ruling 2026-11-21: the maker's printed land wins over VSSOP-8_2.3x2mm_P0.5mm (a 0.5-pitch land) and KiCad's VSSOP-8_3x3mm_P0.65mm (1.625 x 0.5 at +/-2.1125).

Datasheet PDF