main
Ray
lm293adgkr: laser-etched CAD + chip hero (factory 2.0.0 backfill)
ef242ec
LM293ADGKR
Texas Instruments · Comparators · VSSOP-8
LM293ADGKR from Texas Instruments, in a VSSOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | 1OUT | output | Open-collector output of comparator 1. Requires an external pull-up resistor to VCC. |
| 2 | 2OUT | output | Open-collector output of comparator 2. Requires an external pull-up resistor to VCC. |
| 3 | VCC | power_in | Positive supply voltage. Single supply 2 V to 36 V, or split supply +/-1 V to +/-18 V. |
| 4 | 2IN- | input | Inverting input of comparator 2. |
| 5 | 2IN+ | input | Non-inverting input of comparator 2. |
| 6 | 1IN- | input | Inverting input of comparator 1. |
| 7 | 1IN+ | input | Non-inverting input of comparator 1. |
| 8 | GND | power_in | Ground / negative supply reference. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | VSSOP-8 |
| Category | Op-amp/Cmp |
| Pins | 8 |
Ordering variants
Same part, different packaging or reel option.
LM293ADGKRLM293ADGKRDGKTLM293ADGKRDRLM293ADGKRDLM293ADGKRPWRLM293ADGKRPW
CAD (KiCad official)
- Symbol:
LM293ADGKR - Footprint:
Package_SO:VSSOP-8_2.3x2mm_P0.5mm - 3D model: VSSOP-8 (KiCad packages3D, STEP)
- 3D model files:
lm293adgkr-etched.step/lm293adgkr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);lm293adgkr.step/lm293adgkr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (56 pp, sha256
dd9f3d029261a161, retrieved 2026-08-17, tier: manufacturer) - Extractor:
ds2sf(Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# LM293ADGKR
**Texas Instruments** · Comparators · VSSOP-8
LM293ADGKR from Texas Instruments, in a VSSOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | 1OUT | output | Open-collector output of comparator 1. Requires an external pull-up resistor to VCC. |
| 2 | 2OUT | output | Open-collector output of comparator 2. Requires an external pull-up resistor to VCC. |
| 3 | VCC | power_in | Positive supply voltage. Single supply 2 V to 36 V, or split supply +/-1 V to +/-18 V. |
| 4 | 2IN- | input | Inverting input of comparator 2. |
| 5 | 2IN+ | input | Non-inverting input of comparator 2. |
| 6 | 1IN- | input | Inverting input of comparator 1. |
| 7 | 1IN+ | input | Non-inverting input of comparator 1. |
| 8 | GND | power_in | Ground / negative supply reference. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | VSSOP-8 |
| Category | Op-amp/Cmp |
| Pins | 8 |
## Ordering variants
Same part, different packaging or reel option.
- `LM293ADGKR`
- `LM293ADGKRDGKT`
- `LM293ADGKRDR`
- `LM293ADGKRD`
- `LM293ADGKRPWR`
- `LM293ADGKRPW`
## CAD (KiCad official)
- Symbol: `LM293ADGKR`
- Footprint: `Package_SO:VSSOP-8_2.3x2mm_P0.5mm`
- 3D model: VSSOP-8 (KiCad packages3D, STEP)
- 3D model files: `lm293adgkr-etched.step` / `lm293adgkr-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `lm293adgkr.step` / `lm293adgkr.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/lit/ds/symlink/lm293a.pdf) (56 pp, sha256 `dd9f3d029261a161`, retrieved 2026-08-17, tier: manufacturer)
- **Extractor:** `ds2sf` (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/lm293adgkr-datasheet.pdf)