main
Ray
Publish 0.1.0
b26d9c8
LM2937IMPX-2.5
Texas Instruments · Linear Voltage Regulators (LDO) · SOT-223-4
LM2937IMPX-2.5 from Texas Instruments, in a SOT-223-4. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | INPUT | input | Unregulated voltage input with continuous VIN up to 26 V and transient up to 60 V for t ≤ 100 ms. |
| 2 | GND | power_in | Ground reference pin, and the tab is internally connected to this pin. |
| 3 | OUTPUT | output | Regulated voltage output that requires an output capacitor for stability, and the device is stable for output capacitor ESR below 3 Ω. |
| 4 | TAB | power_in | Thermal and ground connection that should go to a large copper area and must not be connected to any potential other than GND at pin 2. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SOT-223-4 |
| Category | Power Supply Chip |
| Pins | 4 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Junction temperature (TJ) | TJ | -40 | 85 | °C | LM2937IMP (DCY) | 4 | |
| Input voltage (VIN) | VIN | 26 | V | Minimum is VOUT + 1V | 4 | ||
| Continuous input voltage (VIN) | VIN | 26 | V | Continuous | 4 | ||
| Transient input voltage (VIN) | VIN | 60 | V | Transient, t ≤ 100 ms | 4 | ||
| Maximum junction temperature | TJ | 150 | °C | 4 | |||
| Storage temperature range | Tstg | -65 | 150 | °C | 4 | ||
| Junction-to-ambient thermal resistance | RθJA | 58.3 | °C/W | DCY 4-pin (SOT-223) package | 4 | ||
| Junction-to-case (top) thermal resistance | RθJC(top) | 39.2 | °C/W | DCY 4-pin (SOT-223) package | 4 | ||
| Junction-to-case (bottom) thermal resistance | RθJC(bot) | 22.5 | °C/W | DCY 4-pin (SOT-223) package | 4 | ||
| Junction-to-top characterization parameter | ψJT | 7 | °C/W | DCY 4-pin (SOT-223) package | 4 | ||
| Junction-to-board characterization parameter | ψJB | 1.6 | °C/W | DCY 4-pin (SOT-223) package | 4 |
Materials and finish
As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| contacts | copper | is practical to the package. The ground connections for CIN and COUT should be back to the LM2937 ground pin using as wide, and as short, of a copper trace as is practical. | 18 |
CAD (KiCad official)
- Symbol:
LM2937IMPX-2.5 - Footprint:
Package_TO_SOT_SMD:SOT-223 - 3D model: SOT-223-4 (KiCad packages3D, STEP)
- 3D model files:
lm2937impx-2-5-etched.step/lm2937impx-2-5-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);lm2937impx-2-5.step/lm2937impx-2-5.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (34 pp, sha256
93316285641d2e4f, retrieved 2026-10-28, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# LM2937IMPX-2.5
**Texas Instruments** · Linear Voltage Regulators (LDO) · SOT-223-4
LM2937IMPX-2.5 from Texas Instruments, in a SOT-223-4. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | INPUT | input | Unregulated voltage input with continuous VIN up to 26 V and transient up to 60 V for t ≤ 100 ms. |
| 2 | GND | power_in | Ground reference pin, and the tab is internally connected to this pin. |
| 3 | OUTPUT | output | Regulated voltage output that requires an output capacitor for stability, and the device is stable for output capacitor ESR below 3 Ω. |
| 4 | TAB | power_in | Thermal and ground connection that should go to a large copper area and must not be connected to any potential other than GND at pin 2. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SOT-223-4 |
| Category | Power Supply Chip |
| Pins | 4 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Junction temperature (TJ) | TJ | -40 | | 85 | °C | LM2937IMP (DCY) | 4 |
| Input voltage (VIN) | VIN | | | 26 | V | Minimum is VOUT + 1V | 4 |
| Continuous input voltage (VIN) | VIN | | | 26 | V | Continuous | 4 |
| Transient input voltage (VIN) | VIN | | | 60 | V | Transient, t ≤ 100 ms | 4 |
| Maximum junction temperature | TJ | | | 150 | °C | | 4 |
| Storage temperature range | Tstg | -65 | | 150 | °C | | 4 |
| Junction-to-ambient thermal resistance | RθJA | | 58.3 | | °C/W | DCY 4-pin (SOT-223) package | 4 |
| Junction-to-case (top) thermal resistance | RθJC(top) | | 39.2 | | °C/W | DCY 4-pin (SOT-223) package | 4 |
| Junction-to-case (bottom) thermal resistance | RθJC(bot) | | 22.5 | | °C/W | DCY 4-pin (SOT-223) package | 4 |
| Junction-to-top characterization parameter | ψJT | | 7 | | °C/W | DCY 4-pin (SOT-223) package | 4 |
| Junction-to-board characterization parameter | ψJB | | 1.6 | | °C/W | DCY 4-pin (SOT-223) package | 4 |
## Materials and finish
As the datasheet states them (page.json `metadata.appearance`; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| contacts | copper | | is practical to the package. The ground connections for CIN and COUT should be back to the LM2937 ground pin using as wide, and as short, of a copper trace as is practical. | 18 |
## CAD (KiCad official)
- Symbol: `LM2937IMPX-2.5`
- Footprint: `Package_TO_SOT_SMD:SOT-223`
- 3D model: SOT-223-4 (KiCad packages3D, STEP)
- 3D model files: `lm2937impx-2-5-etched.step` / `lm2937impx-2-5-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `lm2937impx-2-5.step` / `lm2937impx-2-5.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/lit/ds/symlink/lm2937impx-2.5.pdf) (34 pp, sha256 `93316285641d2e4f`, retrieved 2026-10-28, tier: manufacturer)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/lm2937impx-2-5-datasheet.pdf)