main
Ray Publish 0.1.0 a2213d3

LM2936QMPX-5.0

Texas Instruments · Linear Voltage Regulators (LDO) · SOT-223-4

LM2936QMPX-5.0 from Texas Instruments, in a SOT-223-4. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 IN input Unregulated input voltage.
2 GND power_in Ground.
3 OUT power_out Regulated output voltage that requires a minimum output capacitance, with specific ESR, on this pin to maintain stability.
4 GND power_in Ground; this pin is also the tab of the SOT-223 package.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package SOT-223-4
Category Power Supply Chip
Pins 4

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Output voltage VOUT 4.9 5 5.1 V VIN = 14 V, IOUT = 10 mA, TJ = 25°C 6
Output voltage over line, load and temperature VOUT 4.85 5 5.15 V 5.5 V ≤ VIN ≤ 26 V, 100 µA ≤ IOUT ≤ 50 mA, -40°C ≤ TJ ≤ 125°C 7
Quiescent current IQ 9 15 μA IOUT = 100 μA, 8 V ≤ VIN ≤ 24 V 7
Quiescent current IQ 0.2 0.5 mA IOUT = 10 mA, 8 V ≤ VIN ≤ 24 V 7
Quiescent current IQ 1.5 2.5 mA IOUT = 50 mA, 8 V ≤ VIN ≤ 24 V 7
Line regulation 5 10 mV 9 V ≤ VIN ≤ 16 V 7
Line regulation 10 30 mV 6 V ≤ VIN ≤ 40 V, IOUT = 1 mA 7
Load regulation 10 30 mV 100 μA ≤ IOUT ≤ 5 mA 7
Dropout voltage 0.05 0.1 V IOUT = 100 μA 7
Dropout voltage 0.2 0.4 V IOUT = 50 mA 7
Short-circuit current 65 120 250 mA VOUT = 0 V 7
Ripple rejection -40 -60 dB Vripple = 1 Vrms, ƒripple = 120 Hz 7
Reverse polarity transient input voltage -50 -80 V RL = 500 Ω, T = 1 ms 7
Output voltage with reverse polarity input VOUT 0 -0.3 V VIN = −15 V, RL = 500 Ω 7
Maximum line transient 60 V RL = 500 Ω, VOUT ≤ 5.5 V, T = 40 ms 7
Output bypass capacitance ESR ESR 0.3 8 Ω COUT = 10 µF, 0.1 mA ≤ IOUT ≤ 50 mA 7
Input voltage (survival) VIN -50 60 V 4
Junction temperature, TJMAX TJMAX 150 °C 4
Storage temperature Tstg -65 150 °C 4
Temperature, junction TJ -40 125 °C 4
Input voltage, VIN (LM2936Q) VIN 5.5 40 V 4
Output impedance 450 mΩ IOUT = 30 mAdc and 10 mArms, ƒ = 1000 Hz 7
Output noise voltage 500 μV 10 Hz-100 kHz 7
Long-term stability 20 mV/1000 Hr 7
Junction-to-ambient thermal resistance (SOT-223, High-K) RθJA 62.8 °C/W High-K JEDEC board 4
Junction-to-case (top) thermal resistance (SOT-223) RθJC(top) 44.2 °C/W 4
Junction-to-board thermal resistance (SOT-223) RθJB 11.7 °C/W 4
Junction-to-top characterization parameter (SOT-223) ψJT 3.6 °C/W 4
Junction-to-board characterization parameter (SOT-223) ψJB 11.6 °C/W 4

Materials and finish

As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).

Part Material Colour / plating Datasheet says Page
contacts copper On the 8-pin SOIC (D) package, the four ground pins are thermally connected to the backside of the die. Adding approximately 0.04 square inches of 2 oz. copper pad area to these four pins improves the 15

CAD (KiCad official)

  • Symbol: LM2936QMPX-5.0
  • Footprint: Package_TO_SOT_SMD:SOT-223
  • 3D model: SOT-223-4 (KiCad packages3D, STEP)
  • 3D model files: lm2936qmpx-5-0-etched.step / lm2936qmpx-5-0-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); lm2936qmpx-5-0.step / lm2936qmpx-5-0.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (36 pp, sha256 d4f347dc2a9d21ad, retrieved 2026-10-28, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF