main
Ray
lm2936mx-5-0: laser-etched CAD + chip hero (factory 2.0.0 backfill)
97a2a7a
LM2936MX-5.0
Texas Instruments LM2936MX 5 0 NOPB · Voltage Regulators - Linear, Low Drop Out (LDO) Regulators · SOIC-8
LM2936MX-5.0 from Texas Instruments LM2936MX 5 0 NOPB, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | OUT | power_out | Regulated 5-V output, 50-mA maximum. Requires a minimum output capacitor (typically 10 µF) with specific ESR on this pin to maintain loop stability. Locate the capacitor as close as possible to the OUT and GND pins. |
| 2 | GND | power_in | Ground reference for the regulator. Pins 2, 3, 6 and 7 are all tied to internal ground on the LM2936M SOIC package and should all be connected to the board ground plane. |
| 3 | GND | power_in | Ground reference for the regulator. Tie to board ground; also serves as part of the heat conduction path on the SOIC-8 package. |
| 4 | NC | unconnected | No internal connection. May be left open or connected to GND. The LM2936M (non-BM) variant does not implement the shutdown function on this pin. |
| 5 | NC | unconnected | No internal connection. May be left open or connected to GND. On the LM2936BM variant this pin is the SD (shutdown) input; on the standard LM2936M SOIC it is unused. |
| 6 | GND | power_in | Ground reference for the regulator. Tie to board ground. |
| 7 | GND | power_in | Ground reference for the regulator. Tie to board ground; also aids in heat-sinking on the SOIC-8 package. |
| 8 | IN | power_in | Unregulated input voltage, 5.5 V to 40 V operating range (survival −50 V to +60 V). A 100-nF ceramic bypass capacitor is recommended when the regulator is located more than 2 inches from the supply filter capacitor. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments LM2936MX 5 0 NOPB |
| Package | SOIC-8 |
| Category | PMIC |
| Pins | 8 |
Ordering variants
LM2936MX-5.0LM2936M-5.0LM2936MX-5.0LM2936MX-5.0LM2936BM-5.0LM2936MX-5.0LM2936MMLM2936MX-5.0LM2936MPLM2936MX-5.0LM2936DTLM2936MX-5.0LM2936Z
CAD (KiCad official)
- Symbol:
LM2936MX-5.0 - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOIC-8 (KiCad packages3D, STEP)
- 3D model files:
lm2936mx-5-0-etched.step/lm2936mx-5-0-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);lm2936mx-5-0.step/lm2936mx-5-0.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments LM2936MX 5 0 NOPB datasheet (None pp, sha256
8cf93475c9f18c6c, retrieved 2026-08-17, tier: manufacturer) - Extractor:
ds2sf(Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# LM2936MX-5.0
**Texas Instruments LM2936MX 5 0 NOPB** · Voltage Regulators - Linear, Low Drop Out (LDO) Regulators · SOIC-8
LM2936MX-5.0 from Texas Instruments LM2936MX 5 0 NOPB, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | OUT | power_out | Regulated 5-V output, 50-mA maximum. Requires a minimum output capacitor (typically 10 µF) with specific ESR on this pin to maintain loop stability. Locate the capacitor as close as possible to the OUT and GND pins. |
| 2 | GND | power_in | Ground reference for the regulator. Pins 2, 3, 6 and 7 are all tied to internal ground on the LM2936M SOIC package and should all be connected to the board ground plane. |
| 3 | GND | power_in | Ground reference for the regulator. Tie to board ground; also serves as part of the heat conduction path on the SOIC-8 package. |
| 4 | NC | unconnected | No internal connection. May be left open or connected to GND. The LM2936M (non-BM) variant does not implement the shutdown function on this pin. |
| 5 | NC | unconnected | No internal connection. May be left open or connected to GND. On the LM2936BM variant this pin is the SD (shutdown) input; on the standard LM2936M SOIC it is unused. |
| 6 | GND | power_in | Ground reference for the regulator. Tie to board ground. |
| 7 | GND | power_in | Ground reference for the regulator. Tie to board ground; also aids in heat-sinking on the SOIC-8 package. |
| 8 | IN | power_in | Unregulated input voltage, 5.5 V to 40 V operating range (survival −50 V to +60 V). A 100-nF ceramic bypass capacitor is recommended when the regulator is located more than 2 inches from the supply filter capacitor. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments LM2936MX 5 0 NOPB |
| Package | SOIC-8 |
| Category | PMIC |
| Pins | 8 |
## Ordering variants
- `LM2936MX-5.0LM2936M-5.0`
- `LM2936MX-5.0`
- `LM2936MX-5.0LM2936BM-5.0`
- `LM2936MX-5.0LM2936MM`
- `LM2936MX-5.0LM2936MP`
- `LM2936MX-5.0LM2936DT`
- `LM2936MX-5.0LM2936Z`
## CAD (KiCad official)
- Symbol: `LM2936MX-5.0`
- Footprint: `Package_SO:SOIC-8_3.9x4.9mm_P1.27mm`
- 3D model: SOIC-8 (KiCad packages3D, STEP)
- 3D model files: `lm2936mx-5-0-etched.step` / `lm2936mx-5-0-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `lm2936mx-5-0.step` / `lm2936mx-5-0.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Texas Instruments LM2936MX 5 0 NOPB datasheet](https://www.ti.com/lit/ds/symlink/lm2936mx-5.0.pdf) (None pp, sha256 `8cf93475c9f18c6c`, retrieved 2026-08-17, tier: manufacturer)
- **Extractor:** `ds2sf` (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/lm2936mx-5-0-datasheet.pdf)