main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs lm2931ad-5-0r2g: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
viewers lm2931ad-5-0r2g: viewers · Ray
lm2931ad-5-0r2g-etched.fit.json lm2931ad-5-0r2g: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
lm2931ad-5-0r2g-etched.glb lm2931ad-5-0r2g: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
lm2931ad-5-0r2g-etched.step lm2931ad-5-0r2g: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
lm2931ad-5-0r2g-hero.glb Publish 0.2.1 · Ray
lm2931ad-5-0r2g-hero.overlay.json Publish 0.2.1 · Ray
lm2931ad-5-0r2g.glb Publish 0.1.0 · Ray
lm2931ad-5-0r2g.kicad_mod Publish 0.1.0 · Ray
lm2931ad-5-0r2g.kicad_sym Publish 0.1.0 · Ray
lm2931ad-5-0r2g.lbr Publish 0.1.0 · Ray
lm2931ad-5-0r2g.step Publish 0.1.0 · Ray
package.json Publish 0.2.1 · Ray
page.json Publish 0.2.1 · Ray
README.md lm2931ad-5-0r2g: laser-etched CAD + chip hero (factory 2.0.0 backfill) · Ray

LM2931AD-5.0R2G

onsemi · Voltage Regulators - Linear, Low Drop Out (LDO) Regulators · SOIC-8

LM2931AD-5.0R2G from onsemi, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 Output power_out Regulated 5.0 V output. Delivers up to 100 mA with a dropout of ~0.16 V at 100 mA (0.015 V at 10 mA). Requires an external output capacitor for stability; recommended value 22 uF or greater with ESR in the stable region (see Figure 23).
2 GND power_in Device ground / return. Pins 2, 3, 6 and 7 are internally connected to the die-attach paddle and are shown bracketed together on the SOIC-8 fixed pinout; tie all four to the ground plane to help remove heat.
3 GND power_in Device ground / return. Bracketed with pins 2, 6 and 7 on the SOIC-8 fixed pinout - tie all together to the ground plane for heat spreading.
4 NC unconnected No connection on the fixed-output SOIC-8 variant. Leave floating or tie to ground; do not use as a signal node.
5 NC unconnected No connection on the fixed-output SOIC-8 variant. Leave floating or tie to ground; do not use as a signal node.
6 GND power_in Device ground / return. Bracketed with pins 2, 3 and 7 on the SOIC-8 fixed pinout - tie all together to the ground plane for heat spreading.
7 GND power_in Device ground / return. Bracketed with pins 2, 3 and 6 on the SOIC-8 fixed pinout - tie all together to the ground plane for heat spreading.
8 Input power_in Unregulated supply input. Continuous operating range 6.0-26 V, absolute max 40 Vdc continuous, 60 Vpk transient (load dump), and survives -50 Vpk reverse polarity. An input bypass capacitor (0.1 uF typ) is recommended if the regulator is >=4 inches from the supply.

Key specifications

Parameter Value
Manufacturer onsemi
Package SOIC-8
Category PMIC
Pins 8

Ordering variants

Same part, different packaging or reel option.

  • LM2931AD-5.0R2GD
  • LM2931AD-5.0R2G
  • LM2931AD-5.0R2GDR2G
  • LM2931AD-5.0R2GZ
  • LM2931AD-5.0R2GT
  • LM2931AD-5.0R2GDT
  • LM2931AD-5.0R2GD2T
  • LM2931AD-5.0R2GST
  • LM2931AD-5.0R2GTH
  • LM2931AD-5.0R2GTV
  • LM2931AD-5.0R2GT (5-lead)
  • LM2931AD-5.0R2GD2T (5-lead)

CAD (KiCad official)

  • Symbol: LM2931AD-5.0R2G
  • Footprint: Package_SO:SOIC-8_3.9x4.9mm_P1.27mm
  • 3D model: SOIC-8 (KiCad packages3D, STEP)
  • 3D model files: lm2931ad-5-0r2g-etched.step / lm2931ad-5-0r2g-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); lm2931ad-5-0r2g.step / lm2931ad-5-0r2g.glb are the bare package body.

3D model downloads

Two STEP files. Same geometry, different body top:

File Size Use it when
lm2931ad-5-0r2g.step 122 KB You want the bare part, or you mark your own boards.
lm2931ad-5-0r2g-etched.step 2.8 MB You want the part with LM2931AD-5.0R2G already on it.

The marking in the etched file is real recessed geometry cut into the solid, not a texture or a decal: 684 faces against 147 in the bare model. It survives export, section views, and rendering in any CAD tool, and it drops straight into KiCad or Fusion with no extra setup.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: onsemi datasheet (27 pp, sha256 b141936e66454b38, retrieved 2026-08-17, tier: manufacturer)
  • Extractor: ds2sf (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF