main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs Publish 0.1.0 · Ray
viewers lm2917mx: viewers rendered from the public page · Ray
lm2917mx-etched.glb Publish 0.1.0 · Ray
lm2917mx-etched.step lm2917mx: factory component page (tier=mfr) · Ray
lm2917mx-hero.glb lm2917mx: hero GLB from the etched model (keeps the MPN mark) · Ray
lm2917mx-hero.overlay.json Publish 0.1.0 · Ray
lm2917mx.glb Publish 0.1.0 · Ray
lm2917mx.kicad_mod Publish 0.1.0 · Ray
lm2917mx.kicad_sym Publish 0.1.0 · Ray
lm2917mx.lbr Publish 0.1.0 · Ray
lm2917mx.step Publish 0.1.0 · Ray
package.json Publish 0.1.0 · Ray
page.json Set visibility: public · Ray
README.md Publish 0.1.0 · Ray
verification.json Verified: Published by the parts factory: tier mfr, 14 pins · Ray

LM2917MX

Texas Instruments · V/F And F/V Converters · SOIC-14

LM2917MX from Texas Instruments, in a SOIC-14. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 TACH+ input Positive terminal for the input signal that leads to the noninverting terminal of the internal Schmitt-Trigger comparator.
2 CP1 output A capacitor on this pin is charged to VCC/2 by a 180 µA typical constant current source at the start of each positive half cycle and discharged at the same rate during each negative half cycle.
3 CP2 output Charge-pump output that sources current equal to the absolute value of the CP1 capacitor current, with a parallel resistor and capacitor filtering the pulses into the output voltage.
4 IN+ input Noninverting input to the high-gain op amp.
5 EMIT output Emitter of the bipolar junction transistor.
6 NC unconnected No connect pin.
7 NC unconnected No connect pin.
8 COL input Collector of the bipolar junction transistor.
9 V+ power_in Supply voltage pin for the device.
10 IN- input Inverting input to the high-gain op amp.
11 TACH- input Negative terminal for the input signal that leads to the noninverting terminal of the internal Schmitt-Trigger comparator.
12 GND power_in Ground reference for the device.
13 NC unconnected No connect pin.
14 NC unconnected No connect pin.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package SOIC-14
Category Data Acquisition
Pins 14

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Supply voltage 28 V 5
Supply current (Zener options) 25 mA 5
Collector voltage 28 V 5
Differential input voltage (tachometer, op amp, comparator) 28 V 5
Input voltage, tachometer (LM29x7 14-pin) 0 28 V 5
Input voltage, op amp and comparator 0 28 V 5
Power dissipation (LM29x7 14-pin) 1580 mW 5
Soldering temperature, SOIC vapor phase 215 °C 60 s 5
Soldering temperature, SOIC infrared 220 °C 15 s 5
Operating temperature, TJ TJ -40 85 °C 5
Storage temperature Tstg -65 150 °C 5
Input voltage, tachometer (LM29x7 14-pin) 0 28 V 5
Output sink current 50 mA 5
Input thresholds 10 25 40 mV VIN = 250 mVp-p at 1 kHz 6
LM29x7 offset voltage (14-pin) 3.5 10 mV VIN = 250 mVp-p at 1 kHz 6
Input bias current 0.1 1 µA VIN = ±50 mVDC 6
Output current (I2, I3) I2, I3 140 180 240 µA V2 = V3 = 6 V 6
Gain constant K 0.9 1 1.1 6
Linearity -1 0.3 1 % fIN = 1 kHz, 5 kHz, or 10 kHz 6
Op amp input offset voltage VOS 3 10 mV VIN = 6 V 6
Op amp bias current IBIAS 50 500 nA VIN = 6 V 6
Input common-mode voltage 0 V 6
Output sink current 40 50 mA VC = 1 6
Saturation voltage (ISINK = 5 mA) 0.1 0.5 V ISINK = 5 mA 6
Saturation voltage (ISINK = 50 mA) 1 1.5 V ISINK = 50 mA 6
Series resistance 10.5 15 Ω 6
Total supply current 3.8 6 mA 6
Junction-to-ambient thermal resistance (D SOIC 14-pin) RθJA 83.7 °C/W D (SOIC) 14 pins 6
Junction-to-case (top) thermal resistance (D SOIC 14-pin) RθJC(top) 42.1 °C/W D (SOIC) 14 pins 6
Junction-to-board thermal resistance (D SOIC 14-pin) RθJB 38 °C/W D (SOIC) 14 pins 6
Junction-to-top characterization parameter (D SOIC 14-pin) ψJT 7.7 °C/W D (SOIC) 14 pins 6
Junction-to-board characterization parameter (D SOIC 14-pin) ψJB 37.7 °C/W D (SOIC) 14 pins 6

CAD (KiCad official)

  • Symbol: LM2917MX
  • Footprint: Package_SO:SOIC-14_3.9x8.7mm_P1.27mm
  • 3D model: SOIC-14 (KiCad packages3D, STEP)
  • 3D model files: lm2917mx-etched.step / lm2917mx-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); lm2917mx.step / lm2917mx.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (44 pp, sha256 7eb159d92fb097b9, retrieved 2026-11-10, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF