component
LM29150T-5.0
Public Made by Adomby adom
HTC Korea TAEJIN Tech Voltage Regulators - Linear, Low Drop Out (LDO) Regulators, TO-220. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownLM29150T-5.0
HTC Korea TAEJIN Tech · Voltage Regulators - Linear, Low Drop Out (LDO) Regulators · TO-220
LM29150T-5.0 from HTC Korea TAEJIN Tech, in a TO-220. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VIN | power_in | Input supply pin; the datasheet gives a recommended operating input voltage up to 26 V, with transients to 60 V allowed for under 100 ms at 1% duty cycle. |
| 2 | GND | power_in | Ground reference pin; the ground pin current is the regulator quiescent current and adds to the load current drawn from the source. |
| 3 | VOUT | power_out | Regulated 5.0 V output; the datasheet requires an output capacitor of at least 10 µF to keep the regulator stable at full load of 1.5 A. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | HTC Korea TAEJIN Tech |
| Package | TO-220 |
| Category | Power Management (PMIC) |
| Pins | 3 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Output Voltage accuracy, IO = 10mA | VOUT | -1 | 1 | % | IO = 10mA | 6 | |
| Output Voltage accuracy, 10mA to full load | VOUT | -2 | 2 | % | 10mA≤IO≤IFL, (VOUT+1V)≤VIN≤26V (Note 2) | 6 | |
| Line Regulation | ΔVLINE | 0.06 | 0.5 | % | IO = 10mA, (VOUT+1V)≤VIN≤26V | 6 | |
| Load Regulation | ΔVLOAD | 0.2 | 1 | % | VIN=VOUT+5V, 10mA≤IOUT≤IFULLOAD (Note 2,6) | 6 | |
| Output Voltage Temperature Coefficient | ΔVo/ΔT | 20 | 100 | ppm/℃ | Note 6 | 6 | |
| Dropout Voltage at 100mA | VDO | 80 | 200 | mV | ΔVOUT = -1%, IO = 100mA (Note 3) | 6 | |
| Dropout Voltage at 750mA | VDO | 220 | 600 | mV | ΔVOUT = -1%, IO = 750mA (Note 3) | 6 | |
| Dropout Voltage at 1.5A | VDO | 350 | mV | ΔVOUT = -1%, IO = 1.5A (Note 3) | 6 | ||
| Ground Current at 750mA | IGND | 8 | 20 | mA | IO = 750mA, VIN = VOUT+1V | 6 | |
| Ground Current at 1.5A | IGND | 22 | mA | IO = 1.5A | 6 | ||
| Ground Pin Current at Dropout | IGNDDO | 2 | mA | VIN = 0.5V less than specified VOUT, IOUT = 10mA | 6 | ||
| Current Limit | ILIMIT | 2.1 | 3.5 | A | VOUT = 0V (Note 4) | 6 | |
| Output Noise Voltage (10Hz to 100kHz), CL = 10μF | en | 400 | μVRMS | IL = 100mA, CL = 10μF | 6 | ||
| Output Noise Voltage (10Hz to 100kHz), CL = 33μF | en | 260 | μVRMS | IL = 100mA, CL = 33μF | 6 | ||
| Input Supply Voltage | VIN | -20 | 60 | V | Note 1 | 1 | |
| Lead Temperature (Soldering) | TSOL | 260 | ℃ | Soldering, 5 sec | 1 | ||
| Storage Temperature Range | TSTG | -65 | 150 | ℃ | 1 | ||
| Operating Input Voltage | VIN | 26 | V | 2 | |||
| Junction Temperature | TJ | -40 | 125 | ℃ | 2 | ||
| Case-to-sink thermal resistance term (design formula) | θCS | 0 | 2 | ℃/W | Stated range in thermal design formula | 9 |
CAD (KiCad official)
- Symbol:
LM29150T-5.0 - Footprint:
Package_TO_SOT_THT:TO-220-3_Vertical - 3D model: TO-220 (KiCad packages3D, STEP)
- 3D model files:
lm29150t-5-0-etched.step/lm29150t-5-0-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);lm29150t-5-0.step/lm29150t-5-0.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: HTC Korea TAEJIN Tech datasheet (12 pp, sha256
edf268513dcf5ffe, retrieved 2026-10-19, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).