component
LM2904TH-13
Public Made by Adomby adom
Diodes Incorporated Operational Amplifier, TSSOP-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
Made with KiCad 10.0 · needs KiCad 10.0 or later to open · KiCad file format 20260206
| Name | Last updated |
|---|---|
| docs | 6d ago |
| viewers | 6d ago |
| lm2904th-13-etched.glb | 6d ago |
| lm2904th-13-etched.step | 6d ago |
| lm2904th-13-hero.glb | 6d ago |
| lm2904th-13-hero.overlay.json | 6d ago |
| lm2904th-13.glb | 6d ago |
| lm2904th-13.kicad_mod | 6d ago |
| lm2904th-13.kicad_sym | 6d ago |
| lm2904th-13.lbr | 6d ago |
| lm2904th-13.step | 6d ago |
| package.json | 6d ago |
| page.json | 6d ago |
| README.md | 6d ago |
LM2904TH-13
Diodes Incorporated · Operational Amplifier · TSSOP-8
LM2904TH-13 from Diodes Incorporated, in a TSSOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | 1OUT | output | Channel 1 output; the output swings from 0 to VCC-1.5V (large output voltage swing). |
| 2 | 1IN- | input | Channel 1 inverting input; either input may go to +36V without damage, and the input common-mode range includes ground. |
| 3 | 1IN+ | input | Channel 1 non-inverting input; common-mode range is 0 to VCC-1.5V and must not go more than 0.3V below ground (at +25°C). |
| 4 | GND | power_in | Ground pin, the common (0V) reference for the device. |
| 5 | 2IN+ | input | Channel 2 non-inverting input; common-mode range is 0 to VCC-1.5V and must not go more than 0.3V below ground (at +25°C). |
| 6 | 2IN- | input | Channel 2 inverting input; either input may go to +36V without damage, and the input common-mode range includes ground. |
| 7 | 2OUT | output | Channel 2 output; the output swings from 0 to VCC-1.5V (large output voltage swing). |
| 8 | VCC | power_in | Chip supply voltage; single supply 3V to 36V or dual supplies ±1.5V to ±18V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Diodes Incorporated |
| Package | TSSOP-8 |
| Category | Amplifiers/Comparators |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input Offset Voltage (Non-A device) | VIO | 2 | 7 | mV | VIC = VCMR Min, VO = 1.4V, VCC = 5V to Max, RS = 0Ω, TA = +25°C | 5 | |
| Input Offset Voltage (Non-A device) | VIO | 10 | mV | VIC = VCMR Min, VO = 1.4V, VCC = 5V to Max, RS = 0Ω, Full Range | 5 | ||
| Input Bias Current | IB | -20 | -250 | nA | IIN+ or IIN− with OUT in Linear Range, VCMR = 0V, TA = +25°C | 5 | |
| Input Bias Current | IB | -500 | nA | IIN+ or IIN− with OUT in Linear Range, VCMR = 0V, Full Range | 5 | ||
| Input Offset Current | IIO | 2 | 50 | nA | IIN+ - IIN−, VCM = 0V, TA = +25°C | 5 | |
| Input Offset Current | IIO | 150 | nA | IIN+ - IIN−, VCM = 0V, Full Range | 5 | ||
| Supply Current (Two Amplifiers) | ICC | 0.7 | 2 | mA | VO = 0.5VCC, No Load, VCC = 30V, Full Range | 5 | |
| Supply Current (Two Amplifiers) | ICC | 0.5 | 1.2 | mA | VO = 0.5VCC, No Load, VCC = 5V, Full Range | 5 | |
| Voltage Gain | AV | 25 | 100 | V/mV | VCC = 15V, VOUT = 1V to 11V, RL ≥ 2kΩ, TA = +25°C | 5 | |
| Voltage Gain | AV | 15 | V/mV | VCC = 15V, VOUT = 1V to 11V, RL ≥ 2kΩ, Full Range | 5 | ||
| Common Mode Rejection Ratio | CMRR | 60 | 70 | dB | DC, VCMR = 0V to VCC-1.5V, TA = +25°C | 5 | |
| Power Supply Rejection Ratio | PSRR | 70 | 100 | dB | VCC = 5V to 30V, TA = +25°C | 5 | |
| Output Current Sink | ISINK | 12 | 50 | µA | VIN- = 1V, VIN+ = 0V, VCC = 15V, VO = 200mV, TA = +25°C | 5 | |
| Output Current Sink | ISINK | 10 | 20 | mA | VIN- = 1V, VIN+ = 0V, VCC = 15V, VO = 15V, TA = +25°C | 5 | |
| Output Current Sink | ISINK | 5 | mA | VIN- = 1V, VIN+ = 0V, VCC = 15V, VO = 15V, Full Range | 5 | ||
| Output Current Source | ISOURCE | -20 | -40 | -60 | VIN+ = 1V, VIN- = 0V, VCC = 15V, VO = 0V, TA = +25°C | 5 | |
| Output Current Source | ISOURCE | -10 | VIN+ = 1V, VIN- = 0V, VCC = 15V, VO = 0V, Full Range | 5 | |||
| Short-Circuit to Ground | ISC | -60 | 40 | 60 | mA | VCC = 5V, GND = -5V, VO = 0V, TA = +25°C; printed as ±40 typ, ±60 max | 5 |
| High-Level Output Voltage Swing | VOH | 26 | V | VCC = 30V, RL = 2kΩ, Full Range | 5 | ||
| High-Level Output Voltage Swing | VOH | 27 | 28 | V | VCC = 30V, RL ≥ 10kΩ | 5 | |
| Low-Level Output Voltage Swing | VOL | 5 | 20 | mV | RL ≦ 10kΩ, Full Range | 5 | |
| Supply Voltage (absolute maximum) | VCC | 36 | V | Printed as ±18 or 36 V | 3 | ||
| Differential Input Voltage | VID | 36 | V | 3 | |||
| Input Voltage | VIN | -0.3 | 36 | V | 3 | ||
| Operating Temperature Range | TA | -40 | 125 | °C | 3 | ||
| Operating Junction Temperature | TJ | 150 | °C | 3 | |||
| Storage Temperature Range | TST | -65 | 150 | °C | 3 | ||
| Single Supply Voltage (operating range) | VCC | 3 | 36 | V | Single supply, from Features list | 1 | |
| Human Body Model ESD Protection | ESD | 300 | V | Human body model, 1.5kΩ in series with 100pF (Note 8) | 3 | ||
| Machine Model ESD Protection | ESD | 150 | V | Machine model | 3 | ||
| Package Thermal Impedance, junction-to-ambient (TSSOP-8) | θJA | 209 | °C/W | TSSOP-8, Note 5 | 3 | ||
| Package Thermal Impedance, junction-to-case (TSSOP-8) | θJC | 47 | °C/W | TSSOP-8, Note 6 | 3 |
Materials and finish
As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| contacts | tin | Terminals: Finish - Mate Tin Plated Leads, Solderable per MIL-STD-202, Method 208 Weight: | 15 |
CAD (KiCad official)
- Symbol:
LM2904TH-13 - Footprint:
Package_SO:TSSOP-8_3x3mm_P0.65mm - 3D model: TSSOP-8 (KiCad packages3D, STEP)
- 3D model files:
lm2904th-13-etched.step/lm2904th-13-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);lm2904th-13.step/lm2904th-13.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Diodes Incorporated datasheet (16 pp, sha256
ca983890873d55d8, retrieved 2026-10-18, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).