main
History Download
Ray lm2904qs-13: specified limits as data (metadata.characteristics, 34 rows from the datasheet) ed34b3a 19d ago

LM2904QS-13

Diodes Incorporated · Operational Amplifier · SO-8

LM2904QS-13 from Diodes Incorporated, in a SO-8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 1OUT output Channel 1 output. Op-amp output stage capable of sourcing/sinking up to ~40mA (typ short-circuit), swinging from ~0V to VCC-1.5V.
2 1IN- input Channel 1 inverting input. High-impedance input with typical input bias current of -20nA (PNP input stage sources current out of the pin).
3 1IN+ input Channel 1 non-inverting input. Input common-mode voltage range includes ground (0V to VCC-1.5V); tolerates up to +36V without damage.
4 GND power_in Ground / negative supply. In single-supply operation this is 0V; in dual-supply operation this connects to the negative rail (down to -18V relative to VCC).
5 2IN+ input Channel 2 non-inverting input. Input common-mode voltage range includes ground (0V to VCC-1.5V); tolerates up to +36V without damage.
6 2IN- input Channel 2 inverting input. High-impedance input with typical input bias current of -20nA (PNP input stage sources current out of the pin).
7 2OUT output Channel 2 output. Op-amp output stage capable of sourcing/sinking up to ~40mA (typ short-circuit), swinging from ~0V to VCC-1.5V.
8 VCC power_in Chip positive supply voltage. Single supply 3V to 36V, or positive rail of dual supply ±1.5V to ±18V. Bypass with 0.1µF ceramic close to pin.

Key specifications

Parameter Value
Manufacturer Diodes Incorporated
Package SO-8
Category Op-amp/Cmp
Pins 8

Ordering variants

  • LM2904QS-13
  • LM2904QS-13LM2904AQS-13
  • LM2904QS-13LM2904QTH-13
  • LM2904QS-13LM2904AQTH-13
  • LM2904QS-13LM2904QM8-13
  • LM2904QS-13LM2904AQM8-13
  • LM2904QS-13LM2902QS14-13
  • LM2904QS-13LM2902AQS14-13
  • LM2904QS-13LM2902QT14-13
  • LM2904QS-13LM2902AQT14-13

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Input Offset Voltage (Non-A device) VIO 2 7 mV TA=+25°C; VIC=VCMR Minimum; VO=1.4V; VCC=5V to Maximum; RS=0Ω 6
Input Offset Voltage (Non-A device) VIO 10 mV Full Range; VIC=VCMR Minimum; VO=1.4V; VCC=5V to Maximum; RS=0Ω 6
Input Bias Current IB -20 -250 nA IIN+ or IIN− with OUT in linear range; VCMR=0V; TA=+25°C 6
Input Bias Current IB -500 nA IIN+ or IIN− with OUT in linear range; VCMR=0V; Full Range 6
Input Offset Current IIO 2 50 nA IIN+ - IIN−, VCM=0V; TA=+25°C 6
Input Offset Current IIO 150 nA IIN+ - IIN−, VCM=0V; Full Range 6
Input Common-Mode Voltage Range (lower limit) VCMR 0 V VCC=30V; TA=+25°C; printed upper limit VCC -1.5 V (expression, not numeric) 6
Supply Current (Two Amplifiers) ICC 0.7 2 mA VO=0.5 VCC, No Load, VCC=30V; Full Range 6
Supply Current (Two Amplifiers) ICC 0.5 1.2 mA VO=0.5 VCC, No Load, VCC=5V; Full Range 6
Voltage Gain AV 25 100 V/mV VCC=15V, VOUT=1V to 11V, RL≥2kΩ; TA=+25°C 6
Voltage Gain AV 15 V/mV VCC=15V, VOUT=1V to 11V, RL≥2kΩ; Full Range 6
Common Mode Rejection Ratio CMRR 60 70 dB DC, VCMR=0V to VCC-1.5V; TA=+25°C 6
Power Supply Rejection Ratio PSRR 70 100 dB VCC=5V to 30V; TA=+25°C 6
Output Current Sink (small output) ISINK 12 50 µA VIN-=1V, VIN+=0V, VCC=15V, VO=200mV; TA=+25°C 6
Output Current Sink ISINK 10 20 mA VIN-=1V, VIN+=0V, VCC=15V, VO=15V; TA=+25°C 6
Output Current Sink ISINK 5 mA VIN-=1V, VIN+=0V, VCC=15V, VO=15V; Full Range 6
Output Current Source ISOURCE -20 -40 -60 VIN+=1V, VIN-=0V, VCC=15V, VO=0V; TA=+25°C 6
Output Current Source ISOURCE -10 VIN+=1V, VIN-=0V, VCC=15V, VO=0V; Full Range 6
Short-Circuit to Ground ISC -60 40 60 mA VCC=5V, GND=-5V, VO=0V; TA=+25°C 6
High-Level Output Voltage Swing VOH 26 V VCC=30V, RL=2kΩ; Full Range 6
High-Level Output Voltage Swing VOH 27 28 V VCC=30V, RL≥10kΩ 6
Low-Level Output Voltage Swing VOL 5 20 mV RL≤10kΩ; Full Range 6
Supply Voltage (single supply, dual ±18 or 36) VCC 36 V Printed as ±18 or 36 V; 36 V single-supply value 4
Differential Input Voltage VID 36 V 4
Input Voltage VIN -0.3 36 V 4
Operating Temperature Range TA -40 125 °C 4
Operating Junction Temperature TJ 150 °C 4
Storage Temperature Range TSTG -65 150 °C 4
ESD Human Body Model (SO-8) 500 V Human body model, 1.5kΩ in series with 100pF; SO-8 package 4
Single Supply Voltage VCC 2 36 V Single supply 4
Dual Supply Voltage VCC 1 18 V Dual supply; printed ±1 and ±18 V 4
Ambient Temperature Range TA -40 125 °C Over operating free-air temperature range 4
Junction Temperature Range TJ -40 125 °C 4
Package Thermal Impedance, SO-8 (θJA) θJA 150 °C/W SO-8 package 4

CAD (KiCad official)

  • Symbol: LM2904QS-13
  • Footprint: Package_SO:SOIC-8_3.9x4.9mm_P1.27mm
  • 3D model: SO-8 (KiCad packages3D, STEP)
  • 3D model files: lm2904qs-13-etched.step / lm2904qs-13-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); lm2904qs-13.step / lm2904qs-13.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Diodes Incorporated datasheet (None pp, sha256 12a3965c03721356, retrieved 2026-08-17, tier: lcsc)
  • Extractor: ds2sf (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF