Generated by kicad-footprint-generator · KiCad file format 20260206
LM2904DR-JSM
JSMSEMI · Operational Amplifier · SOP-8
LM2904DR-JSM from JSMSEMI, in a SOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | OUTPUT1 | output | Output of amplifier channel 1, which the datasheet rates for continuous short to ground. |
| 2 | INPUT1(-) | input | Inverting input of amplifier channel 1; the input common-mode voltage range is 0 V to VCC-1.5 V. |
| 3 | INPUT1(+) | input | Non-inverting input of amplifier channel 1; the input common-mode voltage range is 0 V to VCC-1.5 V and includes ground. |
| 4 | VEE / GND | power_in | Negative supply (VEE) or ground; the part runs from a single supply or split supplies over a 3 V to 32 V range. |
| 5 | INPUT2(+) | input | Non-inverting input of amplifier channel 2; the input common-mode voltage range is 0 V to VCC-1.5 V and includes ground. |
| 6 | INPUT2(-) | input | Inverting input of amplifier channel 2; the input common-mode voltage range is 0 V to VCC-1.5 V. |
| 7 | OUTPUT2 | output | Output of amplifier channel 2, which the datasheet rates for continuous short to ground. |
| 8 | VCC | power_in | Positive supply; the datasheet gives a supply range of 3 V to 32 V and an absolute maximum of ±16 or 32 V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | JSMSEMI |
| Package | SOP-8 |
| Category | Amplifiers/Comparators |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply Voltage | Vcc | 32 | V | printed as '+-16 or 32' V; ±16 V variant not separated | 1 | ||
| Differential Input Voltage | VI(DIFF) | 32 | V | 1 | |||
| Input Voltage | VI | -0.3 | 32 | V | 1 | ||
| Operating Temperature Range | TOPR | 0 | 70 | °C | 1 | ||
| Storage Temperature Range | TSTG | -65 | 150 | °C | 1 | ||
| Input Offset Voltage | VIO | 2.9 | 7 | mV | VCM=0V to VCC-1.5V, VO(P)=1.4V, RS=0Ω | 2 | |
| Input Offset Current | IIO | 5 | 50 | nA | 2 | ||
| Input Bias Current | IBIAS | 45 | 250 | nA | 2 | ||
| Input Common Mode Voltage | VI(R) | 0 | V | VCC=30V; upper limit printed as VCC-1.5 V (not numeric) | 2 | ||
| Power Supply Current | ICC | 0.8 | 2 | mA | RL=∝,VCC=30V | 2 | |
| Power Supply Current (full temperature range) | ICC | 0.5 | 1.2 | mA | RL=∝,Full Temperature Range | 2 | |
| Large Signal Voltage Gain | GV | 25 | 100 | V/mV | VCC=15V,RL>=2KΩ, VO(P)=1V to 11V | 2 | |
| Output Voltage Swing High | VO(H) | 26 | V | VCC=30V,RL=2KΩ | 2 | ||
| Output Voltage Swing High | VO(H) | 27 | 28 | V | VCC=30V,RL=10KΩ | 2 | |
| Output Voltage Swing Low | VO(L) | 5 | 20 | mV | VCC=5V,RL>=10KΩ | 2 | |
| Common Mode Rejection Ratio | CMRR | 65 | 80 | dB | 2 | ||
| Power Supply Rejection Ratio | PSRR | 65 | 100 | dB | 2 | ||
| Channel Separation | CS | 120 | dB | f=1KHZ to 20KHZ | 2 | ||
| Short Circuit Current to Ground | ISC | 40 | 60 | mA | 2 | ||
| Output Source Current | ISOURCE | 20 | 30 | mA | VI(+)=1V,VI(-)=0V VCC=15V,VO(P)=2V | 2 | |
| Output Sink Current | ISINK | 10 | 15 | mA | VI(+)=0V,VI(-)=1V VCC=15V,VO(P)=2V | 2 | |
| Output Sink Current (VO(P)=200mV) | ISINK | 12 | 100 | mA | VI(+)=0V,VI(-)=1V VCC=15V,VO(P)=200mV | 2 |
CAD (KiCad official)
- Symbol:
LM2904DR-JSM - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOP-8 (KiCad packages3D, STEP)
- 3D model files:
lm2904dr-jsm-etched.step/lm2904dr-jsm-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);lm2904dr-jsm.step/lm2904dr-jsm.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: JSMSEMI datasheet (5 pp, sha256
440569014f3114a6, retrieved 2026-11-11, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).