Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

LM2904BAQDRQ1

Texas Instruments · Operational Amplifier · SOIC-8

LM2904BAQDRQ1 from Texas Instruments, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 OUT1 output Output of the first operational amplifier.
2 IN1- input Negative (inverting) input of the first operational amplifier.
3 IN1+ input Positive (non-inverting) input of the first operational amplifier.
4 V- power_in Negative (lowest) power supply or ground for single supply operation.
5 IN2+ input Positive (non-inverting) input of the second operational amplifier.
6 IN2- input Negative (inverting) input of the second operational amplifier.
7 OUT2 output Output of the second operational amplifier.
8 V+ power_in Positive (highest) power supply.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package SOIC-8
Category Amplifiers/Comparators
Pins 8

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Input offset voltage, TA=25°C VOS -2 2 mV 8
Input offset voltage, TA=-40°C to +125°C VOS -3 3 mV TA=-40°C 至 +125°C 8
Input offset voltage drift dVOS/dT 3.5 12 µV/°C TA = –40°C 至 +125°C(1) 8
Power supply rejection ratio PSRR 2 15 µV/V 8
Common-mode rejection ratio, VS=3 V to 36 V CMRR 20 100 µV/V (V–) ≤ VCM ≤ (V+) – 1.5V,VS=3 V 至 36 V 8
Common-mode rejection ratio, VS=5 V to 36 V, TA=-40°C to +125°C CMRR 25 316 µV/V (V–) ≤ VCM ≤ (V+) – 2.0V,VS=5 V 至 36 V,TA = –40°C 至 +125°C 8
Input bias current, TA=25°C IB -35 10 35 nA 8
Input bias current, TA=-40°C to +125°C IB -50 50 nA TA = –40°C 至 +125°C(1) 8
Input offset current, TA=25°C IOS 0.5 4 nA 8
Input offset current, TA=-40°C to +125°C IOS 5 nA TA=-40°C 至 +125°C(1) 8
Open-loop voltage gain, TA=25°C AOL 70 140 V/mV VS = 15V;VO = 1V 至 11V;RL ≥ 10kΩ,连接至 (V-) 8
Open-loop voltage gain, TA=-40°C to +125°C AOL 35 V/mV TA = –40°C 至 +125°C 8
Positive output swing from V+ rail VO 1.35 1.42 V IOUT = 50µA 8
Positive output swing from V+ rail VO 1.4 1.48 V 输出电流= 1 mA 8
Positive output swing from V+ rail VO 1.5 1.61 V IOUT = 5mA(1) 8
Negative output swing from V- rail VO 100 150 mV IOUT = 50µA 8
Negative output swing from V- rail VO 0.75 1 V 输出电流= 1 mA 8
Negative output swing from V- rail VO 5 20 mV VS = 5V,RL ≤ 10kΩ 连接到 (V–),TA = –40°C 至 +125°C 8
Output source current IO -20 -30 mA VS = 15V;VO = V–;VID = 1V 拉电流 8
Output source current, TA=-40°C to +125°C IO -10 mA TA = –40°C 至 +125°C 8
Output sink current IO 10 20 mA VS = 15V;VO = V+;VID = 1V 灌电流 8
Output sink current, TA=-40°C to +125°C IO 5 mA TA = –40°C 至 +125°C 8
Output sink current at VO near V- IO 60 100 µA VID = -1V;VO = (V-) + 200mV 8
Short-circuit current ISC -40 60 mA VS = 20V,(V+) = 10V,(V-) = -10V,VO = 0V 8
Quiescent current per amplifier, VS=5 V IQ 300 460 µA VS = 5V,IO = 0A,TA = –40°C 至 +125°C 9
Quiescent current per amplifier, VS=36 V IQ 800 µA VS = 36V,IO = 0A 9
Supply voltage VS 3 36 V LM2904B-Q1、LM2904BA-Q1 7
Operating ambient temperature TA -40 125 °C 7
Junction-to-ambient thermal resistance, D (SOIC) 8-pin RθJA 124.7 °C/W D (SOIC), 8 引脚 7
Junction-to-case (top) thermal resistance, D (SOIC) 8-pin RθJC(top) 66.9 °C/W D (SOIC), 8 引脚 7
Junction-to-board thermal resistance, D (SOIC) 8-pin RθJB 67.9 °C/W D (SOIC), 8 引脚 7
Junction-to-top characterization parameter, D (SOIC) 8-pin ψJT 19.2 °C/W D (SOIC), 8 引脚 7
Junction-to-board characterization parameter, D (SOIC) 8-pin ψJB 67.2 °C/W D (SOIC), 8 引脚 7

CAD (KiCad official)

  • Symbol: LM2904BAQDRQ1
  • Footprint: Package_SO:SOIC-8_3.9x4.9mm_P1.27mm
  • 3D model: SOIC-8 (KiCad packages3D, STEP)
  • 3D model files: lm2904baqdrq1-etched.step / lm2904baqdrq1-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); lm2904baqdrq1.step / lm2904baqdrq1.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (44 pp, sha256 58d8285f590f5a5e, retrieved 2026-09-22, tier: lcsc)
  • Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
  • Extractor: parts-factory 2.0.0 / extract_pins 0.2, primary claude-haiku-4-5-20251001 (text), consensus claude-sonnet-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF