Made with KiCad 10.0 · needs KiCad 10.0 or later to open · KiCad file format 20260206
LM2904AYPT
STMicroelectronics · Operational Amplifier · TSSOP-8
LM2904AYPT from STMicroelectronics, in a TSSOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | Out1 | output | Output of op amp 1; swings 0 V to (VCC+ - 1.5 V) and maximum output short-circuit current is approximately 40 mA. |
| 2 | In1- | input | Inverting input of op amp 1; input common-mode range VCC- to VCC+ - 1.5 V at 25 °C, with input voltage -0.3 V to 32 V. |
| 3 | In1+ | input | Non-inverting input of op amp 1; input common-mode range VCC- to VCC+ - 1.5 V at 25 °C, with input voltage -0.3 V to 32 V. |
| 4 | Vcc- | power_in | Negative supply voltage, or ground in single-supply operation. |
| 5 | In2+ | input | Non-inverting input of op amp 2; input common-mode range VCC- to VCC+ - 1.5 V at 25 °C, with input voltage -0.3 V to 32 V. |
| 6 | In2- | input | Inverting input of op amp 2; input common-mode range VCC- to VCC+ - 1.5 V at 25 °C, with input voltage -0.3 V to 32 V. |
| 7 | Out2 | output | Output of op amp 2; swings 0 V to (VCC+ - 1.5 V) and maximum output short-circuit current is approximately 40 mA. |
| 8 | Vcc+ | power_in | Positive supply voltage, operating range 3 V to 30 V (absolute maximum 32 V). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | STMicroelectronics |
| Package | TSSOP-8 |
| Category | Amplifiers/Comparators |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input offset voltage, LM2904A | Vio | 1 | 2 | mV | Tamb = 25 °C | 6 | |
| Input offset voltage, LM2904A | Vio | 4 | mV | Tmin ≤ Tamb ≤ Tmax | 6 | ||
| Input offset voltage drift | ΔVio/ΔT | 7 | 30 | µV/°C | 6 | ||
| Input offset current | Iio | 2 | 30 | nA | Tamb = 25 °C | 6 | |
| Input offset current | Iio | 40 | nA | Tmin ≤ Tamb ≤ Tmax | 6 | ||
| Input offset current drift | ΔIio/ΔT | 10 | 300 | pA/°C | 6 | ||
| Input bias current | Iib | 20 | 150 | nA | Tamb = 25 °C | 6 | |
| Input bias current | Iib | 200 | nA | Tmin ≤ Tamb ≤ Tmax | 6 | ||
| Large signal voltage gain | Avd | 50 | 100 | V/mV | VCC+ = 15 V, RL = 2 kΩ, Vo = 1.4 V to 11.4 V, Tamb = 25 °C | 6 | |
| Large signal voltage gain | Avd | 25 | V/mV | VCC+ = 15 V, RL = 2 kΩ, Vo = 1.4 V to 11.4 V, Tmin ≤ Tamb ≤ Tmax | 6 | ||
| Supply voltage rejection ratio | SVR | 65 | 100 | dB | VCC+ = 5 V to 30 V, Vicm = 0 V, Tamb = 25 °C | 6 | |
| Supply voltage rejection ratio | SVR | 65 | dB | VCC+ = 5 V to 30 V, Vicm = 0 V, Tmin ≤ Tamb ≤ Tmax | 6 | ||
| Supply current, all amp | ICC | 0.7 | 1.2 | mA | no load, Tamb = 25 °C, VCC+ = 5 V | 6 | |
| Supply current, all amp | ICC | 2 | mA | no load, Tmin ≤ Tamb ≤ Tmax, VCC+ = 30 V | 6 | ||
| Common-mode rejection ratio | CMR | 70 | 85 | dB | VCC+ = 30 V, Vicm = 0 V to 28.5 V, Tamb = 25 °C | 6 | |
| Common-mode rejection ratio | CMR | 60 | dB | VCC+ = 30 V, Vicm = 0 V to 28 V, Tmin ≤ Tamb ≤ Tmax | 6 | ||
| Output short-circuit current (source) | Isource | 20 | 40 | 60 | mA | VCC+ = 15 V, Vo = 2 V, Vid = 1 V | 6 |
| Output sink current | Isink | 10 | 20 | mA | VO = 2 V, VCC+ = 15 V | 6 | |
| Output sink current | Isink | 12 | 50 | µA | VO = 0.2 V, VCC+ = 15 V | 6 | |
| High-level output voltage | VOH | 26 | V | VCC+ = 30 V, Tamb = 25 °C, RL = 2 kΩ | 6 | ||
| High-level output voltage | VOH | 27 | V | VCC+ = 30 V, Tamb = 25 °C, RL = 10 kΩ | 6 | ||
| Low-level output voltage | VOL | 5 | 20 | mV | RL = 10 kΩ, Tamb = 25 °C | 6 | |
| Low-level output voltage | VOL | 20 | mV | RL = 10 kΩ, Tmin ≤ Tamb ≤ Tmax | 6 | ||
| Slew rate | SR | 0.3 | 0.6 | V/µs | VCC+ = 15 V, Vin = 0.5 to 3 V, RL = 2 kΩ, CL = 100 pF, unity gain, Tamb = 25 °C | 7 | |
| Slew rate | SR | 0.2 | V/µs | VCC+ = 15 V, Vin = 0.5 to 3 V, RL = 2 kΩ, CL = 100 pF, unity gain, Tmin ≤ Tamb ≤ Tmax | 7 | ||
| Gain bandwidth product | GBP | 0.7 | 1.1 | MHz | f = 100 kHz, VCC+ = 30 V, Vin = 10 mV, RL = 2 kΩ, CL = 100 pF | 7 | |
| Supply voltage | VCC | 3 | 30 | V | 5 | ||
| Operating free-air temperature range | Toper | -40 | 125 | °C | 5 | ||
| Supply voltage | VCC | 32 | V | Printed as ±16 or 32 V | 4 | ||
| Differential input voltage (LM2904A) | Vid | -32 | 32 | V | Non-inverting input with respect to inverting input | 4 | |
| Input voltage (LM2904A) | Vin | -0.3 | 32 | V | 4 | ||
| Input current, Vin driven negative | Iin | 5 | mA | DC | 4 | ||
| Input current, Vin driven negative | Iin | 50 | mA | AC, duty cycle = 10 %, T = 1 s | 4 | ||
| Input current, Vin driven positive above AMR | Iin | 0.4 | mA | 4 | |||
| Operating free-air temperature range | Toper | -40 | 125 | °C | 4 | ||
| Storage temperature range | Tstg | -65 | 150 | °C | 4 | ||
| Maximum junction temperature | Tj | 150 | °C | 4 | |||
| Thermal resistance junction to ambient, TSSOP8 | Rthja | 120 | °C/W | Values are typical | 4 | ||
| Thermal resistance junction to case, TSSOP8 | Rthjc | 37 | °C/W | Values are typical | 4 | ||
| ESD HBM (LM2904A) | HBM | 300 | V | Human body model, 100 pF through 1.5 kΩ | 4 | ||
| ESD MM | MM | 200 | V | Machine model, 200 pF | 4 | ||
| ESD CDM | CDM | 1.5 | kV | Charged device model | 4 |
CAD (KiCad official)
- Symbol:
LM2904AYPT - Footprint:
Package_SO:TSSOP-8_3x3mm_P0.65mm - 3D model: TSSOP-8 (KiCad packages3D, STEP)
- 3D model files:
lm2904aypt-etched.step/lm2904aypt-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);lm2904aypt.step/lm2904aypt.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: STMicroelectronics datasheet (26 pp, sha256
5d1d694051521c3a, retrieved 2026-10-03, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-4-5-20251001(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).