main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs lm2904avqdrq1: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
viewers lm2904avqdrq1: viewers · Ray
lm2904avqdrq1-etched.fit.json lm2904avqdrq1: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
lm2904avqdrq1-etched.glb lm2904avqdrq1: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
lm2904avqdrq1-etched.step lm2904avqdrq1: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
lm2904avqdrq1.glb Publish 0.1.0 · Ray
lm2904avqdrq1.kicad_mod Publish 0.1.0 · Ray
lm2904avqdrq1.kicad_sym Publish 0.1.0 · Ray
lm2904avqdrq1.lbr lm2904avqdrq1: factory component page (tier=mfr) · Ray
lm2904avqdrq1.step Publish 0.1.0 · Ray
package.json Publish 0.1.0 · Ray
page.json lm2904avqdrq1: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding) · Ray
README.md lm2904avqdrq1: laser-etched CAD + chip hero (factory 2.0.0 backfill) · Ray

LM2904AVQDRQ1

Texas Instruments · Operational Amplifier · SOIC-8

LM2904AVQDRQ1 from Texas Instruments, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 1OUT output Output of amplifier 1. Class-B push-pull output driven by an internal ~50 µA sink current regulator; can sink/source loads referenced to GND with V_OL ≈ 5 mV at R_L ≥ 10 kΩ.
2 1IN- input Inverting input of amplifier 1. Differential input voltage rating ±32 V (V-suffix); typical input bias current -20 nA, input offset current 2 nA typ.
3 1IN+ input Non-inverting input of amplifier 1. Common-mode input voltage range includes ground (0 V to V_CC-1.5 V), enabling direct sensing near GND on single-supply rails.
4 GND power_in Negative supply / ground reference (V_CC-). Tie to system ground for single-supply operation, or to the negative rail for split-supply operation (V_CC - GND up to 32 V for V-suffix parts).
5 2IN+ input Non-inverting input of amplifier 2. Common-mode input voltage range includes ground (0 V to V_CC-1.5 V).
6 2IN- input Inverting input of amplifier 2. Differential input voltage rating ±32 V (V-suffix); input bias current -20 nA typ.
7 2OUT output Output of amplifier 2. Same class-B output stage as 1OUT; short-circuit output current ±40 mA typ at V_CC = 5 V.
8 VCC power_in Positive supply rail. 3 V to 32 V for V-suffix devices (3 V to 26 V for non-V), shared by both amplifiers; total quiescent current 0.7 mA typ, 1.2 mA max.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package SOIC-8
Category Op-amp/Cmp
Pins 8

Ordering variants

Same part, different packaging or reel option.

  • LM2904AVQDRQ1
  • LM2904QDRQ1
  • LM2904VQDRQ1
  • LM2904AVQPWRQ1
  • LM2904QPWRQ1
  • LM2904VQPWRQ1

CAD (KiCad official)

  • Symbol: LM2904AVQDRQ1
  • Footprint: Package_SO:SOIC-8_3.9x4.9mm_P1.27mm
  • 3D model: SOIC-8 (KiCad packages3D, STEP)
  • 3D model files: lm2904avqdrq1-etched.step / lm2904avqdrq1-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); lm2904avqdrq1.step / lm2904avqdrq1.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (15 pp, sha256 165c99671d1a521f, retrieved 2026-08-17, tier: manufacturer)
  • Extractor: ds2sf (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF