← Commit history
lm2904avqdrq1: factory component page (tier=mfr)
3 files changed
+27−24
README.md+9−9@@ -8,14 +8,14 @@ LM2904AVQDRQ1 from Texas Instruments, in a SOIC-8. Pinout and pin descriptions e | Pin | Name | Type | Function | |---|---|---|---|-| 1 | 1OUT | output | Output of amplifier 1. Push-pull output stage; short-circuit protected to GND for VCC <= 15 V. Short-circuit output current typically +/-40 mA (VCC=5V). |-| 2 | 1IN- | input | Inverting input of amplifier 1. High-impedance input; input bias current typically -20 nA. Common-mode input voltage range includes ground (0 V to VCC-1.5 V typ). |-| 3 | 1IN+ | input | Non-inverting input of amplifier 1. High-impedance input; input bias current typically -20 nA. Common-mode input voltage range includes ground. |-| 4 | GND | power_in | Ground (or VCC-) for both amplifiers. In single-supply operation this pin connects to system ground; in split-supply operation this pin is the negative supply rail. |-| 5 | 2IN+ | input | Non-inverting input of amplifier 2. High-impedance input; input bias current typically -20 nA. Common-mode input voltage range includes ground. |-| 6 | 2IN- | input | Inverting input of amplifier 2. High-impedance input; input bias current typically -20 nA. Common-mode input voltage range includes ground (0 V to VCC-1.5 V typ). |-| 7 | 2OUT | output | Output of amplifier 2. Push-pull output stage; short-circuit protected to GND for VCC <= 15 V. |-| 8 | VCC | power_in | Positive supply voltage. Operating range 3 V to 32 V for V-suffix devices (LM2904AVQDRQ1). Recommended to bypass with a local decoupling capacitor. Supply current typically 0.7 mA for both amplifiers. |+| 1 | 1OUT | output | Output of amplifier 1. Class-B push-pull output driven by an internal ~50 µA sink current regulator; can sink/source loads referenced to GND with V_OL ≈ 5 mV at R_L ≥ 10 kΩ. |+| 2 | 1IN- | input | Inverting input of amplifier 1. Differential input voltage rating ±32 V (V-suffix); typical input bias current -20 nA, input offset current 2 nA typ. |+| 3 | 1IN+ | input | Non-inverting input of amplifier 1. Common-mode input voltage range includes ground (0 V to V_CC-1.5 V), enabling direct sensing near GND on single-supply rails. |+| 4 | GND | power_in | Negative supply / ground reference (V_CC-). Tie to system ground for single-supply operation, or to the negative rail for split-supply operation (V_CC - GND up to 32 V for V-suffix parts). |+| 5 | 2IN+ | input | Non-inverting input of amplifier 2. Common-mode input voltage range includes ground (0 V to V_CC-1.5 V). |+| 6 | 2IN- | input | Inverting input of amplifier 2. Differential input voltage rating ±32 V (V-suffix); input bias current -20 nA typ. |+| 7 | 2OUT | output | Output of amplifier 2. Same class-B output stage as 1OUT; short-circuit output current ±40 mA typ at V_CC = 5 V. |+| 8 | VCC | power_in | Positive supply rail. 3 V to 32 V for V-suffix devices (3 V to 26 V for non-V), shared by both amplifiers; total quiescent current 0.7 mA typ, 1.2 mA max. | ## Key specifications @@ -29,9 +29,9 @@ LM2904AVQDRQ1 from Texas Instruments, in a SOIC-8. Pinout and pin descriptions e ## Ordering variants - `LM2904AVQDRQ1`-- `LM2904AVQDRQ1LM2904AVQPWRQ1` - `LM2904AVQDRQ1LM2904QDRQ1` - `LM2904AVQDRQ1LM2904VQDRQ1`+- `LM2904AVQDRQ1LM2904AVQPWRQ1` - `LM2904AVQDRQ1LM2904QPWRQ1` - `LM2904AVQDRQ1LM2904VQPWRQ1`
lm2904avqdrq1.lbr+9−3@@ -50,7 +50,7 @@ <layer number="98" name="Guide" color="6" fill="1" visible="yes" active="yes"/> </layers> <library>-<description></description>+<description>Texas Instruments Operational Amplifier, SOIC-8</description> <packages> <package name="SOIC-8_3.9x4.9mm_P1.27mm"> <description>SOIC-8, 3.9 x 4.9 mm, 1.27 mm pitch</description>@@ -86,6 +86,7 @@ </packages> <symbols> <symbol name="LM2904AVQDRQ1">+ <description>Texas Instruments Operational Amplifier, SOIC-8</description> <wire x1="-12.7" y1="5.08" x2="12.7" y2="5.08" width="0.254" layer="94"/> <wire x1="12.7" y1="5.08" x2="12.7" y2="-7.62" width="0.254" layer="94"/> <wire x1="12.7" y1="-7.62" x2="-12.7" y2="-7.62" width="0.254" layer="94"/>@@ -104,7 +105,7 @@ </symbols> <devicesets> <deviceset name="LM2904AVQDRQ1" prefix="U">- <description></description>+ <description>Texas Instruments Operational Amplifier, SOIC-8</description> <gates> <gate name="G$1" symbol="LM2904AVQDRQ1" x="0" y="0"/> </gates>@@ -120,7 +121,12 @@ <connect gate="G$1" pin="2IN-" pad="6"/> <connect gate="G$1" pin="2IN+" pad="5"/> </connects>- <technologies><technology name=""/></technologies>+ <technologies>+ <technology name="">+ <attribute name="MPN" value="LM2904AVQDRQ1" constant="no"/>+ <attribute name="MANUFACTURER" value="Texas Instruments" constant="no"/>+ </technology>+ </technologies> </device> </devices> </deviceset>
page.json+9−12@@ -32,49 +32,49 @@ "number": "1", "name": "1OUT", "type": "output",- "description": "Output of amplifier 1. Push-pull output stage; short-circuit protected to GND for VCC <= 15 V. Short-circuit output current typically +/-40 mA (VCC=5V)."+ "description": "Output of amplifier 1. Class-B push-pull output driven by an internal ~50 \u00b5A sink current regulator; can sink/source loads referenced to GND with V_OL \u2248 5 mV at R_L \u2265 10 k\u03a9." }, { "number": "2", "name": "1IN-", "type": "input",- "description": "Inverting input of amplifier 1. High-impedance input; input bias current typically -20 nA. Common-mode input voltage range includes ground (0 V to VCC-1.5 V typ)."+ "description": "Inverting input of amplifier 1. Differential input voltage rating \u00b132 V (V-suffix); typical input bias current -20 nA, input offset current 2 nA typ." }, { "number": "3", "name": "1IN+", "type": "input",- "description": "Non-inverting input of amplifier 1. High-impedance input; input bias current typically -20 nA. Common-mode input voltage range includes ground."+ "description": "Non-inverting input of amplifier 1. Common-mode input voltage range includes ground (0 V to V_CC-1.5 V), enabling direct sensing near GND on single-supply rails." }, { "number": "4", "name": "GND", "type": "power_in",- "description": "Ground (or VCC-) for both amplifiers. In single-supply operation this pin connects to system ground; in split-supply operation this pin is the negative supply rail."+ "description": "Negative supply / ground reference (V_CC-). Tie to system ground for single-supply operation, or to the negative rail for split-supply operation (V_CC - GND up to 32 V for V-suffix parts)." }, { "number": "5", "name": "2IN+", "type": "input",- "description": "Non-inverting input of amplifier 2. High-impedance input; input bias current typically -20 nA. Common-mode input voltage range includes ground."+ "description": "Non-inverting input of amplifier 2. Common-mode input voltage range includes ground (0 V to V_CC-1.5 V)." }, { "number": "6", "name": "2IN-", "type": "input",- "description": "Inverting input of amplifier 2. High-impedance input; input bias current typically -20 nA. Common-mode input voltage range includes ground (0 V to VCC-1.5 V typ)."+ "description": "Inverting input of amplifier 2. Differential input voltage rating \u00b132 V (V-suffix); input bias current -20 nA typ." }, { "number": "7", "name": "2OUT", "type": "output",- "description": "Output of amplifier 2. Push-pull output stage; short-circuit protected to GND for VCC <= 15 V."+ "description": "Output of amplifier 2. Same class-B output stage as 1OUT; short-circuit output current \u00b140 mA typ at V_CC = 5 V." }, { "number": "8", "name": "VCC", "type": "power_in",- "description": "Positive supply voltage. Operating range 3 V to 32 V for V-suffix devices (LM2904AVQDRQ1). Recommended to bypass with a local decoupling capacitor. Supply current typically 0.7 mA for both amplifiers."+ "description": "Positive supply rail. 3 V to 32 V for V-suffix devices (3 V to 26 V for non-V), shared by both amplifiers; total quiescent current 0.7 mA typ, 1.2 mA max." } ], "provenance": {@@ -138,8 +138,5 @@ "docs/lm2904avqdrq1-datasheet.pdf", "viewers/symbol.html", "viewers/footprint.html"- ],- "visibility": {- "public": true- }+ ] }