main
Ray
lm2903wdt: specified limits as data (metadata.characteristics, 28 rows from the datasheet)
f25e02a
LM2903WDT
STMicroelectronics · Comparators · SO-8
LM2903WDT from STMicroelectronics, in a SO-8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | Output 1 | output | Comparator 1 open-collector output with 250 mV typical saturation voltage at Isink = 4 mA and maximum 700 mV over operating temperature. |
| 2 | Inverting input 1 | input | Inverting input of comparator 1 with 25 nA typical input bias current and ±5 nA typical input offset current. |
| 3 | Non-inverting input 1 | input | Non-inverting input of comparator 1 with 25 nA typical input bias current and ±5 nA typical input offset current. |
| 4 | VCC- | power_in | Negative supply voltage; 0 V for single supply operation (0 to +36 V) or -18 V for split supply operation (±1 V to ±18 V). |
| 5 | Non-inverting input 2 | input | Non-inverting input of comparator 2 with 25 nA typical input bias current and ±5 nA typical input offset current. |
| 6 | Inverting input 2 | input | Inverting input of comparator 2 with 25 nA typical input bias current and ±5 nA typical input offset current. |
| 7 | Output 2 | output | Comparator 2 open-collector output with 250 mV typical saturation voltage at Isink = 4 mA and maximum 700 mV over operating temperature. |
| 8 | VCC+ | power_in | Positive supply voltage; +2 V to +36 V for single supply operation or +1 V to +18 V for split supply operation. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | STMicroelectronics |
| Package | SO-8 |
| Category | Amplifiers/Comparators |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input offset voltage (Tamb = 25 °C) | Vio | 1 | 7 | mV | VCC+ = 5 V, VCC- = GND, Tamb = 25 °C | 5 | |
| Input offset voltage (over temperature) | Vio | 15 | mV | Tmin ≤ Tamb ≤ Tmax | 5 | ||
| Input offset current (Tamb = 25 °C) | Iio | 5 | 50 | nA | VCC+ = 5 V, VCC- = GND, Tamb = 25 °C | 5 | |
| Input offset current (over temperature) | Iio | 150 | nA | Tmin ≤ Tamb ≤ Tmax | 5 | ||
| Input bias current (Tamb = 25 °C) | Iib | 25 | 250 | nA | VCC+ = 5 V, VCC- = GND, Tamb = 25 °C | 5 | |
| Input bias current (over temperature) | Iib | 400 | nA | Tmin ≤ Tamb ≤ Tmax | 5 | ||
| Large signal voltage gain | Avd | 25 | 200 | V/mV | VCC = 15 V, RL = 15 kΩ, Vo = 1 to 11 V | 5 | |
| Supply current (all comparators), VCC = 5 V | ICC | 0.4 | 1 | mA | VCC = 5 V, no load | 5 | |
| Supply current (all comparators), VCC = 30 V | ICC | 1 | 2.5 | mA | VCC = 30 V, no load | 5 | |
| Low level output voltage (Tamb = 25 °C) | VOL | 250 | 400 | mV | Vid = -1 V, Isink = 4 mA | 5 | |
| Low level output voltage (over temperature) | VOL | 700 | mV | Vid = -1 V, Isink = 4 mA, Tmin ≤ Tamb ≤ Tmax | 5 | ||
| High level output current (Tamb = 25 °C) | IOH | 0.1 | nA | VCC = Vo = 30 V, Vid = 1 V | 5 | ||
| High level output current (over temperature) | IOH | 1 | µA | VCC = Vo = 30 V, Vid = 1 V, Tmin ≤ Tamb ≤ Tmax | 5 | ||
| Output sink current | Isink | 6 | 16 | mA | Vid = -1 V, Vo = 1.5 V | 5 | |
| Common mode input voltage range | Vicm | 0 | V | Tmin ≤ Tamb ≤ Tmax (max printed as VCC+ -2 V over temperature; VCC+ -1.5 V at 25 °C) | 4 | ||
| Operating free-air temperature range | Toper | -40 | 125 | °C | 4 | ||
| Supply voltage | VCC | -18 | 36 | V | Printed as ±18 or 36 V (dual ±18 V or single 36 V) | 4 | |
| Output voltage | Vout | 36 | V | 4 | |||
| Maximum junction temperature | Tj | 150 | °C | 4 | |||
| Storage temperature range | Tstg | -65 | 150 | °C | 4 | ||
| ESD human body model | ESD | 2000 | V | HBM, 100 pF charged through 1.5 kΩ | 4 | ||
| ESD machine model | ESD | 200 | V | MM, 200 pF, no series resistor | 4 | ||
| ESD charged device model | ESD | 1500 | V | CDM | 4 | ||
| Thermal resistance junction to ambient, SO-8 | Rthja | 125 | °C/W | Typical value, four-layer PCB | 4 | ||
| Thermal resistance junction to case, SO-8 | Rthjc | 40 | °C/W | Typical value | 4 | ||
| Small signal response time | tres | 1.3 | µs | RL = 5.1 kΩ to VCC+, 100 mV input step with 5 mV overdrive | 5 | ||
| Large signal response time (50 % of final value) | trel | 500 | ns | TTL input, Vref = +1.4 V, RL = 5.1 kΩ to VCC+, output at 50 % of final value | 5 | ||
| Large signal response time (95 % of final value) | trel | 1 | µs | TTL input, Vref = +1.4 V, RL = 5.1 kΩ to VCC+, output at 95 % of final value | 5 |
CAD (KiCad official)
- Symbol:
LM2903WDT - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SO-8 (KiCad packages3D, STEP)
- 3D model files:
lm2903wdt-etched.step/lm2903wdt-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);lm2903wdt.step/lm2903wdt.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: STMicroelectronics datasheet (16 pp, sha256
16f1dc1b15fe0cd9, retrieved 2026-09-23, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.2, primaryclaude-haiku-4-5-20251001(text), consensusclaude-sonnet-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# LM2903WDT
**STMicroelectronics** · Comparators · SO-8
LM2903WDT from STMicroelectronics, in a SO-8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | Output 1 | output | Comparator 1 open-collector output with 250 mV typical saturation voltage at Isink = 4 mA and maximum 700 mV over operating temperature. |
| 2 | Inverting input 1 | input | Inverting input of comparator 1 with 25 nA typical input bias current and ±5 nA typical input offset current. |
| 3 | Non-inverting input 1 | input | Non-inverting input of comparator 1 with 25 nA typical input bias current and ±5 nA typical input offset current. |
| 4 | VCC- | power_in | Negative supply voltage; 0 V for single supply operation (0 to +36 V) or -18 V for split supply operation (±1 V to ±18 V). |
| 5 | Non-inverting input 2 | input | Non-inverting input of comparator 2 with 25 nA typical input bias current and ±5 nA typical input offset current. |
| 6 | Inverting input 2 | input | Inverting input of comparator 2 with 25 nA typical input bias current and ±5 nA typical input offset current. |
| 7 | Output 2 | output | Comparator 2 open-collector output with 250 mV typical saturation voltage at Isink = 4 mA and maximum 700 mV over operating temperature. |
| 8 | VCC+ | power_in | Positive supply voltage; +2 V to +36 V for single supply operation or +1 V to +18 V for split supply operation. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | STMicroelectronics |
| Package | SO-8 |
| Category | Amplifiers/Comparators |
| Pins | 8 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input offset voltage (Tamb = 25 °C) | Vio | | 1 | 7 | mV | VCC+ = 5 V, VCC- = GND, Tamb = 25 °C | 5 |
| Input offset voltage (over temperature) | Vio | | | 15 | mV | Tmin ≤ Tamb ≤ Tmax | 5 |
| Input offset current (Tamb = 25 °C) | Iio | | 5 | 50 | nA | VCC+ = 5 V, VCC- = GND, Tamb = 25 °C | 5 |
| Input offset current (over temperature) | Iio | | | 150 | nA | Tmin ≤ Tamb ≤ Tmax | 5 |
| Input bias current (Tamb = 25 °C) | Iib | | 25 | 250 | nA | VCC+ = 5 V, VCC- = GND, Tamb = 25 °C | 5 |
| Input bias current (over temperature) | Iib | | | 400 | nA | Tmin ≤ Tamb ≤ Tmax | 5 |
| Large signal voltage gain | Avd | 25 | 200 | | V/mV | VCC = 15 V, RL = 15 kΩ, Vo = 1 to 11 V | 5 |
| Supply current (all comparators), VCC = 5 V | ICC | | 0.4 | 1 | mA | VCC = 5 V, no load | 5 |
| Supply current (all comparators), VCC = 30 V | ICC | | 1 | 2.5 | mA | VCC = 30 V, no load | 5 |
| Low level output voltage (Tamb = 25 °C) | VOL | | 250 | 400 | mV | Vid = -1 V, Isink = 4 mA | 5 |
| Low level output voltage (over temperature) | VOL | | | 700 | mV | Vid = -1 V, Isink = 4 mA, Tmin ≤ Tamb ≤ Tmax | 5 |
| High level output current (Tamb = 25 °C) | IOH | | 0.1 | | nA | VCC = Vo = 30 V, Vid = 1 V | 5 |
| High level output current (over temperature) | IOH | | | 1 | µA | VCC = Vo = 30 V, Vid = 1 V, Tmin ≤ Tamb ≤ Tmax | 5 |
| Output sink current | Isink | 6 | 16 | | mA | Vid = -1 V, Vo = 1.5 V | 5 |
| Common mode input voltage range | Vicm | 0 | | | V | Tmin ≤ Tamb ≤ Tmax (max printed as VCC+ -2 V over temperature; VCC+ -1.5 V at 25 °C) | 4 |
| Operating free-air temperature range | Toper | -40 | | 125 | °C | | 4 |
| Supply voltage | VCC | -18 | | 36 | V | Printed as ±18 or 36 V (dual ±18 V or single 36 V) | 4 |
| Output voltage | Vout | | | 36 | V | | 4 |
| Maximum junction temperature | Tj | | | 150 | °C | | 4 |
| Storage temperature range | Tstg | -65 | | 150 | °C | | 4 |
| ESD human body model | ESD | | | 2000 | V | HBM, 100 pF charged through 1.5 kΩ | 4 |
| ESD machine model | ESD | | | 200 | V | MM, 200 pF, no series resistor | 4 |
| ESD charged device model | ESD | | | 1500 | V | CDM | 4 |
| Thermal resistance junction to ambient, SO-8 | Rthja | | 125 | | °C/W | Typical value, four-layer PCB | 4 |
| Thermal resistance junction to case, SO-8 | Rthjc | | 40 | | °C/W | Typical value | 4 |
| Small signal response time | tres | | 1.3 | | µs | RL = 5.1 kΩ to VCC+, 100 mV input step with 5 mV overdrive | 5 |
| Large signal response time (50 % of final value) | trel | | 500 | | ns | TTL input, Vref = +1.4 V, RL = 5.1 kΩ to VCC+, output at 50 % of final value | 5 |
| Large signal response time (95 % of final value) | trel | | 1 | | µs | TTL input, Vref = +1.4 V, RL = 5.1 kΩ to VCC+, output at 95 % of final value | 5 |
## CAD (KiCad official)
- Symbol: `LM2903WDT`
- Footprint: `Package_SO:SOIC-8_3.9x4.9mm_P1.27mm`
- 3D model: SO-8 (KiCad packages3D, STEP)
- 3D model files: `lm2903wdt-etched.step` / `lm2903wdt-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `lm2903wdt.step` / `lm2903wdt.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [STMicroelectronics datasheet](https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8603086153155293184) (16 pp, sha256 `16f1dc1b15fe0cd9`, retrieved 2026-09-23, tier: lcsc)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.2`, primary `claude-haiku-4-5-20251001` (text), consensus `claude-sonnet-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/lm2903wdt-datasheet.pdf)