3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownLM2903VQPWRQ1
Texas Instruments · Comparators · TSSOP-8
LM2903VQPWRQ1 from Texas Instruments, in a TSSOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | 1OUT | output | Output pin of comparator 1 |
| 2 | 1IN- | input | Negative input pin of comparator 1 |
| 3 | 1IN+ | input | Positive input pin of comparator 1 |
| 4 | GND | power_in | Ground |
| 5 | 2IN+ | input | Positive input pin of comparator 2 |
| 6 | 2IN- | input | Negative input pin of comparator 2 |
| 7 | 2OUT | output | Output pin of comparator 2 |
| 8 | VCC | power_in | Positive supply voltage |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | TSSOP-8 |
| Category | Amplifiers/Comparators |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage VCC (absolute maximum) | VCC | 36 | V | 4 | |||
| Differential input voltage | VID | -36 | 36 | V | 4 | ||
| Input voltage range (either input) | VI | -0.3 | 36 | V | 4 | ||
| Output voltage | VO | 36 | V | 4 | |||
| Output current | IO | 20 | mA | 4 | |||
| Operating virtual-junction temperature | TJ | 150 | °C | 4 | |||
| Storage temperature range (LM2903-Q1 only) | Tstg | -65 | 150 | °C | LM2903-Q1 only | 4 | |
| Electrostatic discharge, human body model (HBM) | V(ESD) | -1000 | 1000 | V | Per AEC Q100-002 | 4 | |
| Electrostatic discharge, charged device model (CDM) | V(ESD) | -750 | 750 | V | Per AEC Q100-011, all pins | 4 | |
| Supply voltage VCC (V devices) | VCC | 2 | 32 | V | V devices | 5 | |
| Junction temperature | TJ | -40 | 125 | °C | 5 | ||
| Input offset voltage (non-A devices) | VIO | 2 | 7 | mV | VO = 1.4V, VIC = VIC(min), VCC = 5V to MAX; TA = 25°C | 7 | |
| Input offset voltage (non-A devices) | VIO | 15 | mV | VO = 1.4V, VIC = VIC(min), VCC = 5V to MAX; Full range | 7 | ||
| Input offset current | IIO | 5 | 50 | nA | VO = 1.4V; TA = 25°C | 7 | |
| Input offset current | IIO | 200 | nA | VO = 1.4V; Full range | 7 | ||
| Input bias current | IIB | -25 | -250 | nA | VO = 1.4V; TA = 25°C | 7 | |
| Input bias current | IIB | -500 | nA | VO = 1.4V; Full range | 7 | ||
| Common-mode input voltage range | VICR | 0 | V | TA = 25°C; upper limit printed as VCC−1.5 | 7 | ||
| Large-signal differential-voltage amplification | AVD | 25 | 100 | V/mV | VCC = 15V, VO = 1.4V to 11.4V, RL ≥ 15kΩ to VCC; TA = 25°C | 7 | |
| High-level output current | IOH | 0.1 | 50 | nA | VOH = 5V, VID = 1V; TA = 25°C | 7 | |
| High-level output current | IOH | 1 | µA | VOH = VCC MAX; Full range | 7 | ||
| Low-level output voltage | VOL | 150 | 400 | mV | IOL = 4mA, VID = −1V; TA = 25°C | 7 | |
| Low-level output voltage | VOL | 700 | mV | IOL = 4mA, VID = −1V; Full range | 7 | ||
| Low-level output current | IOL | 6 | mA | VOL = 1.5V, VID = −1V; TA = 25°C | 7 | ||
| Supply current | ICC | 0.8 | 1 | mA | RL = ∞, VCC = 5V; TA = 25°C | 7 | |
| Supply current | ICC | 2.5 | mA | RL = ∞, VCC = MAX; Full range | 7 | ||
| Junction-to-ambient thermal resistance (PW/TSSOP) | RθJA | 182.9 | °C/W | 5 | |||
| Junction-to-case (top) thermal resistance (PW/TSSOP) | RθJC(top) | 87.1 | °C/W | 5 | |||
| Junction-to-board thermal resistance (PW/TSSOP) | RθJB | 123.2 | °C/W | 5 | |||
| Junction-to-top characterization parameter (PW/TSSOP) | ψJT | 16.7 | °C/W | 5 | |||
| Junction-to-board characterization parameter (PW/TSSOP) | ψJB | 120.4 | °C/W | 5 |
CAD (KiCad official)
- Symbol:
LM2903VQPWRQ1 - Footprint:
Package_SO:TSSOP-8_3x3mm_P0.65mm - 3D model: TSSOP-8 (KiCad packages3D, STEP)
- 3D model files:
lm2903vqpwrq1-etched.step/lm2903vqpwrq1-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);lm2903vqpwrq1.step/lm2903vqpwrq1.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (47 pp, sha256
765b5f97d419335c, retrieved 2026-10-03, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-4-5-20251001(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).