main
Ray
Publish 0.1.1
ddad72a
LM2903Q2T
STMicroelectronics · Comparators · DFN-8(2x2)
LM2903Q2T from STMicroelectronics, in a DFN-8(2x2). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol and footprint from KiCad-official CAD; the 3D model is generated from the datasheet's package dimensions.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | Out1 | output | Open-collector output of comparator 1, sinking typically 250 mV at 4 mA and a maximum of about 20 mA. |
| 2 | In1- | input | Inverting input of comparator 1, input voltage range -0.3 V to +36 V. |
| 3 | In1+ | input | Non-inverting input of comparator 1, input voltage range -0.3 V to +36 V. |
| 4 | VCC- | power_in | Negative supply, connected to ground in single-supply operation; the input common-mode range includes this rail. |
| 5 | In2+ | input | Non-inverting input of comparator 2, input voltage range -0.3 V to +36 V. |
| 6 | In2- | input | Inverting input of comparator 2, input voltage range -0.3 V to +36 V. |
| 7 | Out2 | output | Open-collector output of comparator 2, sinking typically 250 mV at 4 mA and a maximum of about 20 mA. |
| 8 | VCC+ | power_in | Positive supply, +2 V to +36 V single supply (or ±1 V to ±18 V dual), absolute maximum 36 V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | STMicroelectronics |
| Package | DFN-8(2x2) |
| Category | Amplifiers |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input offset voltage (Tmin ≤ Tamb ≤ Tmax) | Vio | 15 | mV | Tmin ≤ Tamb ≤ Tmax | 6 | ||
| Input offset current (25 °C) | Iio | 5 | 50 | nA | VCC+ = 5 V, VCC- = GND, Tamb = 25 °C | 6 | |
| Input offset current (Tmin ≤ Tamb ≤ Tmax) | Iio | 150 | nA | Tmin ≤ Tamb ≤ Tmax | 6 | ||
| Input bias current (25 °C) | Iib | 25 | 250 | nA | VCC+ = 5 V, VCC- = GND, Tamb = 25 °C | 6 | |
| Input bias current (Tmin ≤ Tamb ≤ Tmax) | Iib | 400 | nA | Tmin ≤ Tamb ≤ Tmax | 6 | ||
| Large signal voltage gain | Avd | 25 | 200 | V/mV | VCC = 15 V, RL = 15 kΩ, Vo = 1 to 11 V | 6 | |
| Supply current (all comparators), VCC = 5 V | ICC | 0.4 | 1 | mA | VCC = 5 V, no load | 6 | |
| Supply current (all comparators), VCC = 30 V | ICC | 1 | 2.5 | mA | VCC = 30 V, no load | 6 | |
| Low level output voltage (25 °C) | VOL | 250 | 400 | mV | Vid = -1 V, Isink = 4 mA | 6 | |
| Low level output voltage (Tmin ≤ Tamb ≤ Tmax) | VOL | 700 | mV | Vid = -1 V, Isink = 4 mA, Tmin ≤ Tamb ≤ Tmax | 6 | ||
| High level output current (Tmin ≤ Tamb ≤ Tmax) | IOH | 1 | µA | VCC = Vo = 30 V, Vid = 1 V, Tmin ≤ Tamb ≤ Tmax | 6 | ||
| High level output current (typ) | IOH | 0.1 | nA | VCC = Vo = 30 V, Vid = 1 V | 6 | ||
| Output sink current | Isink | 6 | 16 | mA | Vid = -1 V, Vo = 1.5 V | 6 | |
| Large signal response time (50% of final value) | trel | 500 | ns | TTL input (Vref = +1.4 V, RL = 5.1 kΩ to VCC+), output at 50% of final value | 6 | ||
| Large signal response time (95% of final value) | trel | 1 | µs | TTL input (Vref = +1.4 V, RL = 5.1 kΩ to VCC+), output at 95% of final value | 6 | ||
| Supply voltage | VCC | 36 | V | Printed as ±18 or 36 | 5 | ||
| Differential input voltage | Vid | -36 | 36 | V | 5 | ||
| Input voltage | Vin | -0.3 | 36 | V | 5 | ||
| Maximum junction temperature | Tj | 150 | °C | 5 | |||
| Storage temperature range | Tstg | -65 | 150 | °C | 5 | ||
| ESD human body model (HBM) | ESD | 800 | V | HBM: 100 pF through 1.5 kΩ | 5 | ||
| ESD machine model (MM) | ESD | 200 | V | MM: 200 pF, no series resistor | 5 | ||
| ESD charged device model (CDM), all packages except MiniSO8 | ESD | 1.5 | kV | CDM, all pins charged to specified voltage | 5 | ||
| Common mode input voltage range (lower limit) | Vicm | 0 | V | Tmin ≤ Tamb ≤ Tmax; upper limit printed as VCC+ - 1.5 V (25 °C) and VCC+ - 2 V over Tmin to Tmax | 5 | ||
| Operating free-air temperature range | Toper | -40 | 125 | °C | 5 | ||
| Thermal resistance junction to ambient, DFN8 2x2 mm | Rthja | 57 | °C/W | DFN8 2x2 mm package | 5 | ||
| Thermal resistance junction to case, DFN8 2x2 mm | Rthjc | 57 | °C/W | DFN8 2x2 mm package | 5 |
CAD (land: KiCad; 3D: generated from the datasheet)
- Symbol:
LM2903Q2T - Footprint:
Package_DFN_QFN:DFN-8_2x2mm_P0.5mm - 3D model: DFN-8(2x2), generated on the KiCad land (body 2 x 2 mm, terminals on the pads, 0.55 mm tall, datasheet A, nominal). KiCad's stock model for this land is taller than the datasheet allows, so the model is generated from the datasheet drawing; the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
- 3D model files:
lm2903q2t-etched.step/lm2903q2t-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);lm2903q2t.step/lm2903q2t.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: STMicroelectronics datasheet (21 pp, sha256
af9ba6882c7a7296, retrieved 2026-11-17, tier: manufacturer) - Extractor:
ds2sf(Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate. - CAD: land: KiCad official libraries (CC-BY-SA 4.0); 3D: generated from the datasheet's package dimensions (provenance.model_3d_generated).
# LM2903Q2T
**STMicroelectronics** · Comparators · DFN-8(2x2)
LM2903Q2T from STMicroelectronics, in a DFN-8(2x2). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol and footprint from KiCad-official CAD; the 3D model is generated from the datasheet's package dimensions.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | Out1 | output | Open-collector output of comparator 1, sinking typically 250 mV at 4 mA and a maximum of about 20 mA. |
| 2 | In1- | input | Inverting input of comparator 1, input voltage range -0.3 V to +36 V. |
| 3 | In1+ | input | Non-inverting input of comparator 1, input voltage range -0.3 V to +36 V. |
| 4 | VCC- | power_in | Negative supply, connected to ground in single-supply operation; the input common-mode range includes this rail. |
| 5 | In2+ | input | Non-inverting input of comparator 2, input voltage range -0.3 V to +36 V. |
| 6 | In2- | input | Inverting input of comparator 2, input voltage range -0.3 V to +36 V. |
| 7 | Out2 | output | Open-collector output of comparator 2, sinking typically 250 mV at 4 mA and a maximum of about 20 mA. |
| 8 | VCC+ | power_in | Positive supply, +2 V to +36 V single supply (or ±1 V to ±18 V dual), absolute maximum 36 V. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | STMicroelectronics |
| Package | DFN-8(2x2) |
| Category | Amplifiers |
| Pins | 8 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input offset voltage (Tmin ≤ Tamb ≤ Tmax) | Vio | | | 15 | mV | Tmin ≤ Tamb ≤ Tmax | 6 |
| Input offset current (25 °C) | Iio | | 5 | 50 | nA | VCC+ = 5 V, VCC- = GND, Tamb = 25 °C | 6 |
| Input offset current (Tmin ≤ Tamb ≤ Tmax) | Iio | | | 150 | nA | Tmin ≤ Tamb ≤ Tmax | 6 |
| Input bias current (25 °C) | Iib | | 25 | 250 | nA | VCC+ = 5 V, VCC- = GND, Tamb = 25 °C | 6 |
| Input bias current (Tmin ≤ Tamb ≤ Tmax) | Iib | | | 400 | nA | Tmin ≤ Tamb ≤ Tmax | 6 |
| Large signal voltage gain | Avd | 25 | 200 | | V/mV | VCC = 15 V, RL = 15 kΩ, Vo = 1 to 11 V | 6 |
| Supply current (all comparators), VCC = 5 V | ICC | | 0.4 | 1 | mA | VCC = 5 V, no load | 6 |
| Supply current (all comparators), VCC = 30 V | ICC | | 1 | 2.5 | mA | VCC = 30 V, no load | 6 |
| Low level output voltage (25 °C) | VOL | | 250 | 400 | mV | Vid = -1 V, Isink = 4 mA | 6 |
| Low level output voltage (Tmin ≤ Tamb ≤ Tmax) | VOL | | | 700 | mV | Vid = -1 V, Isink = 4 mA, Tmin ≤ Tamb ≤ Tmax | 6 |
| High level output current (Tmin ≤ Tamb ≤ Tmax) | IOH | | | 1 | µA | VCC = Vo = 30 V, Vid = 1 V, Tmin ≤ Tamb ≤ Tmax | 6 |
| High level output current (typ) | IOH | | 0.1 | | nA | VCC = Vo = 30 V, Vid = 1 V | 6 |
| Output sink current | Isink | 6 | 16 | | mA | Vid = -1 V, Vo = 1.5 V | 6 |
| Large signal response time (50% of final value) | trel | | | 500 | ns | TTL input (Vref = +1.4 V, RL = 5.1 kΩ to VCC+), output at 50% of final value | 6 |
| Large signal response time (95% of final value) | trel | | | 1 | µs | TTL input (Vref = +1.4 V, RL = 5.1 kΩ to VCC+), output at 95% of final value | 6 |
| Supply voltage | VCC | | | 36 | V | Printed as ±18 or 36 | 5 |
| Differential input voltage | Vid | -36 | | 36 | V | | 5 |
| Input voltage | Vin | -0.3 | | 36 | V | | 5 |
| Maximum junction temperature | Tj | | | 150 | °C | | 5 |
| Storage temperature range | Tstg | -65 | | 150 | °C | | 5 |
| ESD human body model (HBM) | ESD | | | 800 | V | HBM: 100 pF through 1.5 kΩ | 5 |
| ESD machine model (MM) | ESD | | | 200 | V | MM: 200 pF, no series resistor | 5 |
| ESD charged device model (CDM), all packages except MiniSO8 | ESD | | | 1.5 | kV | CDM, all pins charged to specified voltage | 5 |
| Common mode input voltage range (lower limit) | Vicm | 0 | | | V | Tmin ≤ Tamb ≤ Tmax; upper limit printed as VCC+ - 1.5 V (25 °C) and VCC+ - 2 V over Tmin to Tmax | 5 |
| Operating free-air temperature range | Toper | -40 | | 125 | °C | | 5 |
| Thermal resistance junction to ambient, DFN8 2x2 mm | Rthja | | 57 | | °C/W | DFN8 2x2 mm package | 5 |
| Thermal resistance junction to case, DFN8 2x2 mm | Rthjc | | 57 | | °C/W | DFN8 2x2 mm package | 5 |
## CAD (land: KiCad; 3D: generated from the datasheet)
- Symbol: `LM2903Q2T`
- Footprint: `Package_DFN_QFN:DFN-8_2x2mm_P0.5mm`
- 3D model: DFN-8(2x2), generated on the KiCad land (body 2 x 2 mm, terminals on the pads, 0.55 mm tall, datasheet A, nominal). KiCad's stock model for this land is taller than the datasheet allows, so the model is generated from the datasheet drawing; the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
- 3D model files: `lm2903q2t-etched.step` / `lm2903q2t-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `lm2903q2t.step` / `lm2903q2t.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [STMicroelectronics datasheet](https://www.st.com/resource/en/datasheet/lm2903q2t.pdf) (21 pp, sha256 `af9ba6882c7a7296`, retrieved 2026-11-17, tier: manufacturer)
- **Extractor:** `ds2sf` (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
- **CAD:** land: KiCad official libraries (CC-BY-SA 4.0); 3D: generated from the datasheet's package dimensions (provenance.model_3d_generated).
[Datasheet PDF](docs/lm2903q2t-datasheet.pdf)