main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs lm2903p: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
viewers lm2903p: viewers · Ray
lm2903p-etched.fit.json lm2903p: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
lm2903p-etched.glb lm2903p: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
lm2903p-etched.step lm2903p: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
lm2903p.glb Publish 0.1.0 · Ray
lm2903p.kicad_mod Publish 0.1.0 · Ray
lm2903p.kicad_sym Publish 0.1.0 · Ray
lm2903p.lbr Publish 0.1.0 · Ray
lm2903p.step Publish 0.1.0 · Ray
package.json Publish 0.1.0 · Ray
page.json lm2903p: specified limits as data (metadata.characteristics, 24 rows from the datasheet) · Ray
README.md lm2903p: specified limits as data (metadata.characteristics, 24 rows from the datasheet) · Ray

LM2903P

Texas Instruments · Comparators · PDIP-8

LM2903P from Texas Instruments, in a PDIP-8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 1OUT output Comparator 1 open-collector output. Sinks up to ~6 mA (VOL ≈ 150 mV @ 4 mA, VID = -1 V); requires an external pull-up resistor to VCC (or another rail up to 36 V). May be wire-AND'd with other open-collector outputs.
2 1IN- input Comparator 1 inverting input. Common-mode range 0 V to VCC-1.5 V; typical input bias current 25 nA. When 1IN- > 1IN+, the 1OUT open-collector transistor conducts (output pulled low).
3 1IN+ input Comparator 1 non-inverting input. Common-mode range includes ground (0 V to VCC-1.5 V). Differential input voltage rating up to ±36 V.
4 GND power_in Device ground / negative supply return. In single-supply operation tied to 0 V; in dual-supply operation this is the V- rail. All voltages in the datasheet are referenced to this pin.
5 2IN+ input Comparator 2 non-inverting input. Common-mode range includes ground (0 V to VCC-1.5 V). Differential input voltage rating up to ±36 V.
6 2IN- input Comparator 2 inverting input. Common-mode range 0 V to VCC-1.5 V; typical input bias current 25 nA. When 2IN- > 2IN+, the 2OUT open-collector transistor conducts (output pulled low).
7 2OUT output Comparator 2 open-collector output. Sinks up to ~6 mA (VOL ≈ 150 mV @ 4 mA); requires an external pull-up resistor to VCC (or another rail up to 36 V). May be wire-AND'd with other open-collector outputs.
8 VCC power_in Positive supply. Single-supply range 2 V to 36 V (LM2903 tested to 30 V); dual-supply operation permitted as long as total is 2-36 V and VCC is at least 1.5 V above the input common-mode voltage. Typical supply current 0.4 mA per comparator, independent of VCC.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package PDIP-8
Category Op-amp/Cmp
Pins 8

Ordering variants

  • LM2903PP
  • LM2903PD
  • LM2903PDR
  • LM2903PDRG3
  • LM2903PPSR
  • LM2903PPWR
  • LM2903PPWRG3
  • LM2903PDGKR

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Input offset voltage (25°C) VIO 2 7 mV TA = 25°C; VCC = 5 V to MAX, VO = 1.4 V, VIC = VIC(min) 6
Input offset voltage (full range) VIO 15 mV TA = full range (−40°C to 125°C); VCC = 5 V to MAX, VO = 1.4 V, VIC = VIC(min) 6
Input offset current (25°C) IIO 5 50 nA TA = 25°C; VO = 1.4 V 6
Input offset current (full range) IIO 200 nA TA = full range; VO = 1.4 V 6
Input bias current (25°C) IIB -25 -250 nA TA = 25°C; VO = 1.4 V 6
Input bias current (full range) IIB -500 nA TA = full range; VO = 1.4 V 6
Common-mode input voltage range (25°C), lower limit VICR 0 V TA = 25°C; upper limit printed as VCC − 1.5 V (not a number) 6
Common-mode input voltage range (full range), lower limit VICR 0 V TA = full range; upper limit printed as VCC − 2 V (not a number) 6
Large-signal differential-voltage amplification AVD 25 100 V/mV VCC = 15 V, VO = 1.4 V to 11.4 V, RL ≥ 15 kΩ to VCC 6
High-level output current (25°C) IOH 0.1 50 nA TA = 25°C; VOH = 5 V, VID = 1 V 6
High-level output current (full range) IOH 1 µA TA = full range; VOH = VCC MAX, VID = 1 V 6
Low-level output voltage (25°C) VOL 150 400 mV TA = 25°C; IOL = 4 mA, VID = −1 V 6
Low-level output voltage (full range) VOL 700 mV TA = full range; IOL = 4 mA, VID = −1 V 6
Low-level output current (25°C) IOL 6 mA TA = 25°C; VOL = 1.5 V, VID = −1 V 6
Supply current (25°C) ICC 0.8 1 mA TA = 25°C; VCC = 5 V, RL = ∞ 6
Supply current (full range) ICC 2.5 mA TA = full range; VCC = MAX, RL = ∞ 6
Supply voltage (absolute maximum) VCC 36 V 3
Differential input voltage VID -36 36 V 3
Input voltage range (either input) VI -0.3 36 V 3
Output voltage VO 36 V 3
Output current IO 20 mA 3
Operating virtual junction temperature TJ 150 °C 3
Storage temperature range Tstg -65 150 °C 3
Package thermal impedance θJA, P package θJA 85 °C/W P package (PDIP); printed value without min/max 3

CAD (KiCad official)

  • Symbol: LM2903P
  • Footprint: Package_DIP:DIP-8_W7.62mm
  • 3D model: PDIP-8 (KiCad packages3D, STEP)
  • 3D model files: lm2903p-etched.step / lm2903p-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); lm2903p.step / lm2903p.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (None pp, sha256 e8887a387108a098, retrieved 2026-08-17, tier: manufacturer)
  • Extractor: ds2sf (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF