← Commit history

lm2903p: restore the component block (pinout + model declarations) from this page's own README and symbol

Ray ·f95990f1b9 · ·parent ab5f38c
1 file changed +75−1
page.json+75−1
@@ -33,5 +33,79 @@   "author": {     "name": "Ray",     "email": "[email protected]"+  },+  "component": {+    "mpn": "LM2903P",+    "manufacturer": "Texas Instruments",+    "package": "PDIP-8",+    "pin_count": 8,+    "category": "Comparators",+    "datasheet": "https://www.ti.com/lit/ds/symlink/lm2903p.pdf",+    "parts": {+      "symbol": "lm2903p.kicad_sym",+      "footprint": "lm2903p.kicad_mod",+      "model_3d": "lm2903p-etched.glb",+      "model_3d_plain": "lm2903p.glb",+      "model_3d_step": "lm2903p-etched.step",+      "model_3d_step_plain": "lm2903p.step",+      "lbr": "lm2903p.lbr"+    },+    "pins": [+      {+        "number": "1",+        "name": "1OUT",+        "type": "output",+        "description": "Comparator 1 open-collector output. Sinks up to ~6 mA (VOL ≈ 150 mV @ 4 mA, VID = -1 V); requires an external pull-up resistor to VCC (or another rail up to 36 V). May be wire-AND'd with other open-collector outputs."+      },+      {+        "number": "2",+        "name": "1IN-",+        "type": "input",+        "description": "Comparator 1 inverting input. Common-mode range 0 V to VCC-1.5 V; typical input bias current 25 nA. When 1IN- > 1IN+, the 1OUT open-collector transistor conducts (output pulled low)."+      },+      {+        "number": "3",+        "name": "1IN+",+        "type": "input",+        "description": "Comparator 1 non-inverting input. Common-mode range includes ground (0 V to VCC-1.5 V). Differential input voltage rating up to ±36 V."+      },+      {+        "number": "4",+        "name": "GND",+        "type": "power_in",+        "description": "Device ground / negative supply return. In single-supply operation tied to 0 V; in dual-supply operation this is the V- rail. All voltages in the datasheet are referenced to this pin."+      },+      {+        "number": "5",+        "name": "2IN+",+        "type": "input",+        "description": "Comparator 2 non-inverting input. Common-mode range includes ground (0 V to VCC-1.5 V). Differential input voltage rating up to ±36 V."+      },+      {+        "number": "6",+        "name": "2IN-",+        "type": "input",+        "description": "Comparator 2 inverting input. Common-mode range 0 V to VCC-1.5 V; typical input bias current 25 nA. When 2IN- > 2IN+, the 2OUT open-collector transistor conducts (output pulled low)."+      },+      {+        "number": "7",+        "name": "2OUT",+        "type": "output",+        "description": "Comparator 2 open-collector output. Sinks up to ~6 mA (VOL ≈ 150 mV @ 4 mA); requires an external pull-up resistor to VCC (or another rail up to 36 V). May be wire-AND'd with other open-collector outputs."+      },+      {+        "number": "8",+        "name": "VCC",+        "type": "power_in",+        "description": "Positive supply. Single-supply range 2 V to 36 V (LM2903 tested to 30 V); dual-supply operation permitted as long as total is 2-36 V and VCC is at least 1.5 V above the input common-mode voltage. Typical supply current 0.4 mA per comparator, independent of VCC."+      }+    ],+    "provenance": {+      "rebuilt": "component block rebuilt 2026-10-05 from this page's own README pinout table and .kicad_sym (pins cross-checked), no re-extraction"+    },+    "viewers": {+      "symbol": "viewers/symbol.html",+      "footprint": "viewers/footprint.html"+    }   }-}\ No newline at end of file+}