← Commit history
README.mdadded+54@@ -0,0 +1,54 @@+# LM2903P++**Texas Instruments** · Comparators · PDIP-8++LM2903P from Texas Instruments, in a PDIP-8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | 1OUT | output | Comparator 1 open-collector output. Sinks up to ~6 mA (VOL ≈ 150 mV @ 4 mA, VID = -1 V); requires an external pull-up resistor to VCC (or another rail up to 36 V). May be wire-AND'd with other open-collector outputs. |+| 2 | 1IN- | input | Comparator 1 inverting input. Common-mode range 0 V to VCC-1.5 V; typical input bias current 25 nA. When 1IN- > 1IN+, the 1OUT open-collector transistor conducts (output pulled low). |+| 3 | 1IN+ | input | Comparator 1 non-inverting input. Common-mode range includes ground (0 V to VCC-1.5 V). Differential input voltage rating up to ±36 V. |+| 4 | GND | power_in | Device ground / negative supply return. In single-supply operation tied to 0 V; in dual-supply operation this is the V- rail. All voltages in the datasheet are referenced to this pin. |+| 5 | 2IN+ | input | Comparator 2 non-inverting input. Common-mode range includes ground (0 V to VCC-1.5 V). Differential input voltage rating up to ±36 V. |+| 6 | 2IN- | input | Comparator 2 inverting input. Common-mode range 0 V to VCC-1.5 V; typical input bias current 25 nA. When 2IN- > 2IN+, the 2OUT open-collector transistor conducts (output pulled low). |+| 7 | 2OUT | output | Comparator 2 open-collector output. Sinks up to ~6 mA (VOL ≈ 150 mV @ 4 mA); requires an external pull-up resistor to VCC (or another rail up to 36 V). May be wire-AND'd with other open-collector outputs. |+| 8 | VCC | power_in | Positive supply. Single-supply range 2 V to 36 V (LM2903 tested to 30 V); dual-supply operation permitted as long as total is 2-36 V and VCC is at least 1.5 V above the input common-mode voltage. Typical supply current 0.4 mA per comparator, independent of VCC. |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | Texas Instruments |+| Package | PDIP-8 |+| Category | Op-amp/Cmp |+| Pins | 8 |++## Ordering variants++- `LM2903PP`+- `LM2903PD`+- `LM2903PDR`+- `LM2903PDRG3`+- `LM2903PPSR`+- `LM2903PPWR`+- `LM2903PPWRG3`+- `LM2903PDGKR`++## CAD (KiCad official)++- Symbol: `LM2903P`+- Footprint: `Package_DIP:DIP-8_W7.62mm`+- 3D model: PDIP-8 (KiCad packages3D, STEP)++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/lit/ds/symlink/lm2903p.pdf) (None pp, sha256 `e8887a387108a098`, retrieved 2026-08-17, tier: manufacturer)+- **Extractor:** `ds2sf` (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/lm2903p-datasheet.pdf)
page.jsonadded+34@@ -0,0 +1,34 @@+{+ "slug": "lm2903p",+ "version": "0.1.0",+ "type": "component",+ "description": "Texas Instruments Comparators, PDIP-8. Datasheet-verified pinout, KiCad symbol/footprint/3D.",+ "tags": [+ "component",+ "op-amp-cmp",+ "lm2903p"+ ],+ "dependencies": {},+ "hero": {+ "type": "image",+ "path": "docs/hero.png"+ },+ "files": [+ "page.json",+ "README.md",+ "lm2903p.kicad_sym",+ "lm2903p.kicad_mod",+ "lm2903p.glb",+ "lm2903p.step",+ "lm2903p.lbr",+ "docs/hero.png",+ "docs/lm2903p-datasheet.pdf",+ "viewers/symbol.html",+ "viewers/footprint.html"+ ],+ "visibility": "public",+ "author": {+ "name": "Ray",+ "email": "[email protected]"+ }+}