main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs lm2903dmr2g: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
viewers lm2903dmr2g: viewers · Ray
lm2903dmr2g-etched.fit.json lm2903dmr2g: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
lm2903dmr2g-etched.glb lm2903dmr2g: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
lm2903dmr2g-etched.step lm2903dmr2g: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
lm2903dmr2g.glb Publish 0.1.0 · Ray
lm2903dmr2g.kicad_mod Publish 0.1.0 · Ray
lm2903dmr2g.kicad_sym Publish 0.1.0 · Ray
lm2903dmr2g.lbr Publish 0.1.0 · Ray
lm2903dmr2g.step Publish 0.1.0 · Ray
package.json Publish 0.1.0 · Ray
page.json lm2903dmr2g: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding) · Ray
README.md lm2903dmr2g: laser-etched CAD + chip hero (factory 2.0.0 backfill) · Ray

LM2903DMR2G

onsemi · Comparators · MSOP-8

LM2903DMR2G from onsemi, in a MSOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 OUTA output Open-collector output of comparator A. Requires an external pull-up resistor to a positive supply (typically 3-30 V). Sinks current when the inverting input is above the non-inverting input.
2 IN A- input Inverting input of comparator A. Common-mode input voltage range includes ground; can operate from V- (GND) up to (VCC - 1.5 V).
3 IN A+ input Non-inverting input of comparator A. Common-mode input voltage range includes ground; can operate from V- (GND) up to (VCC - 1.5 V).
4 VEE/GND power_in Negative supply / ground pin. In single-supply operation, connect to 0 V (GND). Split supply operation is also supported.
5 IN B+ input Non-inverting input of comparator B. Common-mode input voltage range includes ground; can operate from V- (GND) up to (VCC - 1.5 V).
6 IN B- input Inverting input of comparator B. Common-mode input voltage range includes ground; can operate from V- (GND) up to (VCC - 1.5 V).
7 OUTB output Open-collector output of comparator B. Requires an external pull-up resistor to a positive supply (typically 3-30 V). Sinks current when the inverting input is above the non-inverting input.
8 VCC power_in Positive supply pin. Single-supply operation from 2 V to 36 V, or split-supply operation ±1 V to ±18 V. Low supply current (~0.4 mA typical) largely independent of supply voltage.

Key specifications

Parameter Value
Manufacturer onsemi
Package MSOP-8
Category Op-amp/Cmp
Pins 8

Ordering variants

Same part, different packaging or reel option.

  • LM2903DMR2GDR2G
  • LM2903DMR2G
  • LM2903DMR2GDG

CAD (KiCad official)

  • Symbol: LM2903DMR2G
  • Footprint: Package_SO:MSOP-8_3x3mm_P0.65mm
  • 3D model: MSOP-8 (KiCad packages3D, STEP)
  • 3D model files: lm2903dmr2g-etched.step / lm2903dmr2g-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); lm2903dmr2g.step / lm2903dmr2g.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: onsemi datasheet (10 pp, sha256 293e6e997d83df83, retrieved 2026-08-17, tier: manufacturer)
  • Extractor: ds2sf (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF