3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownLM2903BQDGKRQ1
Texas Instruments · Comparators · VSSOP-8
LM2903BQDGKRQ1 from Texas Instruments, in a VSSOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | 1OUT | output | Output of comparator 1; open-drain NPN output capable of sinking up to 25mA. |
| 2 | 1IN- | input | Inverting input of comparator 1; accepts input voltage from -0.1V to (VCC-2V). |
| 3 | 1IN+ | input | Non-inverting input of comparator 1; accepts input voltage from -0.1V to (VCC-2V). |
| 4 | GND | power_in | Ground; common reference for power supply and signal return. |
| 5 | 2IN+ | input | Non-inverting input of comparator 2; accepts input voltage from -0.1V to (VCC-2V). |
| 6 | 2IN- | input | Inverting input of comparator 2; accepts input voltage from -0.1V to (VCC-2V). |
| 7 | 2OUT | output | Output of comparator 2; open-drain NPN output capable of sinking up to 25mA. |
| 8 | VCC | power_in | Positive supply voltage; operating range 2V to 36V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | VSSOP-8 |
| Category | Amplifiers/Comparators |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage | VS | -0.3 | 38 | V | 4 | ||
| Differential input voltage | VID | -38 | 38 | V | 4 | ||
| Input pins voltage (IN+, IN–) | -0.3 | 38 | V | 4 | |||
| Output pin voltage (OUT) | -0.3 | 38 | V | 4 | |||
| Current into input pins (IN+, IN–) | -50 | mA | 4 | ||||
| Output sink current | 25 | mA | 4 | ||||
| Operating virtual-junction temperature | 150 | °C | 4 | ||||
| Storage temperature range | Tstg | -65 | 150 | °C | 4 | ||
| Electrostatic discharge, human body model (HBM) | V(ESD) | -2000 | 2000 | V | AEC Q100-002 HBM | 4 | |
| Electrostatic discharge, charged device model (CDM) | V(ESD) | -1000 | 1000 | V | AEC Q100-011, all pins | 4 | |
| Supply voltage | VS | 2 | 36 | V | 5 | ||
| Ambient temperature, LM2903B | TA | -40 | 125 | °C | 5 | ||
| Input voltage range | VIVR | -0.1 | V | 5 | |||
| Input offset voltage, DGK package only (25°C) | VIO | -3.5 | 0.37 | 3.5 | mV | VS = 5 to 36V | 6 |
| Input offset voltage, DGK package only (over temperature) | VIO | -5 | 5 | mV | VS = 5 to 36V, TA = –40°C to +125°C | 6 | |
| Input bias current | IB | -25 | -3.5 | nA | 6 | ||
| Input bias current (over temperature) | IB | -50 | nA | TA = –40°C to +125°C | 6 | ||
| Input offset current | IOS | -10 | 0.5 | 10 | nA | 6 | |
| Input offset current (over temperature) | IOS | -25 | 25 | nA | TA = –40°C to +125°C | 6 | |
| Large signal differential voltage amplification | AVD | 50 | 200 | V/mV | VS = 15V, VO = 1.4V to 11.4V; RL ≥ 15k to (V+) | 6 | |
| Low level output voltage (swing from (V–)) | VOL | 110 | 400 | mV | ISINK ≤ 4mA, VID = -1V | 6 | |
| Low level output voltage (over temperature) | VOL | 550 | mV | ISINK ≤ 4mA, VID = -1V; TA = –40°C to +125°C | 6 | ||
| High-level output leakage current | IOH-LKG | 0.1 | 20 | nA | (V+) = VO = 5V; VID = 1V | 6 | |
| High-level output leakage current | IOH-LKG | 0.3 | 50 | nA | (V+) = VO = 36V; VID = 1V | 6 | |
| Low level output current | IOL | 6 | 21 | mA | VOL = 1.5V; VID = -1V; VS = 5V | 6 | |
| Quiescent current (all comparators) | IQ | 400 | 600 | µA | VS = 5V, no load | 6 | |
| Quiescent current (all comparators, over temperature) | IQ | 550 | 800 | µA | VS = 36V, no load, TA = –40°C to +125°C | 6 | |
| Propagation delay time, high-to-low, TTL input signal | tresponse | 300 | ns | TTL input with Vref = 1.4V | 6 | ||
| Propagation delay time, high-to-low, small scale input signal | tresponse | 1000 | ns | Input overdrive = 5mV, Input step = 100mV | 6 | ||
| Junction-to-ambient thermal resistance (DGK, VSSOP) | RθJA | 176.5 | °C/W | 5 | |||
| Junction-to-case (top) thermal resistance (DGK, VSSOP) | RθJC(top) | 85.5 | °C/W | 5 | |||
| Junction-to-board thermal resistance (DGK, VSSOP) | RθJB | 112.4 | °C/W | 5 | |||
| Junction-to-top characterization parameter (DGK, VSSOP) | ψJT | 17.3 | °C/W | 5 | |||
| Junction-to-board characterization parameter (DGK, VSSOP) | ψJB | 110.1 | °C/W | 5 |
CAD (KiCad official)
- Symbol:
LM2903BQDGKRQ1 - Footprint:
Package_SO:VSSOP-8_2.3x2mm_P0.5mm - 3D model: VSSOP-8 (KiCad packages3D, STEP)
- 3D model files:
lm2903bqdgkrq1-etched.step/lm2903bqdgkrq1-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);lm2903bqdgkrq1.step/lm2903bqdgkrq1.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (47 pp, sha256
765b5f97d419335c, retrieved 2026-09-24, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.2, primaryclaude-haiku-4-5-20251001(text), consensusclaude-sonnet-4-6(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).