main
History Download
Ray lm2902ypt: laser-etched CAD + chip hero (factory 2.0.0 backfill) 6547131

LM2902YPT

STMicroelectronics · Operational Amplifier · TSSOP-14

LM2902YPT from STMicroelectronics, in a TSSOP-14. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 OUT1 output Output of op-amp 1. Push-pull output stage capable of sinking/sourcing current; short-circuit protected with approximately 20 mA output current limit to VCC+.
2 IN1- input Inverting input of op-amp 1. Input voltage range -0.3 V to 32 V; input bias current typically 20 nA.
3 IN1+ input Non-inverting input of op-amp 1. Common-mode input range includes the negative rail (ground); input bias current typically 20 nA.
4 VCC+ power_in Positive supply pin. Single-supply range 3 V to 30 V, or +1.5 V to +15 V in dual-supply operation. Total supply current is approximately 1.5 mA (375 µA per amplifier).
5 IN2+ input Non-inverting input of op-amp 2. Common-mode input range includes the negative rail (ground).
6 IN2- input Inverting input of op-amp 2.
7 OUT2 output Output of op-amp 2. Push-pull, short-circuit protected to VCC+.
8 OUT3 output Output of op-amp 3. Push-pull, short-circuit protected to VCC+.
9 IN3- input Inverting input of op-amp 3.
10 IN3+ input Non-inverting input of op-amp 3. Common-mode input range includes the negative rail (ground).
11 VCC- power_in Negative supply / ground pin. Tied to GND for single-supply operation, or -1.5 V to -15 V in dual-supply operation.
12 IN4+ input Non-inverting input of op-amp 4. Common-mode input range includes the negative rail (ground).
13 IN4- input Inverting input of op-amp 4.
14 OUT4 output Output of op-amp 4. Push-pull, short-circuit protected to VCC+.

Key specifications

Parameter Value
Manufacturer STMicroelectronics
Package TSSOP-14
Category Op-amp/Cmp
Pins 14

Ordering variants

Same part, different packaging or reel option.

  • LM2902YPT
  • LM2902YPTD
  • LM2902YPTDT
  • LM2902YPTYDT
  • LM2902YPTQ4T

CAD (KiCad official)

  • Symbol: LM2902YPT
  • Footprint: Package_SO:TSSOP-14_4.4x5mm_P0.65mm
  • 3D model: TSSOP-14 (KiCad packages3D, STEP)
  • 3D model files: lm2902ypt-etched.step / lm2902ypt-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); lm2902ypt.step / lm2902ypt.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: STMicroelectronics datasheet (21 pp, sha256 16bd5247548a2b49, retrieved 2026-08-17, tier: manufacturer)
  • Extractor: ds2sf (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF