component
LM2902QT14-13
Public Made by Adomby adom
Diodes Incorporated Operational Amplifier, TSSOP-14. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
main
123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241242243244245246247248249250251252253254255256257258259260261262263264265266267268269270271272273274275276277278279
{
"slug": "lm2902qt14-13",
"version": "0.1.0",
"type": "component",
"description": "Diodes Incorporated Operational Amplifier, TSSOP-14. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
"tags": [
"component",
"operational amplifier-comparator",
"lm2902qt14-13",
"factory-2.0.0",
"extractor-text"
],
"dependencies": {},
"hero": {
"type": "image",
"path": "docs/hero.png"
},
"files": [
"page.json",
"README.md",
"lm2902qt14-13.kicad_sym",
"lm2902qt14-13.kicad_mod",
"lm2902qt14-13.glb",
"lm2902qt14-13.step",
"lm2902qt14-13.lbr",
"docs/hero.png",
"docs/lm2902qt14-13-datasheet.pdf",
"viewers/symbol.html",
"viewers/footprint.html",
"lm2902qt14-13-hero.glb",
"lm2902qt14-13-hero.overlay.json",
"lm2902qt14-13-etched.glb"
],
"component": {
"mpn": "LM2902QT14-13",
"manufacturer": "Diodes Incorporated",
"package": "TSSOP-14",
"pin_count": 14,
"category": "Operational Amplifier/Comparator",
"subcategory": "Operational Amplifier",
"datasheet": "https://www.diodes.com/assets/Datasheets/LM2902QT14-13.pdf",
"parts": {
"symbol": "lm2902qt14-13.kicad_sym",
"footprint": "lm2902qt14-13.kicad_mod",
"model_3d": "lm2902qt14-13-hero.glb",
"model_3d_plain": "lm2902qt14-13-etched.glb",
"model_3d_step": "lm2902qt14-13-etched.step",
"model_3d_step_plain": "lm2902qt14-13.step",
"lbr": "lm2902qt14-13.lbr"
},
"distributor_links": {
"lcsc": "C2059020",
"digikey": "31-LM2902QT14-13TR-ND",
"mouser": "621-LM2902QT14-13"
},
"distributor_check": {
"checked_at": "2026-11-05T18:47:55Z",
"source": "Component Ocean /api/assign-pns",
"digikey": {
"pn": "31-LM2902QT14-13TR-ND",
"status": "found",
"lifecycle": "Active"
},
"mouser": {
"pn": "621-LM2902QT14-13",
"status": "found"
}
},
"pins": [
{
"number": "1",
"name": "1OUT",
"type": "output",
"description": "Channel 1 output; short circuits to ground or to VCC must be of short duration because excessive chip dissipation can destroy the device."
},
{
"number": "2",
"name": "1IN-",
"type": "input",
"description": "Channel 1 inverting input; the input common-mode range is 0 V to VCC-1.5 V at +25°C (VCC-2.0 V over full temperature), and either input can go to +36 V without damage."
},
{
"number": "3",
"name": "1IN+",
"type": "input",
"description": "Channel 1 non-inverting input; the input common-mode range is 0 V to VCC-1.5 V at +25°C (VCC-2.0 V over full temperature), and either input can go to +36 V without damage."
},
{
"number": "4",
"name": "VCC",
"type": "power_in",
"description": "Chip supply voltage; the Recommended Operating Conditions give a single supply of 2 V to 36 V or a dual supply of ±1 V to ±18 V."
},
{
"number": "5",
"name": "2IN+",
"type": "input",
"description": "Channel 2 non-inverting input; the input common-mode range is 0 V to VCC-1.5 V at +25°C (VCC-2.0 V over full temperature), and either input can go to +36 V without damage."
},
{
"number": "6",
"name": "2IN-",
"type": "input",
"description": "Channel 2 inverting input; the input common-mode range is 0 V to VCC-1.5 V at +25°C (VCC-2.0 V over full temperature), and either input can go to +36 V without damage."
},
{
"number": "7",
"name": "2OUT",
"type": "output",
"description": "Channel 2 output; short circuits to ground or to VCC must be of short duration because excessive chip dissipation can destroy the device."
},
{
"number": "8",
"name": "3OUT",
"type": "output",
"description": "Channel 3 output; short circuits to ground or to VCC must be of short duration because excessive chip dissipation can destroy the device."
},
{
"number": "9",
"name": "3IN-",
"type": "input",
"description": "Channel 3 inverting input; the input common-mode range is 0 V to VCC-1.5 V at +25°C (VCC-2.0 V over full temperature), and either input can go to +36 V without damage."
},
{
"number": "10",
"name": "3IN+",
"type": "input",
"description": "Channel 3 non-inverting input; the input common-mode range is 0 V to VCC-1.5 V at +25°C (VCC-2.0 V over full temperature), and either input can go to +36 V without damage."
},
{
"number": "11",
"name": "GND",
"type": "power_in",
"description": "Ground; for single-supply operation a minimum 0.1 µF bypass capacitor should be placed as close as possible between VCC and GND."
},
{
"number": "12",
"name": "4IN+",
"type": "input",
"description": "Channel 4 non-inverting input; the input common-mode range is 0 V to VCC-1.5 V at +25°C (VCC-2.0 V over full temperature), and either input can go to +36 V without damage."
},
{
"number": "13",
"name": "4IN-",
"type": "input",
"description": "Channel 4 inverting input; the input common-mode range is 0 V to VCC-1.5 V at +25°C (VCC-2.0 V over full temperature), and either input can go to +36 V without damage."
},
{
"number": "14",
"name": "4OUT",
"type": "output",
"description": "Channel 4 output; short circuits to ground or to VCC must be of short duration because excessive chip dissipation can destroy the device."
}
],
"provenance": {
"extractor": "extract_pins 0.3",
"factory_chain": {
"factory": "2.0.0",
"extractor": "extract_pins 0.3",
"primary_model": "claude-haiku-5-5",
"primary_mode": "text",
"consensus_model": "claude-sonnet-5-5",
"consensus": "agreed",
"guards": "pin_guards 0.1: passed",
"guard_notes": [
"extractor flagged: The part LM2902QT14-13 is the quad LM2902Q in TSSOP-14 (Ordering Information, page 13), so the LM290; The pin-number-to-name mapping was taken from the Pin Descriptions table on page 2. The Pin Assignme; The datasheet gives only functional descriptions per pin, not per-pin electrical limits. The limits "
],
"pages_sent": 20,
"cost_usd": 0.0875,
"at": "2026-11-05T18:47:30"
},
"datasheet": {
"url": "https://www.diodes.com/assets/Datasheets/LM2902QT14-13.pdf",
"pages": 20,
"sha256": "12a3965c03721356",
"source_tier": "mfr"
},
"cad": "KiCad official (CC-BY-SA 4.0)",
"pins": {
"total": 14,
"described": 14,
"cites_pages": true,
"refuses_to_fabricate": true
}
},
"viewers": {
"symbol": "viewers/symbol.html",
"footprint": "viewers/footprint.html"
},
"models_3d": [
{
"file": "lm2902qt14-13.step",
"role": "plain",
"up": "Z",
"units": "mm",
"origin": "footprint origin = pad-pattern centre",
"seat": "z = 0",
"extents_mm": [
6.4,
5.0,
1.0
],
"zmin_mm": -0.0,
"centre_offset_mm": 0.0,
"footprint_binding": "identity",
"sha256": "3ee5786aae56190997aa793ba3cfc003fd616782770e29719b4562f012982245",
"checked": "2026-11-05",
"checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
},
{
"file": "lm2902qt14-13-etched.step",
"role": "eda",
"up": "Z",
"units": "mm",
"origin": "footprint origin = pad-pattern centre",
"seat": "z = 0",
"extents_mm": [
6.4,
5.0,
1.0
],
"zmin_mm": -0.0,
"centre_offset_mm": 0.0,
"footprint_binding": "identity",
"sha256": "0f63b2818b3a23d0c5151c4cb38919292b30eb3e6ae72913c0c3be6e6991c320",
"checked": "2026-11-05",
"checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
}
],
"package_dims": {
"package_code": "T14",
"source_page": 16,
"D": {
"nom_mm": 5.0,
"range_mm": [
4.9,
5.1
]
},
"E1": {
"nom_mm": 4.4,
"range_mm": [
4.3,
4.5
]
},
"E": {
"nom_mm": 6.4,
"range_mm": [
null,
null
]
},
"e": {
"nom_mm": 0.65,
"range_mm": [
null,
null
]
},
"A": {
"nom_mm": 1.2,
"range_mm": [
null,
1.2
]
},
"source": "datasheet package drawing, every number found on its page (extract_pins --task dims)",
"model_check": {
"file": "lm2902qt14-13.step",
"verdict": "PASS",
"reasons": [
"height and body within the datasheet's package drawing"
],
"by": "factory/package_fit.py"
}
}
}
}