Loads when you scroll to it. Unloads after 5 minutes in the background.
Contents

README

markdown

LM2901YDT

STMicroelectronics · Comparators · SOIC-14

LM2901YDT from STMicroelectronics, in a SOIC-14. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 OUT2 output Open-collector output of comparator 2. Requires an external pull-up resistor to a positive supply (typ. 3 kΩ to 100 kΩ). Sinks up to 16 mA when active low; V_OL ≤ 250 mV at 4 mA sink.
2 OUT1 output Open-collector output of comparator 1. Requires an external pull-up resistor to a positive supply. Sinks up to 16 mA when active low.
3 VCC+ power_in Positive supply voltage. Single-supply operation from 2 V to 36 V (LM2901Y max 36 V), or split-supply ±1 V to ±18 V. Quiescent current typ. 0.8 mA (all four comparators, no load).
4 IN1- input Inverting input of comparator 1. Input common-mode range extends from V- (or GND in single-supply) up to V+ - 1.5 V. Input bias current typ. 25 nA.
5 IN1+ input Non-inverting input of comparator 1. Input common-mode range extends from V- (or GND) up to V+ - 1.5 V. Input offset voltage typ. ±2 mV (max ±7 mV).
6 IN2- input Inverting input of comparator 2. Input common-mode range extends from V- (or GND) up to V+ - 1.5 V.
7 IN2+ input Non-inverting input of comparator 2. Input common-mode range extends from V- (or GND) up to V+ - 1.5 V.
8 IN3+ input Non-inverting input of comparator 3. Input common-mode range extends from V- (or GND) up to V+ - 1.5 V.
9 IN3- input Inverting input of comparator 3. Input common-mode range extends from V- (or GND) up to V+ - 1.5 V.
10 IN4+ input Non-inverting input of comparator 4. Input common-mode range extends from V- (or GND) up to V+ - 1.5 V.
11 IN4- input Inverting input of comparator 4. Input common-mode range extends from V- (or GND) up to V+ - 1.5 V.
12 OUT4 output Open-collector output of comparator 4. Requires an external pull-up resistor to a positive supply. Sinks up to 16 mA when active low.
13 OUT3 output Open-collector output of comparator 3. Requires an external pull-up resistor to a positive supply. Sinks up to 16 mA when active low.
14 GND power_in Ground / negative supply (V-). Connect to 0 V for single-supply operation, or to the negative rail for split-supply operation (down to -18 V relative to V+).

Key specifications

Parameter Value
Manufacturer STMicroelectronics
Package SOIC-14
Category Op-amp/Cmp
Pins 14

Ordering variants

  • LM2901YDT
  • LM2901YDTYN
  • LM2901YDTYPT

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Input offset voltage Vio 1 7 mV Tamb = 25 °C, VCC+ = 5 V unless otherwise specified; at output switch point VO ≈ 1.4 V, RS = 0 4
Input offset voltage Vio 15 mV Tmin ≤ Tamb ≤ Tmax; VCC+ = 5 V unless otherwise specified 4
Input offset current Iio 5 50 nA Tamb = 25 °C, VCC+ = 5 V unless otherwise specified 4
Input offset current Iio 150 nA Tmin ≤ Tamb ≤ Tmax 4
Input bias current (II+ or II-) Iib 25 250 nA Tamb = 25 °C, VCC+ = 5 V unless otherwise specified 4
Input bias current (II+ or II-) Iib 400 nA Tmin ≤ Tamb ≤ Tmax 4
Large signal voltage gain Avd 25 200 V/mV VCC = 15 V, RL = 15 kΩ, Vo = 1 to 11 V 4
Supply current (all comparators) ICC 1.1 2 mA VCC = +5 V, no load 4
Supply current (all comparators) ICC 1.3 2.5 mA VCC = +30 V, no load 4
Low level output voltage VOL 250 400 mV Vid = -1 V, Isink = 4 mA, Tamb = 25 °C 4
Low level output voltage VOL 700 mV Vid = -1 V, Isink = 4 mA, Tmin ≤ Tamb ≤ Tmax 4
High level output current IOH 0.1 nA VCC = Vo = 30 V, Vid = 1 V, Tamb = 25 °C 4
High level output current IOH 1 µA VCC = Vo = 30 V, Vid = 1 V, Tmin ≤ Tamb ≤ Tmax 4
Output sink current Isink 6 16 mA Vid = -1 V, Vo = 1.5 V 4
Large signal response time (output at 50% of final value) trel 500 ns TTL input (Vref = +1.4 V, RL = 5.1 kΩ to VCC+); output signal at 50% of final value; maximum guaranteed by design 4
Large signal response time (output at 95% of final value) trel 1 µs TTL input (Vref = +1.4 V, RL = 5.1 kΩ to VCC+); output signal at 95% of final value; maximum guaranteed by design 4
Supply voltage (single supply) VCC 2 32 V Single supply 3
Supply voltage (dual supplies) VCC 1 16 V Dual supplies; printed as ±1 to ±16 V 3
Common mode input voltage range (lower limit) Vicm 0 V Tmin ≤ Tamb ≤ Tmax; upper limit printed as (VCC+ −1.5) V 3
Operating free-air temperature range Toper -40 125 °C 3
Supply voltage VCC -18 36 V Printed as ±18 to 36 V 3
Differential input voltage Vid -36 36 V Printed as ±36 V 3
Input voltage Vin -0.3 36 V 3
Maximum junction temperature Tj 150 °C 3
Storage temperature range Tstg -65 150 °C 3
ESD human body model (HBM) ESD HBM 500 V 100 pF through 1.5 kΩ, per datasheet footnote 3 3
ESD machine model (MM) ESD MM 100 V 200 pF, no series resistor, per datasheet footnote 4 3
ESD charged device model (CDM) ESD CDM 1500 V All pins charged, discharged through one pin, per datasheet footnote 5 3
Thermal resistance junction to ambient (SO-14) Rthja 105 °C/W SO-14 package; values are typical 3
Thermal resistance junction to case (SO-14) Rthjc 31 °C/W SO-14 package; values are typical 3

CAD (KiCad official)

  • Symbol: LM2901YDT
  • Footprint: Package_SO:SOIC-14_3.9x8.7mm_P1.27mm
  • 3D model: SOIC-14 (KiCad packages3D, STEP)
  • 3D model files: lm2901ydt-etched.step / lm2901ydt-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); lm2901ydt.step / lm2901ydt.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: STMicroelectronics datasheet (None pp, sha256 43565e6eb9a8b5be, retrieved 2026-08-17, tier: manufacturer)
  • Extractor: ds2sf (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF