Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

LM2901QPWRG4Q1

Texas Instruments · Comparators · TSSOP-14

LM2901QPWRG4Q1 from Texas Instruments, in a TSSOP-14. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 OUT1 output Open-drain output pin of comparator 2 (named OUT1 in the table); recommended output current is 0 to 4 mA per comparator.
2 OUT2 output Open-drain output pin of comparator 1 (named OUT2 in the table); recommended output current is 0 to 4 mA per comparator.
3 VCC power_in Positive supply pin; LM2901-Q1 supply voltage is 2 V to 30 V per the recommended operating conditions.
4 IN2- input Negative input pin of comparator 1 (named IN2- in the table); input common-mode range is 0 V to VCC - 2 V over the full temperature range.
5 IN2+ input Positive input pin of comparator 1 (named IN2+ in the table); input common-mode range is 0 V to VCC - 2 V over the full temperature range.
6 IN1- input Negative input pin of comparator 2 (named IN1- in the table); input common-mode range is 0 V to VCC - 2 V over the full temperature range.
7 IN1+ input Positive input pin of comparator 2 (named IN1+ in the table); input common-mode range is 0 V to VCC - 2 V over the full temperature range.
8 IN3- input Negative input pin of comparator 3; input common-mode range is 0 V to VCC - 2 V over the full temperature range.
9 IN3+ input Positive input pin of comparator 3; input common-mode range is 0 V to VCC - 2 V over the full temperature range.
10 IN4- input Negative input pin of comparator 4; input common-mode range is 0 V to VCC - 2 V over the full temperature range.
11 IN4+ input Positive input pin of comparator 4; input common-mode range is 0 V to VCC - 2 V over the full temperature range.
12 GND power_in Negative supply pin; per the layout guidance, do not place a bypass capacitor between GND and system ground if no negative supply is used.
13 OUT4 output Open-drain output pin of comparator 4; recommended output current is 0 to 4 mA per comparator.
14 OUT3 output Open-drain output pin of comparator 3; recommended output current is 0 to 4 mA per comparator.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package TSSOP-14
Category Amplifiers/Comparators
Pins 14

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Supply voltage, LM2901-Q1 (non-V) VCC 2 30 V LM2901-Q1 (non-V, non-A devices) 6
Ambient temperature TA -40 125 °C 6
Output current (per comparator) IO 0 4 mA per comparator 6
Supply voltage, VCC VCC 36 V 5
Differential input voltage VID -36 36 V IN+ with respect to IN− 5
Input voltage range (either input) VI -0.3 36 V either input 5
Output voltage VO 36 V 5
Output current IO 20 mA 5
Operating virtual junction temperature TJ 150 °C 5
Storage temperature Tstg -65 150 °C 5
Input offset voltage (25°C) VIO 2 7 mV TA = 25°C; VIC = VICR(min), VO = 1.4V, VCC = 5V to MAX(3) 8
Input offset voltage (full range) VIO 15 mV TA = Full range (−40°C to 125°C); VIC = VICR(min), VO = 1.4V, VCC = 5V to MAX(3) 8
Input offset current (25°C) IIO 5 50 nA TA = 25°C; VO = 1.4V 8
Input offset current (full range) IIO 200 nA TA = Full range (−40°C to 125°C); VO = 1.4V 8
Input bias current (25°C) IIB -25 -250 nA TA = 25°C; VO = 1.4V 8
Input bias current (full range) IIB -500 nA TA = Full range (−40°C to 125°C); VO = 1.4V 8
Common-mode input voltage range (25°C) VICR 0 V TA = 25°C 8
Common-mode input voltage range (full range) VICR 0 V TA = Full range (−40°C to 125°C) 8
Large-signal differential voltage amplification AVD 25 100 V/mV TA = 25°C; VCC = 15V, VO = 1.4V to 11.4V, RL ≥ 15kΩ to VCC 8
High-level output current (25°C) IOH 0.1 50 nA TA = 25°C; VID = 1V, VOH = 5V 8
High-level output current (VOH = VCC MAX) IOH 1 μA Full range; VID = 1V, VOH = VCC MAX(3) 8
Low-level output voltage (25°C) VOL 150 400 mV TA = 25°C; VID = -1V, IOL = 4mA 8
Low-level output voltage (full range) VOL 700 mV TA = Full range (−40°C to 125°C); VID = -1V, IOL = 4mA 8
Low-level output current IOL 6 16 mA TA = 25°C; VID = -1V, VOL = 1.5V 8
Supply current (four comparators), VCC = 5V ICC 0.8 2 mA TA = 25°C; VO = 2.5V, no load, VCC = 5V 8
Supply current (four comparators), VCC = MAX ICC 1 2.5 mA TA = 25°C; VO = 2.5V, no load, VCC = MAX(3) 8
Junction-to-ambient thermal resistance (PW, TSSOP-14) RθJA 136.6 °C/W PW (TSSOP) 14-pin package 6
Junction-to-case (top) thermal resistance (PW, TSSOP-14) RθJC(top) 66.6 °C/W PW (TSSOP) 14-pin package 6
Junction-to-board thermal resistance (PW, TSSOP-14) RθJB 79.8 °C/W PW (TSSOP) 14-pin package 6
Junction-to-top characterization parameter (PW, TSSOP-14) ψJT 17.8 °C/W PW (TSSOP) 14-pin package 6
Junction-to-board characterization parameter (PW, TSSOP-14) ψJB 79.3 °C/W PW (TSSOP) 14-pin package 6

CAD (KiCad official)

  • Symbol: LM2901QPWRG4Q1
  • Footprint: Package_SO:TSSOP-14_4.4x5mm_P0.65mm
  • 3D model: TSSOP-14 (KiCad packages3D, STEP)
  • 3D model files: lm2901qpwrg4q1-etched.step / lm2901qpwrg4q1-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); lm2901qpwrg4q1.step / lm2901qpwrg4q1.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (36 pp, sha256 d8a6db751188e102, retrieved 2026-11-11, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF