Generated by kicad-footprint-generator · KiCad file format 20260206
LM2901NSR
Texas Instruments · Comparators · SO-14-208mil
LM2901NSR from Texas Instruments, in a SO-14-208mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | OUT1 | output | Output pin of comparator 2 (channel naming per Table 5-1 footnote); it is an open-collector-type output compatible with TTL, MOS, and CMOS levels. |
| 2 | OUT2 | output | Output pin of comparator 1 (channel naming per Table 5-1 footnote); it is an open-collector-type output compatible with TTL, MOS, and CMOS levels. |
| 3 | VCC | power_in | Positive supply pin; the device operates from a single supply with a range of 2 V to 36 V for the LM2901B version. |
| 4 | IN2- | input | Negative input pin of comparator 1 (channel naming per Table 5-1 footnote). |
| 5 | IN2+ | input | Positive input pin of comparator 1 (channel naming per Table 5-1 footnote). |
| 6 | IN1- | input | Negative input pin of comparator 2 (channel naming per Table 5-1 footnote); input current is limited to −50 mA in absolute maximum ratings. |
| 7 | IN1+ | input | Positive input pin of comparator 2 (channel naming per Table 5-1 footnote); common-mode input range includes ground. |
| 8 | IN3- | input | Negative input pin of comparator 3; input current is limited to −50 mA in absolute maximum ratings. |
| 9 | IN3+ | input | Positive input pin of comparator 3; common-mode input range includes ground. |
| 10 | IN4- | input | Negative input pin of comparator 4; input current is limited to −50 mA in absolute maximum ratings. |
| 11 | IN4+ | input | Positive input pin of comparator 4; common-mode input range includes ground. |
| 12 | GND | power_in | Negative supply pin (ground); the common-mode input range includes this ground. |
| 13 | OUT4 | output | Output pin of comparator 4; output sink current is limited to 25 mA for the B-version. |
| 14 | OUT3 | output | Output pin of comparator 3; output sink current is limited to 25 mA for the B-version. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SO-14-208mil |
| Category | Amplifiers |
| Pins | 14 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input offset voltage | VIO | 2 | 7 | mV | VIC = VICR min, VO = 1.4V, VCC = 5V to MAX, Non-A devices, 25°C | 11 | |
| Input offset voltage (full range) | VIO | 15 | mV | VIC = VICR min, VO = 1.4V, VCC = 5V to MAX, Non-A devices, full range -40°C to +125°C | 11 | ||
| Input offset current | IIO | 5 | 50 | nA | VO = 1.4V, 25°C | 11 | |
| Input offset current (full range) | IIO | 200 | nA | VO = 1.4V, full range -40°C to +125°C | 11 | ||
| Input bias current | IIB | -25 | -250 | nA | VO = 1.4V, 25°C | 11 | |
| Input bias current (full range) | IIB | -500 | nA | VO = 1.4V, full range -40°C to +125°C | 11 | ||
| Common-mode input voltage range | VICR | 0 | V | 25°C; upper limit printed as VCC, 1.5 V | 11 | ||
| Common-mode input voltage range (full range) | VICR | 0 | V | full range -40°C to +125°C; upper limit printed as VCC, 2 V | 11 | ||
| Large-signal differential voltage amplification | AVD | 25 | 100 | V/mV | VCC = 15V, VO = 1.4V to 11.4V, RL ≥ 15kΩ to VCC, 25°C | 11 | |
| High-level output current | IOH | 0.1 | 50 | nA | VID = 1V, VOH = 5V, 25°C | 11 | |
| High-level output current (full range) | IOH | 1 | µA | VID = 1V, VOH = VCC MAX, full range | 11 | ||
| Low-level output voltage (non-V devices) | VOL | 150 | 500 | mV | VID = -1V, IOL = 4mA, Non-V devices, 25°C | 11 | |
| Low-level output voltage (full range) | VOL | 700 | mV | VID = -1V, IOL = 4mA, all devices, full range | 11 | ||
| Low-level output current | IOL | 6 | 16 | mA | VID = -1V, VOL = 1.5V, 25°C | 11 | |
| Supply current (four comparators) | ICC | 0.8 | 2 | mA | VO = 2.5V, no load, VCC = 5V, 25°C | 11 | |
| Supply current (four comparators) | ICC | 1 | 2.5 | mA | VO = 2.5V, no load, VCC = MAX (30V non-V), 25°C | 11 | |
| Supply voltage | VCC | 2 | 30 | V | Non-V devices | 6 | |
| Junction temperature (LM2901x) | TJ | -40 | 125 | °C | LM2901x | 6 | |
| Supply voltage | VCC | 36 | V | Non-B versions, all voltages with respect to network ground | 5 | ||
| Differential input voltage | VID | -36 | 36 | V | Non-B versions | 5 | |
| Input voltage range (either input) | VI | -0.3 | 36 | V | Non-B versions | 5 | |
| Input current | IK | -50 | mA | Non-B versions | 5 | ||
| Output voltage | VO | 36 | V | Non-B versions | 5 | ||
| Output current | IO | 20 | mA | Non-B versions | 5 | ||
| Operating virtual-junction temperature | TJ | 150 | °C | Non-B versions | 5 | ||
| Storage temperature | Tstg | -65 | 150 | °C | Non-B versions | 5 | |
| Junction-to-ambient thermal resistance | RθJA | 96.2 | °C/W | NS (SOP) 14 pins | 6 | ||
| Junction-to-case (top) thermal resistance | RθJC(top) | 56.1 | °C/W | NS (SOP) 14 pins | 6 | ||
| Junction-to-board thermal resistance | RθJB | 56.9 | °C/W | NS (SOP) 14 pins | 6 | ||
| Junction-to-top characterization parameter | ψJT | 24.8 | °C/W | NS (SOP) 14 pins | 6 | ||
| Junction-to-board characterization parameter | ψJB | 56.4 | °C/W | NS (SOP) 14 pins | 6 |
CAD (KiCad official)
- Symbol:
LM2901NSR - Footprint:
Package_SO:SO-14_5.3x10.2mm_P1.27mm - 3D model: SO-14-208mil (KiCad packages3D, STEP)
- 3D model files:
lm2901nsr-etched.step/lm2901nsr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);lm2901nsr.step/lm2901nsr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (54 pp, sha256
c5de1ee3abfe2422, retrieved 2026-11-20) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).