LM2853MHX-2.5

{
  "slug": "lm2853mhx-2-5",
  "version": "0.1.0",
  "type": "component",
  "description": "Texas Instruments DC-DC Converters, HTSSOP-14-EP. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "power supply chip",
    "lm2853mhx-2.5",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "lm2853mhx-2-5.kicad_sym",
    "lm2853mhx-2-5.kicad_mod",
    "lm2853mhx-2-5.glb",
    "lm2853mhx-2-5.step",
    "lm2853mhx-2-5.lbr",
    "docs/hero.png",
    "docs/lm2853mhx-2-5-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "lm2853mhx-2-5-hero.glb",
    "lm2853mhx-2-5-hero.overlay.json"
  ],
  "component": {
    "mpn": "LM2853MHX-2.5",
    "manufacturer": "Texas Instruments",
    "package": "HTSSOP-14-EP",
    "pin_count": 15,
    "category": "Power Supply Chip",
    "subcategory": "DC-DC Converters",
    "datasheet": "https://www.ti.com/cn/lit/gpn/lm2853",
    "parts": {
      "symbol": "lm2853mhx-2-5.kicad_sym",
      "footprint": "lm2853mhx-2-5.kicad_mod",
      "model_3d": "lm2853mhx-2-5-hero.glb",
      "model_3d_plain": "lm2853mhx-2-5.glb",
      "model_3d_step": "lm2853mhx-2-5-etched.step",
      "model_3d_step_plain": "lm2853mhx-2-5.step",
      "lbr": "lm2853mhx-2-5.lbr"
    },
    "distributor_links": {
      "lcsc": "C2072690",
      "digikey": "LM2853MHX-2.5-ND",
      "mouser": "926-LM2853MHX-25"
    },
    "distributor_check": {
      "checked_at": "2026-10-07T02:06:17Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": "LM2853MHX-2.5-ND",
        "status": "found",
        "lifecycle": "Obsolete"
      },
      "mouser": {
        "pn": "926-LM2853MHX-25",
        "status": "found",
        "lifecycle": "Obsolete"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "AVIN",
        "type": "power_in",
        "description": "Input supply voltage for control logic with operating range 3V to 5.5V per recommended operating conditions"
      },
      {
        "number": "2",
        "name": "EN",
        "type": "input",
        "description": "Enable control input; regulator enabled when above 75% of AVIN, disabled when below 25% of AVIN"
      },
      {
        "number": "3",
        "name": "SGND",
        "type": "power_in",
        "description": "Low noise ground reference for control and signal circuitry"
      },
      {
        "number": "4",
        "name": "SS",
        "type": "input",
        "description": "Soft-start control node; connect 1nF to 50nF external capacitor to set startup ramp time"
      },
      {
        "number": "5",
        "name": "NC",
        "type": "unconnected",
        "description": "No internal connection; pin must be tied to ground externally"
      },
      {
        "number": "6",
        "name": "PVIN",
        "type": "power_in",
        "description": "Power supply input for switching stage with operating range 1.5V to 5.5V per recommended operating conditions"
      },
      {
        "number": "7",
        "name": "PVIN",
        "type": "power_in",
        "description": "Power supply input for switching stage with operating range 1.5V to 5.5V per recommended operating conditions"
      },
      {
        "number": "8",
        "name": "SW",
        "type": "output",
        "description": "High-frequency switch node output driven by internal synchronous FETs at 550kHz; connect to output filter inductor"
      },
      {
        "number": "9",
        "name": "SW",
        "type": "output",
        "description": "High-frequency switch node output driven by internal synchronous FETs at 550kHz; connect to output filter inductor"
      },
      {
        "number": "10",
        "name": "PGND",
        "type": "power_in",
        "description": "Power ground for output stage; connect to ground plane for thermal performance and noise reduction"
      },
      {
        "number": "11",
        "name": "PGND",
        "type": "power_in",
        "description": "Power ground for output stage; connect to ground plane for thermal performance and noise reduction"
      },
      {
        "number": "12",
        "name": "NC",
        "type": "unconnected",
        "description": "No internal connection; pin must be tied to ground externally"
      },
      {
        "number": "13",
        "name": "NC",
        "type": "unconnected",
        "description": "No internal connection; pin must be tied to ground externally"
      },
      {
        "number": "14",
        "name": "SNS",
        "type": "input",
        "description": "Output voltage feedback sense input with 432kΩ internal resistance; connect to output voltage divider or capacitor ESR node"
      },
      {
        "number": "15",
        "name": "EP",
        "type": "power_in",
        "description": "Thermal exposed pad internally connected to ground; solder to external ground plane for improved thermal dissipation and regulation performance"
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-haiku-4-5-20251001",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [],
        "pages_sent": 26,
        "cost_usd": 0.1705,
        "at": "2026-10-07T02:06:00"
      },
      "datasheet": {
        "url": "https://www.ti.com/cn/lit/gpn/lm2853",
        "pages": 26,
        "sha256": "2e1d0a460160f6e1",
        "source_tier": "lcsc"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 15,
        "described": 15,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "lm2853mhx-2-5.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          7.35,
          5.0,
          1.05
        ],
        "zmin_mm": 0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "e73930af88609deacee2bde98223bb9da2411f0cebb494015de765f0df216789",
        "checked": "2026-10-07",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "lm2853mhx-2-5-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          7.35,
          5.0,
          1.05
        ],
        "zmin_mm": 0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "a66dc305d8f61140755257f2090fbffba9c52cf71613c623899df21b6d25ac47",
        "checked": "2026-10-07",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  }
}