component
LM2853MH-2.5
Public Made by Adomby adom
Texas Instruments DC-DC Converters, HTSSOP-14-EP. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
Made with KiCad 10.0 · needs KiCad 10.0 or later to open · KiCad file format 20260206
| Name | Last updated |
|---|---|
| docs | 17d ago |
| viewers | 17d ago |
| lm2853mh-2-5-etched.glb | 17d ago |
| lm2853mh-2-5-etched.step | 17d ago |
| lm2853mh-2-5-hero.glb | 17d ago |
| lm2853mh-2-5-hero.overlay.json | 17d ago |
| lm2853mh-2-5.glb | 17d ago |
| lm2853mh-2-5.kicad_mod | 17d ago |
| lm2853mh-2-5.kicad_sym | 17d ago |
| lm2853mh-2-5.lbr | 17d ago |
| lm2853mh-2-5.step | 17d ago |
| package.json | 17d ago |
| page.json | 17d ago |
| README.md | 17d ago |
LM2853MH-2.5
Texas Instruments · DC-DC Converters · HTSSOP-14-EP
LM2853MH-2.5 from Texas Instruments, in a HTSSOP-14-EP. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | AVIN | power_in | Input voltage for the control circuitry; AVIN to GND is recommended at 3 V to 5.5 V, with a small 1 µF ceramic bypass capacitor on this pin. |
| 2 | EN | input | Enable input that is internally pulled up so the device is enabled unless pulled low; the minimum high input is 75% of AVIN and the maximum low input is 25% of AVIN. |
| 3 | SGND | power_in | Low noise ground for the control circuitry; all ground connections must be tied together. |
| 4 | SS | passive | Soft-start pin for the reference voltage; the soft-start capacitor range is restricted to 1 nF to 50 nF. |
| 5 | NC | unconnected | No connect pin; the datasheet states this pin must be tied to ground. |
| 6 | PVIN | power_in | Input voltage for the power circuitry (power FETs); PVIN to GND is recommended at 1.5 V to 5.5 V and must always be equal to or less than AVIN. |
| 7 | PVIN | power_in | Input voltage for the power circuitry (power FETs); PVIN to GND is recommended at 1.5 V to 5.5 V and must always be equal to or less than AVIN. |
| 8 | SW | output | Switch pin connecting the internal power FETs to the output filter inductor; keep the switch node trace short and wide but small in area. |
| 9 | SW | output | Switch pin connecting the internal power FETs to the output filter inductor; keep the switch node trace short and wide but small in area. |
| 10 | PGND | power_in | Power ground for the power stage switching currents. |
| 11 | PGND | power_in | Power ground for the power stage switching currents. |
| 12 | NC | unconnected | No-connect pin; the datasheet states this pin must be tied to ground. |
| 13 | NC | unconnected | No-connect pin; the datasheet states this pin must be tied to ground. |
| 14 | SNS | input | Output voltage sense pin; it should be connected as close to the load as possible and kept away from high dV/dt or dI/dt nodes such as the switch node. |
| 15 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | HTSSOP-14-EP |
| Category | Power Supply Chip |
| Pins | 15 |
CAD (KiCad official)
- Symbol:
LM2853MH-2.5 - Footprint:
Package_SO:TSSOP-14-1EP_4.4x5mm_P0.65mm - 3D model: HTSSOP-14-EP (KiCad packages3D, STEP)
- 3D model files:
lm2853mh-2-5-etched.step/lm2853mh-2-5-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);lm2853mh-2-5.step/lm2853mh-2-5.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (26 pp, sha256
2e1d0a460160f6e1, retrieved 2026-10-08, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).