component
LM2852YMXAX-1.2
Public Made by Adomby adom
Texas Instruments DC-DC Converters, HTSSOP-14-EP. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
main
Ray
Initial commit: component/lm2852ymxax-1-2
2d2d334
LM2852YMXAX-1.2
Texas Instruments · DC-DC Converters · HTSSOP-14-EP
LM2852YMXAX-1.2 from Texas Instruments, in a HTSSOP-14-EP. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | AVIN | power_in | Chip bias input pin that provides power to the logic of the chip; connect to the input voltage or a separate rail. |
| 2 | EN | input | Enable pin internally pulled up; connect to ground to disable or to AVIN or leave floating to enable the chip. |
| 3 | SGND | power_in | Signal ground. |
| 4 | SS | input | Soft-start pin connected to a small capacitor to control startup; soft-start capacitance range restricted to 1 nF to 50 nF. |
| 5 | NC | unconnected | No connect pin; must be tied to ground or left floating in the application. |
| 6 | PVIN | power_in | Input supply pin connected to the input voltage source for the internal power PFET. |
| 7 | PVIN | power_in | Input supply pin connected to the input voltage source for the internal power PFET. |
| 8 | SW | output | Switch pin that connects to the output inductor. |
| 9 | SW | output | Switch pin that connects to the output inductor. |
| 10 | PGND | power_in | Power ground; connect to an internal ground plane or other large ground plane. |
| 11 | PGND | power_in | Power ground; connect to an internal ground plane or other large ground plane. |
| 12 | NC | unconnected | No connect pin; must be tied to ground or left floating in the application. |
| 13 | NC | unconnected | No connect pin; must be tied to ground or left floating in the application. |
| 14 | SNS | output | Output voltage sense pin that must be connected as close to the load as possible to ensure the voltage at the load is the expected regulated value. |
| 15 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | HTSSOP-14-EP |
| Category | Power Management (PMIC) |
| Pins | 15 |
CAD (KiCad official)
- Symbol:
LM2852YMXAX-1.2 - Footprint:
Package_SO:TSSOP-14-1EP_4.4x5mm_P0.65mm - 3D model: HTSSOP-14-EP (KiCad packages3D, STEP)
- 3D model files:
lm2852ymxax-1-2-etched.step/lm2852ymxax-1-2-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);lm2852ymxax-1-2.step/lm2852ymxax-1-2.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (31 pp, sha256
2216cf1c2aebddd4, retrieved 2026-09-23, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.2, primaryclaude-haiku-4-5-20251001(text), consensusclaude-sonnet-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# LM2852YMXAX-1.2
**Texas Instruments** · DC-DC Converters · HTSSOP-14-EP
LM2852YMXAX-1.2 from Texas Instruments, in a HTSSOP-14-EP. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | AVIN | power_in | Chip bias input pin that provides power to the logic of the chip; connect to the input voltage or a separate rail. |
| 2 | EN | input | Enable pin internally pulled up; connect to ground to disable or to AVIN or leave floating to enable the chip. |
| 3 | SGND | power_in | Signal ground. |
| 4 | SS | input | Soft-start pin connected to a small capacitor to control startup; soft-start capacitance range restricted to 1 nF to 50 nF. |
| 5 | NC | unconnected | No connect pin; must be tied to ground or left floating in the application. |
| 6 | PVIN | power_in | Input supply pin connected to the input voltage source for the internal power PFET. |
| 7 | PVIN | power_in | Input supply pin connected to the input voltage source for the internal power PFET. |
| 8 | SW | output | Switch pin that connects to the output inductor. |
| 9 | SW | output | Switch pin that connects to the output inductor. |
| 10 | PGND | power_in | Power ground; connect to an internal ground plane or other large ground plane. |
| 11 | PGND | power_in | Power ground; connect to an internal ground plane or other large ground plane. |
| 12 | NC | unconnected | No connect pin; must be tied to ground or left floating in the application. |
| 13 | NC | unconnected | No connect pin; must be tied to ground or left floating in the application. |
| 14 | SNS | output | Output voltage sense pin that must be connected as close to the load as possible to ensure the voltage at the load is the expected regulated value. |
| 15 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | HTSSOP-14-EP |
| Category | Power Management (PMIC) |
| Pins | 15 |
## CAD (KiCad official)
- Symbol: `LM2852YMXAX-1.2`
- Footprint: `Package_SO:TSSOP-14-1EP_4.4x5mm_P0.65mm`
- 3D model: HTSSOP-14-EP (KiCad packages3D, STEP)
- 3D model files: `lm2852ymxax-1-2-etched.step` / `lm2852ymxax-1-2-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `lm2852ymxax-1-2.step` / `lm2852ymxax-1-2.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/cn/lit/gpn/lm2852) (31 pp, sha256 `2216cf1c2aebddd4`, retrieved 2026-09-23, tier: lcsc)
- **Datasheet language:** Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.2`, primary `claude-haiku-4-5-20251001` (text), consensus `claude-sonnet-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/lm2852ymxax-1-2-datasheet.pdf)