main
Download ZIP Propose a change
Made with KiCad 10.0 · needs KiCad 10.0 or later to open · KiCad file format 20260206
Name Last commit message Last updated
docs Publish 0.1.0 · Ray
viewers lm2852ymxax-1-0: viewers · Ray
lm2852ymxax-1-0-etched.glb Publish 0.1.0 · Ray
lm2852ymxax-1-0-etched.step lm2852ymxax-1-0: factory component page (tier=mfr) · Ray
lm2852ymxax-1-0-hero.glb lm2852ymxax-1-0: hero GLB from the etched model (keeps the MPN mark) · Ray
lm2852ymxax-1-0-hero.overlay.json Publish 0.1.0 · Ray
lm2852ymxax-1-0.glb Publish 0.1.0 · Ray
lm2852ymxax-1-0.kicad_mod Publish 0.1.0 · Ray
lm2852ymxax-1-0.kicad_sym Publish 0.1.0 · Ray
lm2852ymxax-1-0.lbr Publish 0.1.0 · Ray
lm2852ymxax-1-0.step Publish 0.1.0 · Ray
package.json Publish 0.1.1 · Ray
page.json Publish 0.1.1 · Ray
README.md Publish 0.1.0 · Ray

LM2852YMXAX-1.0

Texas Instruments · DC-DC Converters · HTSSOP-14-EP

LM2852YMXAX-1.0 from Texas Instruments, in a HTSSOP-14-EP. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 AVIN power_in Chip bias input that powers the logic of the chip; connect to the input voltage or a separate rail (2.85V to 5.5V recommended).
2 EN input Enable pin: connect to ground to disable the chip, connect to AVIN or leave floating to enable; internally pulled up.
3 SGND power_in Signal ground.
4 SS input Soft-start pin; connect a small capacitor to control startup, with capacitance restricted to 1 nF to 50 nF.
5 NC unconnected No connect; must be tied to ground or left floating in the application.
6 PVIN power_in Input supply pin connected to the input voltage and to the source of the internal power PFET (1.5V to 5.5V recommended).
7 PVIN power_in Input supply pin connected to the input voltage and to the source of the internal power PFET (1.5V to 5.5V recommended).
8 SW output Switch pin; connect to the output inductor.
9 SW output Switch pin; connect to the output inductor.
10 PGND power_in Power ground; connect to an internal ground plane or other large ground plane.
11 PGND power_in Power ground; connect to an internal ground plane or other large ground plane.
12 NC unconnected No connect; must be tied to ground or left floating in the application.
13 NC unconnected No connect; must be tied to ground or left floating in the application.
14 SNS input Output voltage sense pin; connect to the output voltage as close to the load as possible.
15 EP power_in Exposed pad; connect to ground.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package HTSSOP-14-EP
Category Power Supply Chip
Pins 15

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Output voltage tolerance, 1-V option VOUT 0.9775 1.0225 V VOUT = 1-V option 5
Line regulation (TJ -40 to 125°C) ΔVOUT/ΔAVIN 0.6 % VOUT = 1 V, 2.85 V ≤ AVIN ≤ 5.5 V, TJ = -40°C to 125°C 5
Line regulation (25°C) ΔVOUT/ΔAVIN 0.2 % VOUT = 1 V, 2.85 V ≤ AVIN ≤ 5.5 V, TJ = 25°C 5
Load regulation ΔVOUT/ΔIO 8 mV/A Normal operation, TJ = 25°C 5
UVLO threshold rising (AVIN) VON 2.85 V Rising, TJ = -40°C to 125°C 5
UVLO threshold rising (AVIN) 25°C VON 2.47 V Rising, TJ = 25°C 5
UVLO falling hysteresis VON 85 210 mV Falling hysteresis, TJ = -40°C to 125°C 5
UVLO falling hysteresis 25°C VON 150 mV Falling hysteresis, TJ = 25°C 5
PFET ON resistance rDSON-P 140 mΩ Isw = 2 A, TJ = -40°C to 125°C 5
PFET ON resistance 25°C rDSON-P 75 mΩ Isw = 2 A, TJ = 25°C 5
NFET ON resistance rDSON-N 120 mΩ Isw = 2 A, TJ = -40°C to 125°C 5
NFET ON resistance 25°C rDSON-N 55 mΩ Isw = 2 A, TJ = 25°C 5
Soft-start resistance RSS 400 kΩ TJ = 25°C 5
Peak current limit threshold ICL 2.25 3.65 A LM2852Y, TJ = -40°C to 125°C 5
Peak current limit threshold 25°C ICL 3 A LM2852Y, TJ = 25°C 5
Operating current IQ 2 mA Non-switching, TJ = -40°C to 125°C 5
Operating current 25°C IQ 0.85 mA Non-switching, TJ = 25°C 5
Shutdown quiescent current ISD 25 µA EN = 0 V, TJ = -40°C to 125°C 5
Shutdown quiescent current 25°C ISD 10 µA EN = 0 V, TJ = 25°C 5
Sense pin resistance RSNS 400 kΩ TJ = 25°C 5
Oscillator frequency fosc 325 625 kHz LM2852Y 500-kHz option, TJ = -40°C to 125°C 6
Oscillator frequency 25°C fosc 500 kHz LM2852Y 500-kHz option, TJ = 25°C 6
Duty cycle Drange 0 100 % 6
EN pin minimum high input VIH 75 % of AVIN 6
EN pin maximum low input VIL 25 % of AVIN 6
EN pin pullup current IEN 1.2 µA EN = 0 V, TJ = 25°C 6
Thermal shutdown temperature TSD 165 °C TJ = 25°C 6
Thermal shutdown hysteresis TSD-HYS 10 °C TJ = 25°C 6
PVIN to GND PVIN 1.5 5.5 V 4
AVIN to GND AVIN 2.85 5.5 V 4
Junction temperature TJ -40 125 °C 4
PVIN, AVIN, EN, SNS 6.5 V 4
Infrared soldering 220 °C Infrared (15 sec) 4
Vapor phase soldering 215 °C Vapor phase (60 sec) 4
Maximum junction temperature 150 °C 4
Storage temperature Tstg -65 150 °C 4
ESD HBM V(ESD) -2000 2000 V Human-body model (HBM), per ANSI/ESDA/JEDEC JS-001 4
Junction-to-ambient thermal resistance RθJA 39.2 °C/W PWP (HTSSOP) 14 pins 4
Junction-to-case (top) thermal resistance RθJC(top) 24.1 °C/W 4
Junction-to-board thermal resistance RθJB 20.1 °C/W 4
Junction-to-top characterization parameter ψJT 0.6 °C/W 4
Junction-to-board characterization parameter ψJB 19.8 °C/W 4
Junction-to-case (bottom) thermal resistance RθJC(bot) 1.7 °C/W 4

CAD (KiCad official)

  • Symbol: LM2852YMXAX-1.0
  • Footprint: Package_SO:TSSOP-14-1EP_4.4x5mm_P0.65mm
  • 3D model: HTSSOP-14-EP (KiCad packages3D, STEP)
  • 3D model files: lm2852ymxax-1-0-etched.step / lm2852ymxax-1-0-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); lm2852ymxax-1-0.step / lm2852ymxax-1-0.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (30 pp, sha256 284b53595f280275, retrieved 2026-10-27, tier: manufacturer)
  • Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-sonnet-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF