component
LM2852XMXAX-3.3
Public Made by Adomby adom
Texas Instruments DC-DC Converters, HTSSOP-14-EP. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
Made with KiCad 10.0 · needs KiCad 10.0 or later to open · KiCad file format 20260206
| Name | Last updated |
|---|---|
| docs | 13h ago |
| viewers | 13h ago |
| lm2852xmxax-3-3-etched.glb | 13h ago |
| lm2852xmxax-3-3-etched.step | 13h ago |
| lm2852xmxax-3-3-hero.glb | 10h ago |
| lm2852xmxax-3-3-hero.overlay.json | 13h ago |
| lm2852xmxax-3-3.glb | 13h ago |
| lm2852xmxax-3-3.kicad_mod | 13h ago |
| lm2852xmxax-3-3.kicad_sym | 13h ago |
| lm2852xmxax-3-3.lbr | 13h ago |
| lm2852xmxax-3-3.step | 13h ago |
| package.json | 13h ago |
| page.json | 13h ago |
| README.md | 13h ago |
LM2852XMXAX-3.3
Texas Instruments · DC-DC Converters · HTSSOP-14-EP
LM2852XMXAX-3.3 from Texas Instruments, in a HTSSOP-14-EP. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | AVIN | power_in | Chip bias input that powers the chip logic; connect to the input voltage or a separate rail, with AVIN to GND specified at 2.85 V to 5.5 V. |
| 2 | EN | input | Enable input: connect to ground to disable the chip, or connect to AVIN or leave floating to enable it, since it is internally pulled up. |
| 3 | SGND | power_in | Signal ground that must be tied together with all other ground connections on a broad ground plane. |
| 4 | SS | input | Soft-start pin; connect a small capacitor in the range 1 nF to 50 nF to control startup. |
| 5 | NC | unconnected | No connect; must be tied to ground or left floating in the application. |
| 6 | PVIN | power_in | Input supply pin connected to the input voltage and the source of the internal power PFET, with PVIN to GND specified at 1.5 V to 5.5 V. |
| 7 | PVIN | power_in | Input supply pin connected to the input voltage and the source of the internal power PFET, with PVIN to GND specified at 1.5 V to 5.5 V. |
| 8 | SW | output | Switch node pin that connects to the output inductor; connections must be low resistance and short but wide. |
| 9 | SW | output | Switch node pin that connects to the output inductor; connections must be low resistance and short but wide. |
| 10 | PGND | power_in | Power ground that connects to an internal ground plane or other large ground plane. |
| 11 | PGND | power_in | Power ground that connects to an internal ground plane or other large ground plane. |
| 12 | NC | unconnected | No connect; must be tied to ground or left floating in the application. |
| 13 | NC | unconnected | No connect; must be tied to ground or left floating in the application. |
| 14 | SNS | input | Output voltage sense pin; connect it to the output voltage as close to the load as possible and keep it away from high-EMI nodes such as the switch node. |
| 15 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | HTSSOP-14-EP |
| Category | Power Management (PMIC) |
| Pins | 15 |
CAD (KiCad official)
- Symbol:
LM2852XMXAX-3.3 - Footprint:
Package_SO:TSSOP-14-1EP_4.4x5mm_P0.65mm - 3D model: HTSSOP-14-EP (KiCad packages3D, STEP)
- 3D model files:
lm2852xmxax-3-3-etched.step/lm2852xmxax-3-3-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);lm2852xmxax-3-3.step/lm2852xmxax-3-3.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (31 pp, sha256
a151270f4e87c234, retrieved 2026-10-08, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).