component
LM2852XMXAX-1.8
Public Made by Adomby adom
Texas Instruments DC-DC Converters, HTSSOP-14-EP. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownLM2852XMXAX-1.8
Texas Instruments · DC-DC Converters · HTSSOP-14-EP
LM2852XMXAX-1.8 from Texas Instruments, in a HTSSOP-14-EP. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | AVIN | input | Chip bias input that powers the chip's logic; connect it to the input voltage or a separate rail. |
| 2 | EN | input | Enable pin: connect to ground to disable the chip, or connect to AVIN or leave floating to enable it, as it is internally pulled up. |
| 3 | SGND | power_in | Signal ground for the control circuitry. |
| 4 | SS | input | Soft-start pin that takes a small capacitor to control startup, with the soft-start capacitance restricted to 1 nF to 50 nF. |
| 5 | NC | unconnected | No connect; must be tied to ground or left floating in the application. |
| 6 | PVIN | input | Input supply pin connected to the input voltage, feeding the source of the internal power PFET. |
| 7 | PVIN | input | Input supply pin connected to the input voltage, feeding the source of the internal power PFET. |
| 8 | SW | output | Switch pin; connect to the output inductor. |
| 9 | SW | output | Switch pin; connect to the output inductor. |
| 10 | PGND | power_in | Power ground; connect to an internal ground plane or other large ground plane. |
| 11 | PGND | power_in | Power ground; connect to an internal ground plane or other large ground plane. |
| 12 | NC | unconnected | No connect; must be tied to ground or left floating in the application. |
| 13 | NC | unconnected | No connect; must be tied to ground or left floating in the application. |
| 14 | SNS | output | Output voltage sense pin; connect it to the output voltage as close to the load as possible. |
| 15 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | HTSSOP-14-EP |
| Category | Power Supply Chip |
| Pins | 15 |
CAD (KiCad official)
- Symbol:
LM2852XMXAX-1.8 - Footprint:
Package_SO:TSSOP-14-1EP_4.4x5mm_P0.65mm - 3D model: HTSSOP-14-EP (KiCad packages3D, STEP)
- 3D model files:
lm2852xmxax-1-8-etched.step/lm2852xmxax-1-8-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);lm2852xmxax-1-8.step/lm2852xmxax-1-8.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (31 pp, sha256
a151270f4e87c234, retrieved 2026-10-11, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).