main
Ray
Publish 0.1.1
b1332d0
123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241242243244245246247248249250251252253254
{
"schema_version": 1,
"type": "component",
"slug": "lm27762dsst",
"title": "LM27762DSST",
"brief": "Texas Instruments Charge Pumps, WSON-12-EP(2x3). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
"version": "0.1.1",
"license": "CC-BY-SA-4.0",
"tags": [
"component",
"power management (pmic)",
"lm27762dsst",
"factory-2.0.0",
"extractor-text"
],
"component": {
"mpn": "LM27762DSST",
"manufacturer": "Texas Instruments",
"package": "WSON-12-EP(2x3)",
"pin_count": 13,
"category": "Power Management (PMIC)",
"subcategory": "Charge Pumps",
"datasheet": "https://www.ti.com/cn/lit/gpn/lm27762",
"parts": {
"symbol": "lm27762dsst.kicad_sym",
"footprint": "lm27762dsst.kicad_mod",
"model_3d": "lm27762dsst-hero.glb",
"model_3d_plain": "lm27762dsst.glb",
"model_3d_step": "lm27762dsst-etched.step",
"model_3d_step_plain": "lm27762dsst.step",
"lbr": "lm27762dsst.lbr"
},
"distributor_links": {
"lcsc": "C134018",
"digikey": "296-44944-2-ND",
"mouser": "595-LM27762DSST"
},
"distributor_check": {
"checked_at": "2026-10-01T17:34:24Z",
"source": "Component Ocean /api/assign-pns",
"digikey": {
"pn": "296-44944-2-ND",
"status": "found",
"lifecycle": "Active"
},
"mouser": {
"pn": "595-LM27762DSST",
"status": "found"
}
},
"pins": [
{
"number": "1",
"name": "PGOOD",
"type": "tri_state",
"description": "Power good open-drain output flag; logic 0 indicates power normal, logic 1 indicates power not normal; must be grounded when not used."
},
{
"number": "2",
"name": "FB+",
"type": "input",
"description": "Feedback input for positive LDO output voltage setting through external resistor divider between OUT+ and GND; do not leave open."
},
{
"number": "3",
"name": "VIN",
"type": "power_in",
"description": "Positive power supply input with operating range 2.7 V to 5.5 V."
},
{
"number": "4",
"name": "GND",
"type": "power_in",
"description": "Ground connection."
},
{
"number": "5",
"name": "CP",
"type": "power_out",
"description": "Charge pump negative unregulated output voltage connection for negative LDO supply."
},
{
"number": "6",
"name": "OUT-",
"type": "power_out",
"description": "Regulated negative output voltage adjustable from -1.5 V to -5 V with maximum 250 mA output current capability."
},
{
"number": "7",
"name": "FB-",
"type": "input",
"description": "Feedback input for negative LDO output voltage setting through external resistor divider between OUT- and GND; do not leave open."
},
{
"number": "8",
"name": "EN-",
"type": "input",
"description": "Enable input for charge pump and negative LDO, active high with threshold at 1.2 V."
},
{
"number": "9",
"name": "C1-",
"type": "passive",
"description": "Negative terminal of flying capacitor C1 in charge pump circuit."
},
{
"number": "10",
"name": "C1+",
"type": "passive",
"description": "Positive terminal of flying capacitor C1 in charge pump circuit."
},
{
"number": "11",
"name": "OUT+",
"type": "power_out",
"description": "Regulated positive output voltage adjustable from 1.5 V to 5 V with maximum 250 mA output current capability."
},
{
"number": "12",
"name": "EN+",
"type": "input",
"description": "Enable input for positive LDO, active high with threshold at 1.2 V."
},
{
"number": "13",
"name": "Thermal Pad",
"type": "power_in",
"description": "Thermal pad and ground connection point; must be soldered to printed circuit board for thermal and mechanical performance; do not leave open."
}
],
"provenance": {
"extractor": "extract_pins 0.2",
"factory_chain": {
"factory": "2.0.0",
"extractor": "extract_pins 0.2",
"primary_model": "claude-haiku-4-5-20251001",
"primary_mode": "text",
"consensus_model": "claude-sonnet-4-6",
"consensus": "agreed",
"guards": "pin_guards 0.1: passed",
"guard_notes": [
"1/13 pins cited to the wrong page (name found elsewhere): ['13:Thermal Pad@p3']"
],
"pages_sent": 30,
"cost_usd": 0.3648,
"at": "2026-10-01T17:34:04"
},
"datasheet": {
"url": "https://www.ti.com/cn/lit/gpn/lm27762",
"pages": 30,
"sha256": "e2531cb2ef707b1e",
"source_tier": "lcsc"
},
"cad": "KiCad official (CC-BY-SA 4.0)",
"pins": {
"total": 13,
"described": 13,
"cites_pages": true,
"refuses_to_fabricate": true
}
},
"viewers": {
"symbol": "viewers/symbol.html",
"footprint": "viewers/footprint.html"
},
"models_3d": [
{
"file": "lm27762dsst.step",
"role": "plain",
"up": "Z",
"units": "mm",
"origin": "footprint origin = pad-pattern centre",
"seat": "z = 0",
"extents_mm": [
2.02,
3,
0.75
],
"zmin_mm": 0,
"centre_offset_mm": 0,
"footprint_binding": "identity",
"sha256": "2367c57037a61ff7c42aeab8c1d2a5cca83e9439f5a35ac92bdb758ea8fc2820",
"checked": "2026-10-07",
"checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
},
{
"file": "lm27762dsst-etched.step",
"role": "eda",
"up": "Z",
"units": "mm",
"origin": "footprint origin = pad-pattern centre",
"seat": "z = 0",
"extents_mm": [
2.02,
3,
0.75
],
"zmin_mm": 0,
"centre_offset_mm": 0,
"footprint_binding": "identity",
"sha256": "4457014b39c40ff202425874076efdc200e4e603922c9ab2291d1bca84e65cd5",
"checked": "2026-10-16",
"checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
}
]
},
"metadata": {
"specs": {
"Manufacturer": "Texas Instruments",
"Package": "WSON-12-EP(2x3)",
"Category": "Power Management (PMIC)",
"Pins": "13"
}
},
"variants": [],
"sections": [
"hero",
"viewers",
"readme",
"breadcrumbs",
"info"
],
"discovery_triggers": [
"lm27762dsst"
],
"discovery_pitch": "LM27762DSST (Texas Instruments) component page: datasheet pinout, KiCad symbol, footprint and 3D.",
"author": {
"name": "Ray"
},
"dependencies": {},
"hero": {
"type": "image",
"path": "docs/hero.png"
},
"files": [
"page.json",
"README.md",
"lm27762dsst.kicad_sym",
"lm27762dsst.kicad_mod",
"lm27762dsst.glb",
"lm27762dsst.step",
"lm27762dsst.lbr",
"docs/hero.png",
"docs/lm27762dsst-datasheet.pdf",
"viewers/symbol.html",
"viewers/footprint.html",
"lm27762dsst-etched.step",
"lm27762dsst-hero.glb",
"lm27762dsst-hero.overlay.json"
],
"visibility": "public",
"description": "Texas Instruments Charge Pumps, WSON-12-EP(2x3). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
"org": "adom"
}