main
Ray Publish 0.1.1 b1332d0
{
  "slug": "lm27762dsst",
  "version": "0.1.1",
  "type": "component",
  "description": "Texas Instruments Charge Pumps, WSON-12-EP(2x3). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "power management (pmic)",
    "lm27762dsst",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "lm27762dsst.kicad_sym",
    "lm27762dsst.kicad_mod",
    "lm27762dsst.glb",
    "lm27762dsst.step",
    "lm27762dsst.lbr",
    "docs/hero.png",
    "docs/lm27762dsst-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "lm27762dsst-etched.step",
    "lm27762dsst-hero.glb",
    "lm27762dsst-hero.overlay.json"
  ],
  "component": {
    "mpn": "LM27762DSST",
    "manufacturer": "Texas Instruments",
    "package": "WSON-12-EP(2x3)",
    "pin_count": 13,
    "category": "Power Management (PMIC)",
    "subcategory": "Charge Pumps",
    "datasheet": "https://www.ti.com/cn/lit/gpn/lm27762",
    "parts": {
      "symbol": "lm27762dsst.kicad_sym",
      "footprint": "lm27762dsst.kicad_mod",
      "model_3d": "lm27762dsst-hero.glb",
      "model_3d_plain": "lm27762dsst.glb",
      "model_3d_step": "lm27762dsst-etched.step",
      "model_3d_step_plain": "lm27762dsst.step",
      "lbr": "lm27762dsst.lbr"
    },
    "distributor_links": {
      "lcsc": "C134018",
      "digikey": "296-44944-2-ND",
      "mouser": "595-LM27762DSST"
    },
    "distributor_check": {
      "checked_at": "2026-10-01T17:34:24Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": "296-44944-2-ND",
        "status": "found",
        "lifecycle": "Active"
      },
      "mouser": {
        "pn": "595-LM27762DSST",
        "status": "found"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "PGOOD",
        "type": "tri_state",
        "description": "Power good open-drain output flag; logic 0 indicates power normal, logic 1 indicates power not normal; must be grounded when not used."
      },
      {
        "number": "2",
        "name": "FB+",
        "type": "input",
        "description": "Feedback input for positive LDO output voltage setting through external resistor divider between OUT+ and GND; do not leave open."
      },
      {
        "number": "3",
        "name": "VIN",
        "type": "power_in",
        "description": "Positive power supply input with operating range 2.7 V to 5.5 V."
      },
      {
        "number": "4",
        "name": "GND",
        "type": "power_in",
        "description": "Ground connection."
      },
      {
        "number": "5",
        "name": "CP",
        "type": "power_out",
        "description": "Charge pump negative unregulated output voltage connection for negative LDO supply."
      },
      {
        "number": "6",
        "name": "OUT-",
        "type": "power_out",
        "description": "Regulated negative output voltage adjustable from -1.5 V to -5 V with maximum 250 mA output current capability."
      },
      {
        "number": "7",
        "name": "FB-",
        "type": "input",
        "description": "Feedback input for negative LDO output voltage setting through external resistor divider between OUT- and GND; do not leave open."
      },
      {
        "number": "8",
        "name": "EN-",
        "type": "input",
        "description": "Enable input for charge pump and negative LDO, active high with threshold at 1.2 V."
      },
      {
        "number": "9",
        "name": "C1-",
        "type": "passive",
        "description": "Negative terminal of flying capacitor C1 in charge pump circuit."
      },
      {
        "number": "10",
        "name": "C1+",
        "type": "passive",
        "description": "Positive terminal of flying capacitor C1 in charge pump circuit."
      },
      {
        "number": "11",
        "name": "OUT+",
        "type": "power_out",
        "description": "Regulated positive output voltage adjustable from 1.5 V to 5 V with maximum 250 mA output current capability."
      },
      {
        "number": "12",
        "name": "EN+",
        "type": "input",
        "description": "Enable input for positive LDO, active high with threshold at 1.2 V."
      },
      {
        "number": "13",
        "name": "Thermal Pad",
        "type": "power_in",
        "description": "Thermal pad and ground connection point; must be soldered to printed circuit board for thermal and mechanical performance; do not leave open."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.2",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.2",
        "primary_model": "claude-haiku-4-5-20251001",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-4-6",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "1/13 pins cited to the wrong page (name found elsewhere): ['13:Thermal Pad@p3']"
        ],
        "pages_sent": 30,
        "cost_usd": 0.3648,
        "at": "2026-10-01T17:34:04"
      },
      "datasheet": {
        "url": "https://www.ti.com/cn/lit/gpn/lm27762",
        "pages": 30,
        "sha256": "e2531cb2ef707b1e",
        "source_tier": "lcsc"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 13,
        "described": 13,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "lm27762dsst.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          2.02,
          3.0,
          0.75
        ],
        "zmin_mm": 0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "2367c57037a61ff7c42aeab8c1d2a5cca83e9439f5a35ac92bdb758ea8fc2820",
        "checked": "2026-10-07",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "lm27762dsst-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          2.02,
          3.0,
          0.75
        ],
        "zmin_mm": 0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "4457014b39c40ff202425874076efdc200e4e603922c9ab2291d1bca84e65cd5",
        "checked": "2026-10-16",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  },
  "title": "LM27762DSST",
  "brief": "Texas Instruments Charge Pumps, WSON-12-EP(2x3). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "metadata": {
    "specs": {
      "Manufacturer": "Texas Instruments",
      "Package": "WSON-12-EP(2x3)",
      "Category": "Power Management (PMIC)",
      "Pins": "13"
    }
  },
  "discovery_triggers": [
    "lm27762dsst"
  ],
  "discovery_pitch": "LM27762DSST (Texas Instruments) component page: datasheet pinout, KiCad symbol, footprint and 3D.",
  "visibility": "public"
}