main
Ray Publish 0.1.0 23a217e
{
  "slug": "lm27762dssr",
  "version": "0.1.0",
  "type": "component",
  "description": "Texas Instruments Charge Pumps, WSON-12-EP(2x3). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "power management (pmic)",
    "lm27762dssr",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "lm27762dssr.kicad_sym",
    "lm27762dssr.kicad_mod",
    "lm27762dssr.glb",
    "lm27762dssr.step",
    "lm27762dssr.lbr",
    "docs/hero.png",
    "docs/lm27762dssr-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "lm27762dssr-hero.glb",
    "lm27762dssr-hero.overlay.json"
  ],
  "component": {
    "mpn": "LM27762DSSR",
    "manufacturer": "Texas Instruments",
    "package": "WSON-12-EP(2x3)",
    "pin_count": 13,
    "category": "Power Management (PMIC)",
    "subcategory": "Charge Pumps",
    "datasheet": "https://www.ti.com/lit/ds/symlink/lm27762.pdf",
    "parts": {
      "symbol": "lm27762dssr.kicad_sym",
      "footprint": "lm27762dssr.kicad_mod",
      "model_3d": "lm27762dssr-hero.glb",
      "model_3d_plain": "lm27762dssr.glb",
      "model_3d_step": "lm27762dssr-etched.step",
      "model_3d_step_plain": "lm27762dssr.step",
      "lbr": "lm27762dssr.lbr"
    },
    "distributor_links": {
      "lcsc": "C473398",
      "digikey": "296-47331-1-ND",
      "mouser": "595-LM27762DSSR"
    },
    "distributor_check": {
      "checked_at": "2026-11-16T23:50:28Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": "296-47331-1-ND",
        "status": "found"
      },
      "mouser": {
        "pn": "595-LM27762DSSR",
        "status": "found"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "PGOOD",
        "type": "output",
        "description": "Power Good flag, open drain; Logic 0 = power good, Logic 1 = power not good, and it should be connected to ground if not used."
      },
      {
        "number": "2",
        "name": "FB+",
        "type": "input",
        "description": "Feedback input that must be connected to an external resistor divider between OUT+ and GND and must not be left unconnected."
      },
      {
        "number": "3",
        "name": "VIN",
        "type": "power_in",
        "description": "Positive power supply input, operating from 2.7 V to 5.5 V."
      },
      {
        "number": "4",
        "name": "GND",
        "type": "power_in",
        "description": "Ground."
      },
      {
        "number": "5",
        "name": "CP",
        "type": "power_out",
        "description": "Negative unregulated output voltage of the inverting charge pump."
      },
      {
        "number": "6",
        "name": "OUT-",
        "type": "power_out",
        "description": "Regulated negative output voltage, adjustable from -1.5 V to -5 V."
      },
      {
        "number": "7",
        "name": "FB–",
        "type": "input",
        "description": "Feedback input that must be connected to an external resistor divider between OUT- and GND and must not be left unconnected."
      },
      {
        "number": "8",
        "name": "EN-",
        "type": "input",
        "description": "Enable input for the charge pump and negative LDO, active high."
      },
      {
        "number": "9",
        "name": "C1-",
        "type": "passive",
        "description": "Negative terminal for the flying capacitor C1 of the charge pump."
      },
      {
        "number": "10",
        "name": "C1+",
        "type": "passive",
        "description": "Positive terminal for the flying capacitor C1 of the charge pump."
      },
      {
        "number": "11",
        "name": "OUT+",
        "type": "power_out",
        "description": "Regulated positive output voltage, adjustable from 1.5 V to 5 V."
      },
      {
        "number": "12",
        "name": "EN+",
        "type": "input",
        "description": "Enable input for the positive LDO, active high."
      },
      {
        "number": "13",
        "name": "EP",
        "type": "passive",
        "description": "Exposed pad (from the footprint; not named in the datasheet pin table)."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-haiku-5-5",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: The thermal pad is a ground connection listed in Table 4-1 but has no numbered pin, so it is omitted; Package hint WSON-12-EP(2x3) is matched to DSS (WSON, 12), which the datasheet gives as 3mm x 2mm. T",
          "exposed pad 13 added from the footprint"
        ],
        "pages_sent": 7,
        "cost_usd": 0.027,
        "at": "2026-11-16T23:50:13"
      },
      "datasheet": {
        "url": "https://www.ti.com/lit/ds/symlink/lm27762.pdf",
        "pages": 30,
        "sha256": "465db259d11b3b2f",
        "source_tier": "mfr"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "model_3d_generated": {
        "generator": "factory/gen_pkg3d.py",
        "family": "WSON",
        "height_mm": 0.75,
        "height_basis": "family nominal (no datasheet A read)",
        "standoff_mm": 0.0
      },
      "pins": {
        "total": 13,
        "described": 13,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "lm27762dssr.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          2.02,
          3.0,
          0.75
        ],
        "zmin_mm": 0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "4b1fc0cf60362642c1411daa6b4f2557a390815a599a37c7c8cc8098768f15c2",
        "checked": "2026-11-16",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "lm27762dssr-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          2.02,
          3.0,
          0.75
        ],
        "zmin_mm": 0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "af8bc549ccaf0e2ad715306a03d034cf0e8fcde28e5215fc75dcf1c940ddad6b",
        "checked": "2026-11-16",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  }
}