3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownLM2775QDSGRQ1
Texas Instruments · DC-DC Converters · WSON-8-EP(2x2)
LM2775QDSGRQ1 from Texas Instruments, in a WSON-8-EP(2x2). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | PFM | input | PFM mode enable that allows or disallows PFM operation: 1 = PFM enabled, 0 = PFM disabled; absolute maximum is VIN + 0.3 V with 6 V max. |
| 2 | C1- | passive | Flying capacitor pin (negative terminal; a 2.2 µF capacitor is used in the typical application). |
| 3 | C1+ | passive | Flying capacitor pin (positive terminal; a 2.2 µF capacitor is used in the typical application). |
| 4 | OUTDIS | input | Output disconnect option: 1 = active output discharge during shutdown, 0 = high impedance output without pull-down during shutdown; absolute maximum is VIN + 0.3 V with 6 V max. |
| 5 | EN | input | Chip enable: 1 = enabled, 0 = disabled; absolute maximum is VIN + 0.3 V with 6 V max. |
| 6 | VOUT | output | Charge pump output with fixed 5 V regulation, up to 200 mA output current; absolute maximum is 6 V. |
| 7 | VIN | power_in | Input voltage pin with a recommended operating range of 2.7 V to 5.5 V and an absolute maximum of 6 V. |
| 8 | GND | power_in | Ground pin. |
| 9 | GND | power_in | Thermal pad, connect to GND. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | WSON-8-EP(2x2) |
| Category | Power Supply Chip |
| Pins | 9 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Output voltage regulation | VOUT | 4.8 | 5 | 5.2 | V | IOUT = 180 mA | 5 |
| Switching frequency | ƒSW | 1.7 | 2 | 2.3 | MHz | 5 | |
| Shutdown current | ISD | 0.7 | 3 | µA | EN = '0' | 5 | |
| Quiescent current | IQ | 75 | 150 | µA | IOUT = 0 mA, PFM = '1' | 5 | |
| Input logic low: EN, OUTDIS, PFM | VIL | 0 | 0.4 | V | 5 | ||
| Input logic high: EN, OUTDIS, PFM | VIH | 1.2 | V | printed as 1.2 VIN | 5 | ||
| Absolute maximum VIN, VOUT | VIN, VOUT | -0.3 | 6 | V | 4 | ||
| Absolute maximum EN, OUTDIS, PFM | EN, OUTDIS, PFM | -0.3 | V | max VIN + 0.3 with 6 V max | 4 | ||
| Junction temperature (TJ-MAX) | TJ-MAX | 150 | °C | 4 | |||
| Storage temperature | Tstg | -65 | 150 | °C | 4 | ||
| ESD human-body model | V(ESD) | -2000 | 2000 | V | HBM per AEC Q100-002 | 4 | |
| ESD charged-device model | V(ESD) | -750 | 750 | V | CDM per AEC Q100-011 | 4 | |
| Input voltage | VIN | 2.7 | 5.5 | V | 4 | ||
| Junction temperature | TJ | -40 | 125 | °C | 4 | ||
| Output current | IOUT | 200 | mA | TJ<TTSD | 4 | ||
| Output discharge current | IOUTDIS | 500 | µA | OUTDIS = '1' | 5 | ||
| Input current limit | ICL | 600 | mA | 5 | |||
| Quiescent current | IQ | 5 | mA | IOUT = 0 mA, PFM = '0' | 5 | ||
| Undervoltage lockout, VIN falling | UVLO | 2.4 | V | VIN falling | 5 | ||
| Undervoltage lockout, VIN rising | UVLO | 2.6 | V | VIN rising | 5 | ||
| Thermal shutdown threshold | TTSD | 150 | °C | TJ rising | 5 | ||
| Thermal shutdown hysteresis | 20 | °C | TJ falling below TTSD | 5 | |||
| Junction-to-ambient thermal resistance | RθJA | 71.6 | °C/W | 4 | |||
| Junction-to-case (top) thermal resistance | RθJC(top) | 95 | °C/W | 4 | |||
| Junction-to-board thermal resistance | RθJB | 41.5 | °C/W | 4 | |||
| Junction-to-top characterization parameter | ψJT | 3.2 | °C/W | 4 | |||
| Junction-to-board characterization parameter | ψJB | 41.8 | °C/W | 4 | |||
| Junction-to-case (bottom) thermal resistance | RθJC(bot) | 12.8 | °C/W | 4 |
CAD (KiCad official)
- Symbol:
LM2775QDSGRQ1 - Footprint:
Package_SON:WSON-8-1EP_2x2mm_P0.5mm_EP0.9x1.6mm - 3D model: WSON-8-EP(2x2) (KiCad packages3D, STEP)
- 3D model files:
lm2775qdsgrq1-etched.step/lm2775qdsgrq1-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);lm2775qdsgrq1.step/lm2775qdsgrq1.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (30 pp, sha256
8aa60727ad5751b4, retrieved 2026-11-10, tier: manufacturer) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).