main
History Download
Ray lm2775dsgr: laser-etched CAD + chip hero (factory 2.0.0 backfill) dcfea5c

LM2775DSGR

Texas Instruments · DC-DC Converters · WSON-8-EP(2x2)

LM2775DSGR from Texas Instruments, in a WSON-8-EP(2x2). Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 PFM input PFM mode enable. Logic high (1) allows PFM operation for improved light-load efficiency; logic low (0) forces fixed-frequency PWM. Logic thresholds: VIL ≤ 0.4 V, VIH ≥ 1.2 V (referenced to VIN, max VIN + 0.3 V).
2 C1- passive Flying capacitor negative terminal. Connect a 1 µF ceramic flying capacitor (C1) between C1+ (pin 3) and C1- (pin 2) for the switched-capacitor charge pump.
3 C1+ passive Flying capacitor positive terminal. Connect a 1 µF ceramic flying capacitor (C1) between C1+ (pin 3) and C1- (pin 2) for the switched-capacitor charge pump.
4 OUTDIS input Output disconnect / discharge option. Logic high (1) enables active output discharge (~500 µA typical) during shutdown; logic low (0) leaves the output high-impedance without pull-down during shutdown. Logic thresholds: VIL ≤ 0.4 V, VIH ≥ 1.2 V.
5 EN input Chip enable. Logic high (1) enables the converter; logic low (0) shuts the device down (ISD ≈ 0.7 µA). Logic thresholds: VIL ≤ 0.4 V, VIH ≥ 1.2 V (max VIN + 0.3 V).
6 VOUT power_out Charge-pump output. Regulated 5 V (4.8 V to 5.2 V) at up to 200 mA. Bypass to GND with a 2.2 µF ceramic capacitor. Input current limit ICL ≈ 600 mA.
7 VIN power_in Input voltage supply, 2.7 V to 5.5 V (abs max 6 V). Bypass to GND with a 2.2 µF ceramic capacitor. UVLO rising ≈ 2.6 V, falling ≈ 2.4 V.
8 GND power_in Device ground return. Connect to system ground plane along with the thermal pad.
9 GND power_in Exposed thermal pad on the bottom of the WSON package. Must be connected to GND and to a copper pour for thermal performance (RθJC(bot) ≈ 12.8 °C/W).

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package WSON-8-EP(2x2)
Category PMIC
Pins 9

Ordering variants

Same part, different packaging or reel option.

  • LM2775DSGR
  • LM2775DSGRDSGT

CAD (KiCad official)

  • Symbol: LM2775DSGR
  • Footprint: Package_SON:WSON-8-1EP_2x2mm_P0.5mm_EP0.9x1.6mm
  • 3D model: WSON-8-EP(2x2) (KiCad packages3D, STEP)
  • 3D model files: lm2775dsgr-etched.step / lm2775dsgr-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); lm2775dsgr.step / lm2775dsgr.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (28 pp, sha256 1c2c46d32f10cd73, retrieved 2026-08-17, tier: manufacturer)
  • Extractor: ds2sf (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF