3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Contents
README
markdownLM2772SD
Texas Instruments · DC-DC Converters · WSON-10-EP(3x3)
LM2772SD from Texas Instruments, in a WSON-10-EP(3x3). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VIN | power_in | Input voltage pin with a recommended operating range of 3.0V to 5.5V (the Operating Ratings table lists 2.7V to 5.5V). |
| 2 | GND | power_in | Ground pin; all voltages are referenced to the GND pins. |
| 3 | VOUT | power_out | Regulated 1.2V output that supplies loads up to 150mA. |
| 4 | C3- | passive | Negative terminal of flying capacitor C3. |
| 5 | C3+ | passive | Positive terminal of flying capacitor C3. |
| 6 | C2- | passive | Negative terminal of flying capacitor C2. |
| 7 | C2+ | passive | Positive terminal of flying capacitor C2. |
| 8 | C1- | passive | Negative terminal of flying capacitor C1. |
| 9 | C1+ | passive | Positive terminal of flying capacitor C1. |
| 10 | EN | input | Enable logic input; a logic HIGH enables the part and a logic LOW places it in shutdown. |
| 11 | GND | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | WSON-10-EP(3x3) |
| Category | Power Supply Chip |
| Pins | 11 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| VOUT 1.2V Output Voltage Regulation | VOUT | 1.164 | 1.2 | 1.236 | V | 3.0V ≤ VIN ≤ 5.5V; 0mA ≤ IOUT ≤ 150mA | 4 |
| VOUT 1.2V Output Voltage Regulation | VOUT | 1.178 | 1.2 | 1.236 | V | 0mA ≤ IOUT ≤ 150mA | 4 |
| VOUT regulation tolerance (first condition) | VOUT | -3 | 3 | % | 3.0V ≤ VIN ≤ 5.5V; 0mA ≤ IOUT ≤ 150mA | 4 | |
| VOUT regulation tolerance (second condition) | VOUT | -1.8 | 3 | % | 0mA ≤ IOUT ≤ 150mA | 4 | |
| Shutdown Current | ISD | 0.01 | 0.3 | µA | V(EN) = 0V | 4 | |
| Quiescent Supply Current | IQ | 47 | 50 | µA | IOUT = 0mA(4) | 4 | |
| Switching Frequency | FSW | 0.8 | 1.15 | 1.5 | MHz | 3.0V ≤ VIN ≤ 5.5V | 4 |
| Logic-low Input Voltage | VIL | 0 | 0.63 | V | 3.0V ≤ VIN ≤ 5.5V | 4 | |
| Logic-high Input Voltage | VIH | 1.1 | V | 3.0V ≤ VIN ≤ 5.5V | 4 | ||
| VIN Pin Voltage | -0.3 | 6 | V | 3 | |||
| EN Pin Voltage | -0.3 | 6 | V | upper limit (VIN+0.3V) with 6.0V max | 3 | ||
| Junction Temperature (TJ-MAX) | TJ-MAX | 150 | ºC | 3 | |||
| Storage Temperature Range | -65 | 150 | ºC | 3 | |||
| Maximum Lead Temperature | 265 | ºC | 3 | ||||
| ESD Rating | 2 | kV | Human Body Model | 3 | |||
| Input Voltage Range | VIN | 2.7 | 5.5 | V | 3 | ||
| Recommended Load Current Range | 0 | 150 | mA | 3 | |||
| Junction Temperature (TJ) Range | TJ | -30 | 110 | °C | 3 | ||
| Ambient Temperature (TA) Range | TA | -30 | 85 | °C | 3 | ||
| Input Current Limit (not in min/max table; printed as typical in text) | ICL | 500 | mA | VIN = 5.5V; 0V ≤ VOUT ≤ 0.2V | 4 | ||
| Logic-high Input Current | IIH | 5 | µA | V(EN) = 1.8V(5) | 4 | ||
| Logic-low Input Current | IIL | 0.01 | µA | Logic Input = 0V | 4 | ||
| Turn-on Time | tON | 150 | µs | 4 | |||
| Output Load Regulation | VOUT/IOUT | 0.15 | mV/mA | 0mA ≤ IOUT ≤ 150mA | 4 | ||
| Output Line Regulation | VOUT/VIN | 0.2 | %/V | 4 | |||
| Power Efficiency | E | 80 | % | IOUT = 150mA | 4 | ||
| Fixed Frequency Output Ripple | VR | 8 | mV | 40mA ≤ IOUT ≤ 150mA | 4 | ||
| PFM-Mode Output Ripple | VR-PFM | 12 | mV | IOUT < 40mA | 4 | ||
| Junction-to-Ambient Thermal Resistance (WSON-10) | θJA | 55 | °C/W | WSON-10 Package | 3 |
Materials and finish
As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| housing | Abs | Human Body Model: 2.0kV (1) Absolute Maximum Ratings indicate limits beyond which damage to the component may occur. Operating Ratings are conditions under | 3 |
CAD (KiCad official)
- Symbol:
LM2772SD - Footprint:
Package_SON:VSON-10-1EP_3x3mm_P0.5mm_EP1.2x2mm - 3D model: WSON-10-EP(3x3) (KiCad packages3D, STEP)
- 3D model files:
lm2772sd-etched.step/lm2772sd-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);lm2772sd.step/lm2772sd.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (17 pp, sha256
163e30a63362a691, retrieved 2026-10-31, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).