main
Ray
lm2735xmfx: laser-etched CAD + chip hero (factory 2.0.0 backfill)
6a54900
LM2735XMFX
Texas Instruments · DC-DC Converters · SOT-23-5
LM2735XMFX from Texas Instruments, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | SW | output | Output switch node. Drain of the internal 170-mΩ NMOS power switch (2.1-A rating, absolute-max SW voltage -0.5 V to 26.5 V). Connect to the boost inductor and the anode of the output Schottky diode. |
| 2 | GND | power_in | Signal and power ground pin (SOT-23 combines AGND and PGND). Place the bottom resistor of the feedback network as close as possible to this pin and route with a low-impedance return to the input/output capacitor grounds. |
| 3 | FB | input | Feedback input to the internal error amplifier. Connect to an external resistor divider from the output to set VOUT via VFB = 1.23 V (±2 %). Absolute-max FB voltage -0.5 V to 3 V. |
| 4 | EN | input | Active-high shutdown/enable control input. Logic high enables normal operation; logic low places the device into ~80-nA standby. Do not float; do not drive above VIN + 0.3 V (absolute max -0.5 V to 7 V). |
| 5 | VIN | power_in | Supply voltage for the power stage and internal control circuitry. Operating range 2.7 V to 5.5 V (absolute max 7 V). Bypass locally with a low-ESR ceramic capacitor referenced to GND. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SOT-23-5 |
| Category | PMIC |
| Pins | 5 |
Ordering variants
Same part, different packaging or reel option.
LM2735XMFXLM2735XMFXXSDLM2735XMFXXSDXLM2735XMFXXMY
CAD (KiCad official)
- Symbol:
LM2735XMFX - Footprint:
Package_TO_SOT_SMD:SOT-23-5 - 3D model: SOT-23-5 (KiCad packages3D, STEP)
- 3D model files:
lm2735xmfx-etched.step/lm2735xmfx-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);lm2735xmfx.step/lm2735xmfx.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (None pp, sha256
32efa6e88b2375a9, retrieved 2026-08-17, tier: manufacturer) - Extractor:
ds2sf(Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# LM2735XMFX
**Texas Instruments** · DC-DC Converters · SOT-23-5
LM2735XMFX from Texas Instruments, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | SW | output | Output switch node. Drain of the internal 170-mΩ NMOS power switch (2.1-A rating, absolute-max SW voltage -0.5 V to 26.5 V). Connect to the boost inductor and the anode of the output Schottky diode. |
| 2 | GND | power_in | Signal and power ground pin (SOT-23 combines AGND and PGND). Place the bottom resistor of the feedback network as close as possible to this pin and route with a low-impedance return to the input/output capacitor grounds. |
| 3 | FB | input | Feedback input to the internal error amplifier. Connect to an external resistor divider from the output to set VOUT via VFB = 1.23 V (±2 %). Absolute-max FB voltage -0.5 V to 3 V. |
| 4 | EN | input | Active-high shutdown/enable control input. Logic high enables normal operation; logic low places the device into ~80-nA standby. Do not float; do not drive above VIN + 0.3 V (absolute max -0.5 V to 7 V). |
| 5 | VIN | power_in | Supply voltage for the power stage and internal control circuitry. Operating range 2.7 V to 5.5 V (absolute max 7 V). Bypass locally with a low-ESR ceramic capacitor referenced to GND. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SOT-23-5 |
| Category | PMIC |
| Pins | 5 |
## Ordering variants
Same part, different packaging or reel option.
- `LM2735XMFX`
- `LM2735XMFXXSD`
- `LM2735XMFXXSDX`
- `LM2735XMFXXMY`
## CAD (KiCad official)
- Symbol: `LM2735XMFX`
- Footprint: `Package_TO_SOT_SMD:SOT-23-5`
- 3D model: SOT-23-5 (KiCad packages3D, STEP)
- 3D model files: `lm2735xmfx-etched.step` / `lm2735xmfx-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `lm2735xmfx.step` / `lm2735xmfx.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/lit/ds/symlink/lm2735xmfx.pdf) (None pp, sha256 `32efa6e88b2375a9`, retrieved 2026-08-17, tier: manufacturer)
- **Extractor:** `ds2sf` (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/lm2735xmfx-datasheet.pdf)