main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs lm27222mx: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
viewers lm27222mx: viewers · Ray
lm27222mx-etched.fit.json lm27222mx: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
lm27222mx-etched.glb lm27222mx: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
lm27222mx-etched.step lm27222mx: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
lm27222mx.glb Publish 0.1.0 · Ray
lm27222mx.kicad_mod Publish 0.1.0 · Ray
lm27222mx.kicad_sym Publish 0.1.0 · Ray
lm27222mx.lbr Publish 0.1.0 · Ray
lm27222mx.step Publish 0.1.0 · Ray
package.json Publish 0.1.0 · Ray
page.json lm27222mx: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding) · Ray
README.md lm27222mx: laser-etched CAD + chip hero (factory 2.0.0 backfill) · Ray

LM27222MX

Texas Instruments · Gate Drivers · SOIC-8

LM27222MX from Texas Instruments, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 SW power_in High-side driver return. Connect to the common switch node between the high-side and low-side MOSFETs. Can swing from -2V to 30V (see abs max notes on negative duty cycle).
2 HG output High-side gate drive output. Connect to the high-side MOSFET gate. Internally pulled down to SW with a 10kΩ resistor to prevent spurious turn-on when the driver is off. Peak 3A source / 4.5A sink; 0.9Ω pull-up / 0.4Ω pull-down.
3 CB power_in Bootstrap capacitor input. Provides the boosted supply rail for the high-side driver referenced to SW. CB-to-GND absolute max 36V (operating 33V max); CB-to-SW abs max 7V.
4 IN input PWM input from the controller. Active high. Internally pulled down to GND with a 150kΩ resistor to prevent spurious turn-on when the controller is inactive. Thresholds ~65%/30% of VCC with ~0.7V hysteresis.
5 LEN input Low-side gate enable. Active high; enables synchronous operation of the low-side driver (supports synchronous, non-synchronous, and diode-emulation modes). Internally pulled down to GND with a 150kΩ resistor. Thresholds ~65%/30% of VCC.
6 VCC power_in Bias supply input. Connect to a +5V rail (operating range 4V to 6.85V; abs max 7V). Quiescent current typ 5µA with IN and LEN low.
7 LG output Low-side gate drive output. Connect to the low-side MOSFET gate. Internally pulled down to GND with a 10kΩ resistor to prevent spurious turn-on when the driver is off. Peak 3.2A source / 4.5A sink; 0.9Ω pull-up / 0.4Ω pull-down.
8 GND power_in Device ground. Return for VCC bias and the low-side driver.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package SOIC-8
Category Motor Driver ICs
Pins 8

Ordering variants

Same part, different packaging or reel option.

  • LM27222MXM
  • LM27222MX
  • LM27222MXSD
  • LM27222MXSDX

CAD (KiCad official)

  • Symbol: LM27222MX
  • Footprint: Package_SO:SOIC-8_3.9x4.9mm_P1.27mm
  • 3D model: SOIC-8 (KiCad packages3D, STEP)
  • 3D model files: lm27222mx-etched.step / lm27222mx-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); lm27222mx.step / lm27222mx.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (None pp, sha256 6dae1079f3288309, retrieved 2026-08-17, tier: lcsc)
  • Extractor: ds2sf (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF