main
Ray
Publish 0.1.0
a6b8c80
LM2677SX-3.3
Texas Instruments · DC-DC Converters · TO-263-7
LM2677SX-3.3 from Texas Instruments, in a TO-263-7. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VSW | output | Source pin of the internal high-side FET and the switching node; attach it to the inductor and the cathode of the external diode. |
| 2 | VIN | power_in | Supply input to the collector of the high-side FET; connect to the power supply and input bypass capacitor CIN with a short path to GND, with the recommended supply range being 8 V to 40 V (45 V absolute maximum). |
| 3 | CB | input | Bootstrap capacitor connection for the high-side driver; connect a high-quality 100-nF capacitor from CB to VSW. |
| 4 | GND | power_in | Power ground pin; connect to system ground, keeping the path to the input capacitor CIN as short as possible. |
| 5 | SYNC | input | Allows control of the switching clock frequency with an external clock in the 280 kHz to 400 kHz range; if left open-circuited, the regulator switches at the internal oscillator frequency, typically 260 kHz. |
| 6 | FB | input | Feedback sense input; connect to the midpoint of the feedback divider for the adjustable version, or directly to the output capacitor for fixed-output versions, with an absolute maximum feedback pin voltage of -0.3 V to 14 V. |
| 7 | ON/OFF | input | Enable input where high or floating turns the regulator on and low turns it off; the pin voltage is limited to -0.1 V to 6 V (absolute maximum). |
| 8 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | TO-263-7 |
| Category | Power Supply Chip |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input supply voltage | 45 | V | 4 | ||||
| ON/OFF pin voltage | -0.1 | 6 | V | 4 | |||
| Switch voltage to ground | -1 | V | DC voltage (footnote 3); upper limit printed as VIN | 4 | |||
| Feedback pin voltage | -0.3 | 14 | V | 4 | |||
| Soldering temperature, wave | 260 | °C | Wave, 4 s | 4 | |||
| Soldering temperature, infrared | 240 | °C | Infrared, 10 s | 4 | |||
| Soldering temperature, vapor phase | 219 | °C | Vapor phase, 75 s | 4 | |||
| Storage temperature | Tstg | -65 | 150 | °C | 4 | ||
| ESD human-body model | V(ESD) | -2000 | 2000 | V | HBM, per ANSI/ESDA/JEDEC JS-001 | 4 | |
| Supply voltage | 8 | 40 | V | Over operating free-air temperature range | 4 | ||
| Junction temperature | TJ | -40 | 125 | °C | 4 | ||
| Output voltage, TJ = 25°C | VOUT | 3.234 | 3.3 | 3.366 | V | VIN = 8 V to 40 V, 100 mA ≤ IOUT ≤ 5 A; TJ = 25°C | 5 |
| Output voltage, TJ = -40°C to 125°C | VOUT | 3.201 | 3.399 | V | VIN = 8 V to 40 V, 100 mA ≤ IOUT ≤ 5 A; TJ = -40°C to 125°C | 5 | |
| Quiescent current | IQ | 4.2 | 6 | mA | VFEEDBACK = 8 V for 3.3-V, 5-V, and adjustable versions, VFEEDBACK = 15 V for 12-V versions | 6 | |
| Standby quiescent current, TJ = 25°C | ISTBY | 50 | 100 | μA | ON/OFF pin = 0 V; TJ = 25°C | 6 | |
| Standby quiescent current, TJ = -40°C to 125°C | ISTBY | 150 | μA | ON/OFF pin = 0 V; TJ = -40°C to 125°C | 6 | ||
| Current limit, TJ = 25°C | ICL | 6.1 | 7 | 8.3 | A | TJ = 25°C | 6 |
| Current limit, TJ = -40°C to 125°C | ICL | 5.75 | 8.75 | A | TJ = -40°C to 125°C | 6 | |
| Output leakage current, VIN = 40 V | IL | 1 | 200 | μA | VIN = 40 V, ON/OFF pin = 0 V | 6 | |
| Output leakage current, switch off | IL | 15 | μA | VSWITCH = 0 V | 6 | ||
| Output leakage current, switch reverse | IL | 6 | mA | VSWITCH = -1 V | 6 | ||
| Switch on-resistance, TJ = 25°C | RDS(ON) | 0.12 | 0.14 | Ω | ISWITCH = 5 A; TJ = 25°C | 6 | |
| Switch on-resistance, TJ = -40°C to 125°C | RDS(ON) | 0.225 | Ω | ISWITCH = 5 A; TJ = -40°C to 125°C | 6 | ||
| Oscillator frequency | fO | 225 | 280 | kHz | Measured at switch pin; TJ = -40°C to 125°C | 6 | |
| Maximum duty cycle | D | 91 | % | 6 | |||
| Minimum duty cycle | D | 0 | % | 6 | |||
| ON/OFF threshold voltage | VON/OFF | 0.8 | 2 | V | TJ = -40°C to 125°C | 6 | |
| ON/OFF input current | ION/OFF | 45 | μA | ON/OFF input = 0 V; TJ = -40°C to 125°C | 6 | ||
| Synchronization frequency | FSYNC | 400 | kHz | VSYNC(pin 5) = 3.5 V, 50% duty cycle | 6 | ||
| Junction-to-ambient thermal resistance, 7-pin TO-263 (see note 2) | RθJA | 56 | °C/W | KTW (TO-263), mounted horizontally on 0.136 in² of 1 oz copper | 5 | ||
| Junction-to-ambient thermal resistance, 7-pin TO-263 (see note 3) | RθJA | 35 | °C/W | KTW (TO-263), mounted horizontally on 0.4896 in² of 1 oz copper | 5 | ||
| Junction-to-ambient thermal resistance, 7-pin TO-263 (see note 4) | RθJA | 26 | °C/W | KTW (TO-263), mounted horizontally on 1.0064 in² of 1 oz copper | 5 | ||
| Junction-to-case (top) thermal resistance | RθJC(top) | 2 | °C/W | KTW (TO-263) | 5 |
Materials and finish
As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| contacts | copper | (4) Junction to ambient thermal resistance for the 7-pin DDPAK/TO-263 mounted horizontally against a PC board copper area of 1.0064 | 5 |
CAD (KiCad official)
- Symbol:
LM2677SX-3.3 - Footprint:
Package_TO_SOT_SMD:TO-263-7_TabPin8 - 3D model: TO-263-7 (KiCad packages3D, STEP)
- 3D model files:
lm2677sx-3-3-etched.step/lm2677sx-3-3-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);lm2677sx-3-3.step/lm2677sx-3-3.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (31 pp, sha256
b50d0a6dfa554b7a, retrieved 2026-10-31, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# LM2677SX-3.3
**Texas Instruments** · DC-DC Converters · TO-263-7
LM2677SX-3.3 from Texas Instruments, in a TO-263-7. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VSW | output | Source pin of the internal high-side FET and the switching node; attach it to the inductor and the cathode of the external diode. |
| 2 | VIN | power_in | Supply input to the collector of the high-side FET; connect to the power supply and input bypass capacitor CIN with a short path to GND, with the recommended supply range being 8 V to 40 V (45 V absolute maximum). |
| 3 | CB | input | Bootstrap capacitor connection for the high-side driver; connect a high-quality 100-nF capacitor from CB to VSW. |
| 4 | GND | power_in | Power ground pin; connect to system ground, keeping the path to the input capacitor CIN as short as possible. |
| 5 | SYNC | input | Allows control of the switching clock frequency with an external clock in the 280 kHz to 400 kHz range; if left open-circuited, the regulator switches at the internal oscillator frequency, typically 260 kHz. |
| 6 | FB | input | Feedback sense input; connect to the midpoint of the feedback divider for the adjustable version, or directly to the output capacitor for fixed-output versions, with an absolute maximum feedback pin voltage of -0.3 V to 14 V. |
| 7 | ON/OFF | input | Enable input where high or floating turns the regulator on and low turns it off; the pin voltage is limited to -0.1 V to 6 V (absolute maximum). |
| 8 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | TO-263-7 |
| Category | Power Supply Chip |
| Pins | 8 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input supply voltage | | | | 45 | V | | 4 |
| ON/OFF pin voltage | | -0.1 | | 6 | V | | 4 |
| Switch voltage to ground | | -1 | | | V | DC voltage (footnote 3); upper limit printed as VIN | 4 |
| Feedback pin voltage | | -0.3 | | 14 | V | | 4 |
| Soldering temperature, wave | | | | 260 | °C | Wave, 4 s | 4 |
| Soldering temperature, infrared | | | | 240 | °C | Infrared, 10 s | 4 |
| Soldering temperature, vapor phase | | | | 219 | °C | Vapor phase, 75 s | 4 |
| Storage temperature | Tstg | -65 | | 150 | °C | | 4 |
| ESD human-body model | V(ESD) | -2000 | | 2000 | V | HBM, per ANSI/ESDA/JEDEC JS-001 | 4 |
| Supply voltage | | 8 | | 40 | V | Over operating free-air temperature range | 4 |
| Junction temperature | TJ | -40 | | 125 | °C | | 4 |
| Output voltage, TJ = 25°C | VOUT | 3.234 | 3.3 | 3.366 | V | VIN = 8 V to 40 V, 100 mA ≤ IOUT ≤ 5 A; TJ = 25°C | 5 |
| Output voltage, TJ = -40°C to 125°C | VOUT | 3.201 | | 3.399 | V | VIN = 8 V to 40 V, 100 mA ≤ IOUT ≤ 5 A; TJ = -40°C to 125°C | 5 |
| Quiescent current | IQ | | 4.2 | 6 | mA | VFEEDBACK = 8 V for 3.3-V, 5-V, and adjustable versions, VFEEDBACK = 15 V for 12-V versions | 6 |
| Standby quiescent current, TJ = 25°C | ISTBY | | 50 | 100 | μA | ON/OFF pin = 0 V; TJ = 25°C | 6 |
| Standby quiescent current, TJ = -40°C to 125°C | ISTBY | | | 150 | μA | ON/OFF pin = 0 V; TJ = -40°C to 125°C | 6 |
| Current limit, TJ = 25°C | ICL | 6.1 | 7 | 8.3 | A | TJ = 25°C | 6 |
| Current limit, TJ = -40°C to 125°C | ICL | 5.75 | | 8.75 | A | TJ = -40°C to 125°C | 6 |
| Output leakage current, VIN = 40 V | IL | | 1 | 200 | μA | VIN = 40 V, ON/OFF pin = 0 V | 6 |
| Output leakage current, switch off | IL | | | 15 | μA | VSWITCH = 0 V | 6 |
| Output leakage current, switch reverse | IL | | | 6 | mA | VSWITCH = -1 V | 6 |
| Switch on-resistance, TJ = 25°C | RDS(ON) | | 0.12 | 0.14 | Ω | ISWITCH = 5 A; TJ = 25°C | 6 |
| Switch on-resistance, TJ = -40°C to 125°C | RDS(ON) | | | 0.225 | Ω | ISWITCH = 5 A; TJ = -40°C to 125°C | 6 |
| Oscillator frequency | fO | 225 | | 280 | kHz | Measured at switch pin; TJ = -40°C to 125°C | 6 |
| Maximum duty cycle | D | | | 91 | % | | 6 |
| Minimum duty cycle | D | 0 | | | % | | 6 |
| ON/OFF threshold voltage | VON/OFF | 0.8 | | 2 | V | TJ = -40°C to 125°C | 6 |
| ON/OFF input current | ION/OFF | | | 45 | μA | ON/OFF input = 0 V; TJ = -40°C to 125°C | 6 |
| Synchronization frequency | FSYNC | | | 400 | kHz | VSYNC(pin 5) = 3.5 V, 50% duty cycle | 6 |
| Junction-to-ambient thermal resistance, 7-pin TO-263 (see note 2) | RθJA | | 56 | | °C/W | KTW (TO-263), mounted horizontally on 0.136 in² of 1 oz copper | 5 |
| Junction-to-ambient thermal resistance, 7-pin TO-263 (see note 3) | RθJA | | 35 | | °C/W | KTW (TO-263), mounted horizontally on 0.4896 in² of 1 oz copper | 5 |
| Junction-to-ambient thermal resistance, 7-pin TO-263 (see note 4) | RθJA | | 26 | | °C/W | KTW (TO-263), mounted horizontally on 1.0064 in² of 1 oz copper | 5 |
| Junction-to-case (top) thermal resistance | RθJC(top) | | 2 | | °C/W | KTW (TO-263) | 5 |
## Materials and finish
As the datasheet states them (page.json `metadata.appearance`; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| contacts | copper | | (4) Junction to ambient thermal resistance for the 7-pin DDPAK/TO-263 mounted horizontally against a PC board copper area of 1.0064 | 5 |
## CAD (KiCad official)
- Symbol: `LM2677SX-3.3`
- Footprint: `Package_TO_SOT_SMD:TO-263-7_TabPin8`
- 3D model: TO-263-7 (KiCad packages3D, STEP)
- 3D model files: `lm2677sx-3-3-etched.step` / `lm2677sx-3-3-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `lm2677sx-3-3.step` / `lm2677sx-3-3.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/lit/ds/symlink/lm2677sx-3.3.pdf) (31 pp, sha256 `b50d0a6dfa554b7a`, retrieved 2026-10-31, tier: manufacturer)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/lm2677sx-3-3-datasheet.pdf)