← Commit history
README.md+45−12
@@ -2,19 +2,20 @@  **Texas Instruments** · DC-DC Converters · TO-263-7 -LM2676SX-ADJ from Texas Instruments, in a TO-263-7. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.+LM2676SX-ADJ from Texas Instruments, in a TO-263-7. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.  ## Pinout  | Pin | Name | Type | Function | |---|---|---|---|-| 1 | Switch_output | output | Source pin of the internal high-side DMOS FET; the switching node. Connects to the inductor and the cathode of the external catch (freewheel) diode. |+| 1 | Switch_output | passive | Source pin of the internal high-side DMOS FET; the switching node. Connects to the inductor and the cathode of the external catch (freewheel) diode. | | 2 | Input | power_in | Supply input to the drain of the internal high-side FET. Connect to the 8-V to 40-V supply with input bypass capacitor CIN; path from VIN to bypass CIN and GND must be as short as possible. |-| 3 | CB | passive | Boot-strap capacitor connection for the high-side gate driver. Connect a high-quality 100-nF capacitor from CB to the Switch_output (VSW) pin. |+| 3 | CB | input | Boot-strap capacitor connection for the high-side gate driver. Connect a high-quality 100-nF capacitor from CB to the Switch_output (VSW) pin. | | 4 | GND | power_in | Power ground. Connect to system ground; return path for CIN and COUT must be short and low-impedance. |-| 5 | NC | unconnected | No connect. Leave floating or tie per PCB convention. |+| 5 | NC | no_connect | No connect. Leave floating or tie per PCB convention. | | 6 | FB | input | Feedback sense input. For the ADJ version, connect to the midpoint of an external resistor divider from VOUT to GND to program the output voltage (VREF ≈ 1.21 V). Absolute max range −0.3 V to 14 V. | | 7 | ON/OFF | input | Enable input for the regulator. High (or float) = ON, Low = OFF; pull high or float to enable, drive low for ~50-µA standby shutdown. |+| 8 | GND | power_in | Package tab (pad 8). Table 4-1: all DAP, tab, and paddle connections are at ground potential and must be connected to system ground. |  ## Key specifications @@ -23,16 +24,48 @@ LM2676SX-ADJ from Texas Instruments, in a TO-263-7. Pinout and pin descriptions | Manufacturer | Texas Instruments | | Package | TO-263-7 | | Category | PMIC |-| Pins | 7 |+| Pins | 8 | -## Ordering variants+## Electrical characteristics -Same part, different packaging or reel option.+Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data). -- `LM2676SX-ADJ`-- `LM2676SX-ADJS`-- `LM2676SX-ADJT`-- `LM2676SX-ADJSD`+| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |+|---|---|---|---|---|---|---|---|+| Feedback voltage | VFB | 1.186 | 1.21 | 1.234 | V | VIN = 8 V to 40 V, 100 mA ≤ IOUT ≤ 3 A, VOUT programmed for 5 V | 6 |+| Feedback voltage over junction temperature | VFB | 1.174 |  | 1.246 | V | Over junction temperature range -40°C to 125°C; VIN = 8 V to 40 V, 100 mA ≤ IOUT ≤ 3 A, VOUT programmed for 5 V | 6 |+| Quiescent current | IQ |  | 4.2 | 6 | mA | VFEEDBACK = 8 V for 3.3-V, 5-V, and ADJ versions; VFEEDBACK = 15 V for 12-V versions | 6 |+| Standby quiescent current | ISTBY |  | 50 | 100 | µA | ON/OFF pin = 0 V | 6 |+| Standby quiescent current over junction temperature | ISTBY |  |  | 150 | µA | ON/OFF pin = 0 V; over junction temperature range -40°C to 125°C | 6 |+| Current limit | ICL | 3.8 | 4.5 | 5.25 | A |  | 6 |+| Current limit over junction temperature | ICL | 3.6 |  | 5.4 | A | Over junction temperature range -40°C to 125°C | 6 |+| Output leakage current | IL |  |  | 200 | µA | VIN = 40 V, soft-start pin = 0 V; VSWITCH = 0 V | 6 |+| Switch ON-resistance | RDS(ON) |  | 0.15 | 0.17 | Ω | ISWITCH = 3 A | 6 |+| Switch ON-resistance over junction temperature | RDS(ON) |  |  | 0.29 | Ω | ISWITCH = 3 A; over junction temperature range -40°C to 125°C | 6 |+| Oscillator frequency over junction temperature | fO | 225 |  | 280 | kHz | Measured at switch pin; over junction temperature range -40°C to 125°C | 6 |+| Maximum duty cycle | D |  |  | 91 | % |  | 6 |+| Minimum duty cycle | D | 0 |  |  | % |  | 6 |+| ON/OFF threshold voltage over junction temperature | VON/OFF | 0.8 |  | 2 | V | Over junction temperature range -40°C to 125°C | 6 |+| ON/OFF input current over junction temperature | ION/OFF |  |  | 45 | µA | ON/OFF pin = 0 V; over junction temperature range -40°C to 125°C | 6 |+| Input supply voltage | VIN |  |  | 45 | V |  | 4 |+| Soft-start pin voltage |  | -0.1 |  | 6 | V |  | 4 |+| Switch voltage to ground |  | -1 |  |  | V | DC voltage; max printed as VIN. Extended negative limits: -10 V for pulses up to 20 ns, -6 V up to 60 ns, -3 V up to 100 ns | 4 |+| Feedback pin voltage |  | -0.3 |  | 14 | V |  | 4 |+| Soldering temperature, wave |  |  |  | 260 | °C | Wave, 4 s | 4 |+| Soldering temperature, infrared |  |  |  | 240 | °C | Infrared, 10 s | 4 |+| Soldering temperature, vapor phase |  |  |  | 219 | °C | Vapor phase, 75 s | 4 |+| Storage temperature | Tstg | -65 |  | 150 | °C |  | 4 |+| Supply voltage |  | 8 |  | 40 | V |  | 4 |+| Junction temperature | TJ | -40 |  | 125 | °C |  | 4 |+| Junction-to-case (top) thermal resistance | RθJC(top) |  | 2 |  | °C/W |  | 4 |++## Materials and finish++As the datasheet states them (page.json `metadata.appearance`; the 3D model's colours follow it).++| Part | Material | Colour / plating | Datasheet says | Page |+|---|---|---|---|---|+| contacts | copper |  | (2) Junction to ambient thermal resistance (no external heat sink) for the 7-lead TO-220 package mounted vertically, with 0.5 in leads in a socket, or on a PCB with minimum copper area. | 5 |  ## CAD (KiCad official) @@ -45,7 +78,7 @@ Same part, different packaging or reel option.  Data extracted from the manufacturer datasheet, not a distributor listing: -- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/lit/ds/symlink/lm2676sx-adj.pdf) (37 pp, sha256 `3390dfbcdda3c59b`, retrieved 2026-08-17, tier: manufacturer)+- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/lit/ds/symlink/lm2676.pdf) (41 pp, sha256 `2f3085e42097cc93`, retrieved 2026-11-17, tier: manufacturer) - **Extractor:** `ds2sf` (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate. - **CAD:** KiCad official libraries (CC-BY-SA 4.0). 
docs/lm2676sx-adj-datasheet.pdf
⋯ 1 unchanged line ⋯
lm2676sx-adj-hero.glbadded
⋯ 1 unchanged line ⋯
lm2676sx-adj-hero.overlay.jsonadded+265
@@ -0,0 +1,265 @@+{+ "spec": "adom-hero 1.4",+ "mpn": "LM2676SX-ADJ",+ "kind": "component + footprint reference art",+ "board_use": false,+ "plane_z_mm": -0.02,+ "units": "metre",+ "upAxis": "Z",+ "layers": {+  "pad_outlines": {+   "material": "Footprint pads - teal dashed outlines - 50 percent opacity",+   "rgba": [+    0.0,+    0.902,+    0.863,+    0.5+   ],+   "pads": 8,+   "span_mm": 18.55,+   "dash_mm": 0.45,+   "gap_mm": 0.27,+   "pad_stroke_mm": 0.09+  },+  "silkscreen": {+   "material": "Silkscreen reference lines - 30 percent opacity",+   "rgba": [+    0.92,+    0.96,+    1.0,+    0.3+   ],+   "footprint_items": 5,+   "pin1": {+    "source": "footprint silkscreen",+    "pad": "1"+   }+  },+  "signal_names": {+   "material": "Signal names - 50 percent opacity",+   "rgba": [+    0.92,+    0.96,+    1.0,+    0.5+   ],+   "font": "DejaVu Sans Mono",+   "labels": 8,+   "sides": "top + mirrored underside (single-sided)",+   "omitted": null,+   "fallback_to_pad_number": 0+  }+ },+ "align": {+  "ok": true,+  "board_underside": true,+  "electrical_pads_without_contact": [],+  "mounting_pads_left_out": [],+  "centre_offset_mm": 0.0,+  "over_pads": false,+  "tolerance_mm": 1.292,+  "orientation_flipped": false,+  "contacts_bbox_mm": [+   -9.375,+   5.625,+   -5.0,+   5.0+  ],+  "pads_bbox_mm": [+   -9.95,+   6.2,+   -5.4,+   5.4+  ],+  "seating_z_mm": 0.0+ },+ "sources": {+  "glb": "lm2676sx-adj-etched.glb",+  "glb_sha256": "a720d45ae923a0208721475b0f0d50b2fdace85f0ae11da55a50b28af81d05bd",+  "footprint": "lm2676sx-adj.kicad_mod",+  "footprint_sha256": "777bb53188f3029e91dce5500a7734ac73b51c4b6626097d3e53fba39588731f",+  "pins": "page.json component.pins",+  "pins_sha256": "4fca287b2d239ffdf17f740045584de78b769ff1cfd6da02d3f82faaf248dc3c"+ },+ "generator": "factory/hero_glb.py",+ "labels": [+  {+   "pad": "1",+   "text": "Switch_output",+   "x": -10.1,+   "y": -3.81,+   "align": "right",+   "vertical": false,+   "h": 0.6+  },+  {+   "pad": "2",+   "text": "Input",+   "x": -10.1,+   "y": -2.54,+   "align": "right",+   "vertical": false,+   "h": 0.6+  },+  {+   "pad": "3",+   "text": "CB",+   "x": -10.1,+   "y": -1.27,+   "align": "right",+   "vertical": false,+   "h": 0.6+  },+  {+   "pad": "4",+   "text": "GND",+   "x": -10.1,+   "y": 0.0,+   "align": "right",+   "vertical": false,+   "h": 0.6+  },+  {+   "pad": "5",+   "text": "NC",+   "x": -10.1,+   "y": 1.27,+   "align": "right",+   "vertical": false,+   "h": 0.6+  },+  {+   "pad": "6",+   "text": "FB",+   "x": -10.1,+   "y": 2.54,+   "align": "right",+   "vertical": false,+   "h": 0.6+  },+  {+   "pad": "7",+   "text": "ON/OFF",+   "x": -10.1,+   "y": 3.81,+   "align": "right",+   "vertical": false,+   "h": 0.6+  },+  {+   "pad": "8",+   "text": "GND",+   "x": 6.35,+   "y": 0.0,+   "align": "left",+   "vertical": false,+   "h": 0.6+  }+ ],+ "pads": [+  {+   "number": "1",+   "shape": "roundrect",+   "center_mm": [+    -7.65,+    -3.81+   ],+   "size_mm": [+    4.6,+    0.8+   ],+   "rot": 0.0+  },+  {+   "number": "2",+   "shape": "roundrect",+   "center_mm": [+    -7.65,+    -2.54+   ],+   "size_mm": [+    4.6,+    0.8+   ],+   "rot": 0.0+  },+  {+   "number": "3",+   "shape": "roundrect",+   "center_mm": [+    -7.65,+    -1.27+   ],+   "size_mm": [+    4.6,+    0.8+   ],+   "rot": 0.0+  },+  {+   "number": "4",+   "shape": "roundrect",+   "center_mm": [+    -7.65,+    0.0+   ],+   "size_mm": [+    4.6,+    0.8+   ],+   "rot": 0.0+  },+  {+   "number": "5",+   "shape": "roundrect",+   "center_mm": [+    -7.65,+    1.27+   ],+   "size_mm": [+    4.6,+    0.8+   ],+   "rot": 0.0+  },+  {+   "number": "6",+   "shape": "roundrect",+   "center_mm": [+    -7.65,+    2.54+   ],+   "size_mm": [+    4.6,+    0.8+   ],+   "rot": 0.0+  },+  {+   "number": "7",+   "shape": "roundrect",+   "center_mm": [+    -7.65,+    3.81+   ],+   "size_mm": [+    4.6,+    0.8+   ],+   "rot": 0.0+  },+  {+   "number": "8",+   "shape": "roundrect",+   "center_mm": [+    1.5,+    0.0+   ],+   "size_mm": [+    9.4,+    10.8+   ],+   "rot": 0.0+  }+ ]+}\ No newline at end of file
lm2676sx-adj.kicad_sym+9−5
@@ -8,7 +8,7 @@       (stroke (width 0.254) (type default)) (fill (type background)))     )     (symbol "LM2676SX-ADJ_1_1"-    (pin output line (at -17.78 2.54 0) (length 5.08)+    (pin passive line (at -17.78 2.54 0) (length 5.08)       (name "Switch_output" (effects (font (size 1.27 1.27))))       (number "1" (effects (font (size 1.27 1.27))))     )@@ -16,7 +16,7 @@       (name "Input" (effects (font (size 1.27 1.27))))       (number "2" (effects (font (size 1.27 1.27))))     )-    (pin passive line (at -17.78 -2.54 0) (length 5.08)+    (pin input line (at -17.78 -2.54 0) (length 5.08)       (name "CB" (effects (font (size 1.27 1.27))))       (number "3" (effects (font (size 1.27 1.27))))     )@@ -24,15 +24,19 @@       (name "GND" (effects (font (size 1.27 1.27))))       (number "4" (effects (font (size 1.27 1.27))))     )-    (pin input line (at 17.78 2.54 180) (length 5.08)+    (pin power_in line (at 17.78 2.54 180) (length 5.08)+      (name "GND" (effects (font (size 1.27 1.27))))+      (number "8" (effects (font (size 1.27 1.27))))+    )+    (pin input line (at 17.78 0.00 180) (length 5.08)       (name "ON/OFF" (effects (font (size 1.27 1.27))))       (number "7" (effects (font (size 1.27 1.27))))     )-    (pin input line (at 17.78 0.00 180) (length 5.08)+    (pin input line (at 17.78 -2.54 180) (length 5.08)       (name "FB" (effects (font (size 1.27 1.27))))       (number "6" (effects (font (size 1.27 1.27))))     )-    (pin no_connect line (at 17.78 -2.54 180) (length 5.08)+    (pin passive line (at 17.78 -5.08 180) (length 5.08)       (name "NC" (effects (font (size 1.27 1.27))))       (number "5" (effects (font (size 1.27 1.27))))     )
lm2676sx-adj.lbr+11−15
@@ -50,7 +50,7 @@ <layer number="98" name="Guide" color="6" fill="1" visible="yes" active="yes"/> </layers> <library>-<description>Texas Instruments DC-DC Converters, TO-263-7</description>+<description></description> <packages> <package name="TO-263-7_TabPin8">   <description>8 pads, 16.1 x 10.8 mm. TO-263/D2PAK/DDPAK SMD package</description>@@ -61,7 +61,7 @@   <smd name="5" x="-7.6500" y="-1.2700" dx="4.6000" dy="0.8000" layer="1" roundness="50"/>   <smd name="6" x="-7.6500" y="-2.5400" dx="4.6000" dy="0.8000" layer="1" roundness="50"/>   <smd name="7" x="-7.6500" y="-3.8100" dx="4.6000" dy="0.8000" layer="1" roundness="50"/>-  <smd name="8" x="1.5000" y="-0.0000" dx="9.4000" dy="10.8000" layer="1" roundness="5"/>+  <smd name="8" x="1.5000" y="-0.0000" dx="9.4000" dy="10.8000" layer="1" roundness="5" cream="no"/>   <polygon width="0.1200" layer="21">     <vertex x="-7.6500" y="4.4700"/>     <vertex x="-7.9900" y="4.9400"/>@@ -108,25 +108,25 @@ </packages> <symbols> <symbol name="LM2676SX-ADJ">-  <description>Texas Instruments DC-DC Converters, TO-263-7</description>   <wire x1="-12.7" y1="5.08" x2="12.7" y2="5.08" width="0.254" layer="94"/>   <wire x1="12.7" y1="5.08" x2="12.7" y2="-7.62" width="0.254" layer="94"/>   <wire x1="12.7" y1="-7.62" x2="-12.7" y2="-7.62" width="0.254" layer="94"/>   <wire x1="-12.7" y1="-7.62" x2="-12.7" y2="5.08" width="0.254" layer="94"/>   <text x="0.0000" y="7.6200" size="1.27" layer="95" align="center">&gt;NAME</text>   <text x="0.0000" y="-10.1600" size="1.27" layer="96" align="center">&gt;VALUE</text>-  <pin name="Switch_output" x="-17.78" y="2.54" length="middle" direction="out"/>+  <pin name="Switch_output" x="-17.78" y="2.54" length="middle" direction="pas"/>   <pin name="Input" x="-17.78" y="0" length="middle" direction="pwr"/>-  <pin name="CB" x="-17.78" y="-2.54" length="middle" direction="pas"/>+  <pin name="CB" x="-17.78" y="-2.54" length="middle" direction="in"/>   <pin name="GND" x="-17.78" y="-5.08" length="middle" direction="pwr"/>-  <pin name="ON/OFF" x="17.78" y="2.54" length="middle" direction="in" rot="R180"/>-  <pin name="FB" x="17.78" y="0" length="middle" direction="in" rot="R180"/>-  <pin name="NC" x="17.78" y="-2.54" length="middle" direction="io" rot="R180"/>+  <pin name="GND@2" x="17.78" y="2.54" length="middle" direction="pwr" rot="R180"/>+  <pin name="ON/OFF" x="17.78" y="0" length="middle" direction="in" rot="R180"/>+  <pin name="FB" x="17.78" y="-2.54" length="middle" direction="in" rot="R180"/>+  <pin name="NC" x="17.78" y="-5.08" length="middle" direction="pas" rot="R180"/> </symbol> </symbols> <devicesets> <deviceset name="LM2676SX-ADJ" prefix="U">-  <description>Texas Instruments DC-DC Converters, TO-263-7</description>+  <description></description>   <gates>     <gate name="G$1" symbol="LM2676SX-ADJ" x="0" y="0"/>   </gates>@@ -137,16 +137,12 @@         <connect gate="G$1" pin="Input" pad="2"/>         <connect gate="G$1" pin="CB" pad="3"/>         <connect gate="G$1" pin="GND" pad="4"/>+        <connect gate="G$1" pin="GND@2" pad="8"/>         <connect gate="G$1" pin="ON/OFF" pad="7"/>         <connect gate="G$1" pin="FB" pad="6"/>         <connect gate="G$1" pin="NC" pad="5"/>       </connects>-      <technologies>-        <technology name="">-          <attribute name="MPN" value="LM2676SX-ADJ" constant="no"/>-          <attribute name="MANUFACTURER" value="Texas Instruments" constant="no"/>-        </technology>-      </technologies>+      <technologies><technology name=""/></technologies>     </device>   </devices> </deviceset>
package.json+154−6
@@ -1,12 +1,14 @@ {   "slug": "lm2676sx-adj",-  "version": "0.1.0",+  "version": "0.2.0",   "type": "component",-  "description": "Texas Instruments DC-DC Converters, TO-263-7. Datasheet-verified pinout, KiCad symbol/footprint/3D.",+  "description": "Texas Instruments DC-DC Converters, TO-263-7. Pinout settled in review by an AI reviewer against the manufacturer's datasheet, KiCad symbol/footprint/3D.",   "tags": [     "component",     "pmic",-    "lm2676sx-adj"+    "lm2676sx-adj",+    "factory-2.0.0",+    "extractor-text"   ],   "dependencies": {},   "hero": {@@ -24,6 +26,152 @@     "docs/hero.png",     "docs/lm2676sx-adj-datasheet.pdf",     "viewers/symbol.html",-    "viewers/footprint.html"-  ]-}\ No newline at end of file+    "viewers/footprint.html",+    "lm2676sx-adj-hero.glb",+    "lm2676sx-adj-hero.overlay.json"+  ],+  "component": {+    "mpn": "LM2676SX-ADJ",+    "manufacturer": "Texas Instruments",+    "package": "TO-263-7",+    "pin_count": 8,+    "category": "PMIC",+    "subcategory": "DC-DC Converters",+    "datasheet": "https://www.ti.com/lit/ds/symlink/lm2676.pdf",+    "parts": {+      "symbol": "lm2676sx-adj.kicad_sym",+      "footprint": "lm2676sx-adj.kicad_mod",+      "model_3d": "lm2676sx-adj-hero.glb",+      "model_3d_plain": "lm2676sx-adj.glb",+      "model_3d_step": "lm2676sx-adj-etched.step",+      "model_3d_step_plain": "lm2676sx-adj.step",+      "lbr": "lm2676sx-adj.lbr"+    },+    "distributor_links": {+      "digikey": "LM2676SX-ADJTR-ND",+      "mouser": "926-LM2676SX-ADJ"+    },+    "distributor_check": {+      "checked_at": "2026-11-17T06:47:13Z",+      "source": "Component Ocean /api/assign-pns",+      "digikey": {+        "pn": "LM2676SX-ADJTR-ND",+        "status": "found"+      },+      "mouser": {+        "pn": "926-LM2676SX-ADJ",+        "status": "found"+      }+    },+    "pins": [+      {+        "number": "1",+        "name": "Switch_output",+        "type": "passive",+        "description": "Source pin of the internal high-side DMOS FET; the switching node. Connects to the inductor and the cathode of the external catch (freewheel) diode."+      },+      {+        "number": "2",+        "name": "Input",+        "type": "power_in",+        "description": "Supply input to the drain of the internal high-side FET. Connect to the 8-V to 40-V supply with input bypass capacitor CIN; path from VIN to bypass CIN and GND must be as short as possible."+      },+      {+        "number": "3",+        "name": "CB",+        "type": "input",+        "description": "Boot-strap capacitor connection for the high-side gate driver. Connect a high-quality 100-nF capacitor from CB to the Switch_output (VSW) pin."+      },+      {+        "number": "4",+        "name": "GND",+        "type": "power_in",+        "description": "Power ground. Connect to system ground; return path for CIN and COUT must be short and low-impedance."+      },+      {+        "number": "5",+        "name": "NC",+        "type": "no_connect",+        "description": "No connect. Leave floating or tie per PCB convention."+      },+      {+        "number": "6",+        "name": "FB",+        "type": "input",+        "description": "Feedback sense input. For the ADJ version, connect to the midpoint of an external resistor divider from VOUT to GND to program the output voltage (VREF ≈ 1.21 V). Absolute max range −0.3 V to 14 V."+      },+      {+        "number": "7",+        "name": "ON/OFF",+        "type": "input",+        "description": "Enable input for the regulator. High (or float) = ON, Low = OFF; pull high or float to enable, drive low for ~50-µA standby shutdown."+      },+      {+        "number": "8",+        "name": "GND",+        "type": "power_in",+        "description": "Package tab (pad 8). Table 4-1: all DAP, tab, and paddle connections are at ground potential and must be connected to system ground."+      }+    ],+    "provenance": {+      "extractor": "ds2sf",+      "datasheet": {+        "url": "https://www.ti.com/lit/ds/symlink/lm2676.pdf",+        "pages": 41,+        "sha256": "2f3085e42097cc93",+        "source_tier": "mfr"+      },+      "cad": "KiCad official (CC-BY-SA 4.0)",+      "pins": {+        "total": 8,+        "described": 8,+        "cites_pages": true,+        "refuses_to_fabricate": true+      }+    },+    "viewers": {+      "symbol": "viewers/symbol.html",+      "footprint": "viewers/footprint.html"+    },+    "models_3d": [+      {+        "file": "lm2676sx-adj.step",+        "role": "plain",+        "up": "Z",+        "units": "mm",+        "origin": "footprint origin = pad-pattern centre",+        "seat": "z = 0",+        "extents_mm": [+          15.0,+          10.0,+          4.42+        ],+        "zmin_mm": 0.0,+        "centre_offset_mm": 0.0,+        "footprint_binding": "identity",+        "sha256": "34b8121b216e7b6490402befe573a69b06919acafd33d6e8da88bd238574da52",+        "checked": "2026-11-17",+        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+      },+      {+        "file": "lm2676sx-adj-etched.step",+        "role": "eda",+        "up": "Z",+        "units": "mm",+        "origin": "footprint origin = pad-pattern centre",+        "seat": "z = 0",+        "extents_mm": [+          15.0,+          10.0,+          4.42+        ],+        "zmin_mm": 0.0,+        "centre_offset_mm": 0.0,+        "footprint_binding": "identity",+        "sha256": "36aa55905655e765d21b3418d0987b0937fa2f1c690f9f31a8a530b8689cd389",+        "checked": "2026-11-17",+        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+      }+    ]+  }+}
page.json+55−31
@@ -4,36 +4,53 @@   "slug": "lm2676sx-adj",   "title": "LM2676SX-ADJ",   "brief": "Texas Instruments DC-DC Converters, TO-263-7. Pinout extracted from the datasheet, KiCad symbol/footprint/3D.",-  "version": "0.1.0",+  "version": "0.2.0",   "license": "CC-BY-SA-4.0",   "tags": [     "component",     "pmic",-    "lm2676sx-adj"+    "lm2676sx-adj",+    "factory-2.0.0",+    "extractor-text"   ],   "component": {     "mpn": "LM2676SX-ADJ",     "manufacturer": "Texas Instruments",     "package": "TO-263-7",-    "pin_count": 7,+    "pin_count": 8,     "category": "PMIC",     "subcategory": "DC-DC Converters",-    "datasheet": "https://www.ti.com/lit/ds/symlink/lm2676sx-adj.pdf",+    "datasheet": "https://www.ti.com/lit/ds/symlink/lm2676.pdf",     "parts": {       "symbol": "lm2676sx-adj.kicad_sym",       "footprint": "lm2676sx-adj.kicad_mod",-      "model_3d": "lm2676sx-adj-etched.glb",+      "model_3d": "lm2676sx-adj-hero.glb",       "model_3d_plain": "lm2676sx-adj.glb",       "model_3d_step": "lm2676sx-adj-etched.step",       "model_3d_step_plain": "lm2676sx-adj.step",       "lbr": "lm2676sx-adj.lbr"     },-    "distributor_links": {},+    "distributor_links": {+      "digikey": "LM2676SX-ADJTR-ND",+      "mouser": "926-LM2676SX-ADJ"+    },+    "distributor_check": {+      "checked_at": "2026-11-17T06:47:13Z",+      "source": "Component Ocean /api/assign-pns",+      "digikey": {+        "pn": "LM2676SX-ADJTR-ND",+        "status": "found"+      },+      "mouser": {+        "pn": "926-LM2676SX-ADJ",+        "status": "found"+      }+    },     "pins": [       {         "number": "1",         "name": "Switch_output",-        "type": "output",+        "type": "passive",         "description": "Source pin of the internal high-side DMOS FET; the switching node. Connects to the inductor and the cathode of the external catch (freewheel) diode."       },       {@@ -45,7 +62,7 @@       {         "number": "3",         "name": "CB",-        "type": "passive",+        "type": "input",         "description": "Boot-strap capacitor connection for the high-side gate driver. Connect a high-quality 100-nF capacitor from CB to the Switch_output (VSW) pin."       },       {@@ -57,7 +74,7 @@       {         "number": "5",         "name": "NC",-        "type": "unconnected",+        "type": "no_connect",         "description": "No connect. Leave floating or tie per PCB convention."       },       {@@ -71,20 +88,26 @@         "name": "ON/OFF",         "type": "input",         "description": "Enable input for the regulator. High (or float) = ON, Low = OFF; pull high or float to enable, drive low for ~50-µA standby shutdown."+      },+      {+        "number": "8",+        "name": "GND",+        "type": "power_in",+        "description": "Package tab (pad 8). Table 4-1: all DAP, tab, and paddle connections are at ground potential and must be connected to system ground."       }     ],     "provenance": {       "extractor": "ds2sf",       "datasheet": {-        "url": "https://www.ti.com/lit/ds/symlink/lm2676sx-adj.pdf",-        "pages": 37,-        "sha256": "3390dfbcdda3c59b",+        "url": "https://www.ti.com/lit/ds/symlink/lm2676.pdf",+        "pages": 41,+        "sha256": "2f3085e42097cc93",         "source_tier": "mfr"       },       "cad": "KiCad official (CC-BY-SA 4.0)",       "pins": {-        "total": 7,-        "described": 7,+        "total": 8,+        "described": 8,         "cites_pages": true,         "refuses_to_fabricate": true       }@@ -102,15 +125,15 @@         "origin": "footprint origin = pad-pattern centre",         "seat": "z = 0",         "extents_mm": [-          15.0,-          10.0,+          15,+          10,           4.42         ],-        "zmin_mm": 0.0,-        "centre_offset_mm": 0.0,+        "zmin_mm": 0,+        "centre_offset_mm": 0,         "footprint_binding": "identity",         "sha256": "34b8121b216e7b6490402befe573a69b06919acafd33d6e8da88bd238574da52",-        "checked": "2026-10-07",+        "checked": "2026-11-17",         "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"       },       {@@ -121,15 +144,15 @@         "origin": "footprint origin = pad-pattern centre",         "seat": "z = 0",         "extents_mm": [-          15.0,-          10.0,+          15,+          10,           4.42         ],-        "zmin_mm": 0.0,-        "centre_offset_mm": 0.0,+        "zmin_mm": 0,+        "centre_offset_mm": 0,         "footprint_binding": "identity",-        "sha256": "6ec65cc72c62695febd476a4b28c5be5cdb7879e8692b237bfcf835ac0d2cc16",-        "checked": "2026-10-16",+        "sha256": "36aa55905655e765d21b3418d0987b0937fa2f1c690f9f31a8a530b8689cd389",+        "checked": "2026-11-17",         "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"       }     ]@@ -174,11 +197,10 @@     "docs/lm2676sx-adj-datasheet.pdf",     "viewers/symbol.html",     "viewers/footprint.html",-    "lm2676sx-adj-etched.step"+    "lm2676sx-adj-hero.glb",+    "lm2676sx-adj-hero.overlay.json"   ],-  "visibility": {-    "public": true-  },+  "visibility": "public",   "variants": [     {       "mpn": "LM2676SX-ADJ",@@ -197,5 +219,7 @@       "kind": "packaging"     }   ],-  "updated_at": "2026-09-28T16:19:45.819Z"-}+  "updated_at": "2026-09-28T16:19:45.819Z",+  "description": "Texas Instruments DC-DC Converters, TO-263-7. Pinout settled in review by an AI reviewer against the manufacturer's datasheet, KiCad symbol/footprint/3D.",+  "org": "adom"+}\ No newline at end of file
viewers/footprint.html+1−65
@@ -1,65 +1 @@-<!doctype html><html lang=en><head><meta charset=utf-8>-<meta name=viewport content="width=device-width,initial-scale=1"><title>RAY/LM2676SX-ADJ footprint</title>-<style>-:root{--bg:#0d1117;--panel:#161b22;--edge:#30363d;--ink:#e6edf3;--mut:#8b949e;--acc:#00b8b0;--accb:#00e6dc;--hi:#6ea8fe}-*{box-sizing:border-box;margin:0}html,body{height:100%}-body{background:var(--bg);color:var(--ink);font-family:'Satoshi',system-ui,sans-serif;display:flex;flex-direction:column}-.bar{display:flex;flex-wrap:wrap;align-items:center;gap:8px;padding:8px 11px;border-bottom:1px solid var(--edge);flex:none}-.bar .h{font-size:11px;text-transform:uppercase;letter-spacing:.06em;color:var(--mut);font-weight:700}-.bar .sp{flex:1}-.lyrtog{display:inline-flex;align-items:center;gap:6px;font-size:11px;color:var(--mut);background:#1a2130;border:1px solid var(--edge);border-radius:999px;padding:3px 9px;cursor:pointer;user-select:none}-.lyrtog.on{color:var(--ink);border-color:#485162}.lyrtog:not(.on){opacity:.5}-.lyrtog .d{width:8px;height:8px;border-radius:50%;background:#485162}-.stage{flex:1;min-height:0;position:relative;overflow:hidden;background:var(--bg);cursor:grab;touch-action:none}-.stage.drag{cursor:grabbing}-.stage svg{position:absolute;inset:0;width:100%;height:100%}-.pingroup,.pad{cursor:pointer}-.pingroup.hi .pinvis{stroke:var(--hi)!important;stroke-width:7}-rect.pad.hi{stroke:var(--hi);stroke-width:.15;paint-order:stroke}-.lyr-off{display:none}-#tip{position:fixed;z-index:99;pointer-events:none;display:none;max-width:250px;background:#0d1117;border:1px solid var(--acc);border-radius:8px;padding:7px 10px;box-shadow:0 8px 26px #000a}-#tip .tn{font:700 12px ui-monospace,monospace;color:var(--accb)}-#tip .tt{font-size:10px;text-transform:uppercase;letter-spacing:.04em;color:var(--mut);margin-top:1px}-#tip .td{font-size:11px;color:var(--ink);margin-top:5px;line-height:1.4}-</style></head><body>-<div class=bar><span class=h>PCB footprint</span><span class=sp></span><button class="lyrtog on" data-lyr="copper"><span class="d" style="background:#e35d5d"></span>Copper</button><button class="lyrtog on" data-lyr="silk"><span class="d" style="background:#e6edf3"></span>Silkscreen</button><button class="lyrtog" data-lyr="fab"><span class="d" style="background:#8b949e"></span>Fab</button><button class="lyrtog" data-lyr="courtyard"><span class="d" style="background:#bc8cff"></span>Courtyard</button></div>-<div class=stage id=stage><svg xmlns='http://www.w3.org/2000/svg' viewBox='-10.600 -6.050 17.450 12.100' style='width:100%;height:100%'><line class='ly-silk' x1='-4.825' y1='-5.200' x2='-4.825' y2='-4.510' stroke='#d8b4fe' stroke-width='0.120'/><line class='ly-silk' x1='-4.825' y1='5.200' x2='-4.825' y2='4.510' stroke='#d8b4fe' stroke-width='0.120'/><line class='ly-silk' x1='-3.460' y1='-5.200' x2='-4.825' y2='-5.200' stroke='#d8b4fe' stroke-width='0.120'/><line class='ly-silk' x1='-3.460' y1='5.200' x2='-4.825' y2='5.200' stroke='#d8b4fe' stroke-width='0.120'/><line class='ly-fab' x1='-9.325' y1='-4.110' x2='-9.325' y2='-3.510' stroke='#f472b6' stroke-width='0.100'/><line class='ly-fab' x1='-9.325' y1='-3.510' x2='-4.625' y2='-3.510' stroke='#f472b6' stroke-width='0.100'/><line class='ly-fab' x1='-9.325' y1='-2.840' x2='-9.325' y2='-2.240' stroke='#f472b6' stroke-width='0.100'/><line class='ly-fab' x1='-9.325' y1='-2.240' x2='-4.625' y2='-2.240' stroke='#f472b6' stroke-width='0.100'/><line class='ly-fab' x1='-9.325' y1='-1.570' x2='-9.325' y2='-0.970' stroke='#f472b6' stroke-width='0.100'/><line class='ly-fab' x1='-9.325' y1='-0.970' x2='-4.625' y2='-0.970' stroke='#f472b6' stroke-width='0.100'/><line class='ly-fab' x1='-9.325' y1='-0.300' x2='-9.325' y2='0.300' stroke='#f472b6' stroke-width='0.100'/><line class='ly-fab' x1='-9.325' y1='0.300' x2='-4.625' y2='0.300' stroke='#f472b6' stroke-width='0.100'/><line class='ly-fab' x1='-9.325' y1='0.970' x2='-9.325' y2='1.570' stroke='#f472b6' stroke-width='0.100'/><line class='ly-fab' x1='-9.325' y1='1.570' x2='-4.625' y2='1.570' stroke='#f472b6' stroke-width='0.100'/><line class='ly-fab' x1='-9.325' y1='2.240' x2='-9.325' y2='2.840' stroke='#f472b6' stroke-width='0.100'/><line class='ly-fab' x1='-9.325' y1='2.840' x2='-4.625' y2='2.840' stroke='#f472b6' stroke-width='0.100'/><line class='ly-fab' x1='-9.325' y1='3.510' x2='-9.325' y2='4.110' stroke='#f472b6' stroke-width='0.100'/><line class='ly-fab' x1='-9.325' y1='4.110' x2='-4.625' y2='4.110' stroke='#f472b6' stroke-width='0.100'/><line class='ly-fab' x1='-4.625' y1='-2.840' x2='-9.325' y2='-2.840' stroke='#f472b6' stroke-width='0.100'/><line class='ly-fab' x1='-4.625' y1='-1.570' x2='-9.325' y2='-1.570' stroke='#f472b6' stroke-width='0.100'/><line class='ly-fab' x1='-4.625' y1='-0.300' x2='-9.325' y2='-0.300' stroke='#f472b6' stroke-width='0.100'/><line class='ly-fab' x1='-4.625' y1='0.970' x2='-9.325' y2='0.970' stroke='#f472b6' stroke-width='0.100'/><line class='ly-fab' x1='-4.625' y1='2.240' x2='-9.325' y2='2.240' stroke='#f472b6' stroke-width='0.100'/><line class='ly-fab' x1='-4.625' y1='3.510' x2='-9.325' y2='3.510' stroke='#f472b6' stroke-width='0.100'/><line class='ly-fab' x1='-4.515' y1='-4.110' x2='-9.325' y2='-4.110' stroke='#f472b6' stroke-width='0.100'/><line class='ly-fab' x1='4.625' y1='-5.000' x2='5.625' y2='-5.000' stroke='#f472b6' stroke-width='0.100'/><line class='ly-fab' x1='5.625' y1='-5.000' x2='5.625' y2='5.000' stroke='#f472b6' stroke-width='0.100'/><line class='ly-fab' x1='5.625' y1='5.000' x2='4.625' y2='5.000' stroke='#f472b6' stroke-width='0.100'/><rect class='ly-courtyard' x='-10.200' y='-5.650' width='16.650' height='11.300' fill='none' stroke='#4ade80' stroke-width='0.050'/><rect class='ly-copper pad' data-num='' data-name='' x='-3.200' y='-5.400' width='4.550' height='5.250' rx='1.137' fill='#f59e0b' stroke='#00000033' stroke-width='0.03' opacity='0.94'/><text class='padnum' x='-0.925' y='-2.775' font-size='1.100' fill='#1c1206' text-anchor='middle' dominant-baseline='central' pointer-events='none' font-family='ui-monospace,monospace' font-weight='700'></text><rect class='ly-copper pad' data-num='' data-name='' x='-3.200' y='0.150' width='4.550' height='5.250' rx='1.137' fill='#f59e0b' stroke='#00000033' stroke-width='0.03' opacity='0.94'/><text class='padnum' x='-0.925' y='2.775' font-size='1.100' fill='#1c1206' text-anchor='middle' dominant-baseline='central' pointer-events='none' font-family='ui-monospace,monospace' font-weight='700'></text><rect class='ly-copper pad' data-num='' data-name='' x='1.650' y='-5.400' width='4.550' height='5.250' rx='1.137' fill='#f59e0b' stroke='#00000033' stroke-width='0.03' opacity='0.94'/><text class='padnum' x='3.925' y='-2.775' font-size='1.100' fill='#1c1206' text-anchor='middle' dominant-baseline='central' pointer-events='none' font-family='ui-monospace,monospace' font-weight='700'></text><rect class='ly-copper pad' data-num='' data-name='' x='1.650' y='0.150' width='4.550' height='5.250' rx='1.137' fill='#f59e0b' stroke='#00000033' stroke-width='0.03' opacity='0.94'/><text class='padnum' x='3.925' y='2.775' font-size='1.100' fill='#1c1206' text-anchor='middle' dominant-baseline='central' pointer-events='none' font-family='ui-monospace,monospace' font-weight='700'></text><rect class='ly-copper pad' data-num='1' data-name='Switch_output' x='-9.950' y='-4.210' width='4.600' height='0.800' rx='0.200' fill='#f59e0b' stroke='#00000033' stroke-width='0.03' opacity='0.94'/><text class='padnum' x='-7.650' y='-3.810' font-size='0.480' fill='#1c1206' text-anchor='middle' dominant-baseline='central' pointer-events='none' font-family='ui-monospace,monospace' font-weight='700'>1</text><rect class='ly-copper pad' data-num='2' data-name='Input' x='-9.950' y='-2.940' width='4.600' height='0.800' rx='0.200' fill='#f59e0b' stroke='#00000033' stroke-width='0.03' opacity='0.94'/><text class='padnum' x='-7.650' y='-2.540' font-size='0.480' fill='#1c1206' text-anchor='middle' dominant-baseline='central' pointer-events='none' font-family='ui-monospace,monospace' font-weight='700'>2</text><rect class='ly-copper pad' data-num='3' data-name='CB' x='-9.950' y='-1.670' width='4.600' height='0.800' rx='0.200' fill='#f59e0b' stroke='#00000033' stroke-width='0.03' opacity='0.94'/><text class='padnum' x='-7.650' y='-1.270' font-size='0.480' fill='#1c1206' text-anchor='middle' dominant-baseline='central' pointer-events='none' font-family='ui-monospace,monospace' font-weight='700'>3</text><rect class='ly-copper pad' data-num='4' data-name='GND' x='-9.950' y='-0.400' width='4.600' height='0.800' rx='0.200' fill='#f59e0b' stroke='#00000033' stroke-width='0.03' opacity='0.94'/><text class='padnum' x='-7.650' y='0.000' font-size='0.480' fill='#1c1206' text-anchor='middle' dominant-baseline='central' pointer-events='none' font-family='ui-monospace,monospace' font-weight='700'>4</text><rect class='ly-copper pad' data-num='5' data-name='NC' x='-9.950' y='0.870' width='4.600' height='0.800' rx='0.200' fill='#f59e0b' stroke='#00000033' stroke-width='0.03' opacity='0.94'/><text class='padnum' x='-7.650' y='1.270' font-size='0.480' fill='#1c1206' text-anchor='middle' dominant-baseline='central' pointer-events='none' font-family='ui-monospace,monospace' font-weight='700'>5</text><rect class='ly-copper pad' data-num='6' data-name='FB' x='-9.950' y='2.140' width='4.600' height='0.800' rx='0.200' fill='#f59e0b' stroke='#00000033' stroke-width='0.03' opacity='0.94'/><text class='padnum' x='-7.650' y='2.540' font-size='0.480' fill='#1c1206' text-anchor='middle' dominant-baseline='central' pointer-events='none' font-family='ui-monospace,monospace' font-weight='700'>6</text><rect class='ly-copper pad' data-num='7' data-name='ON/OFF' x='-9.950' y='3.410' width='4.600' height='0.800' rx='0.200' fill='#f59e0b' stroke='#00000033' stroke-width='0.03' opacity='0.94'/><text class='padnum' x='-7.650' y='3.810' font-size='0.480' fill='#1c1206' text-anchor='middle' dominant-baseline='central' pointer-events='none' font-family='ui-monospace,monospace' font-weight='700'>7</text><rect class='ly-copper pad' data-num='8' data-name='' x='-3.200' y='-5.400' width='9.400' height='10.800' rx='2.350' fill='#f59e0b' stroke='#00000033' stroke-width='0.03' opacity='0.94'/><text class='padnum' x='1.500' y='0.000' font-size='1.100' fill='#1c1206' text-anchor='middle' dominant-baseline='central' pointer-events='none' font-family='ui-monospace,monospace' font-weight='700'>8</text></svg></div>-<div id=tip></div>-<script>-var KIND="footprint", MPN="RAY/LM2676SX-ADJ", PINS=[{"desc":"","name":"Switch_output","number":"1","type":""},{"desc":"","name":"Input","number":"2","type":""},{"desc":"","name":"CB","number":"3","type":""},{"desc":"","name":"GND","number":"4","type":""},{"desc":"","name":"ON/OFF","number":"7","type":""},{"desc":"","name":"FB","number":"6","type":""},{"desc":"","name":"NC","number":"5","type":""}];-var byNum={}; PINS.forEach(function(p){byNum[String(p.number)]=p;});-var stage=document.getElementById('stage'), svg=stage.querySelector('svg'), tip=document.getElementById('tip');-// ---- pan/zoom -----var vb=(svg.getAttribute('viewBox')||'0 0 100 100').split(/\s+/).map(Number), base=vb.slice();-function setVB(){svg.setAttribute('viewBox',vb.join(' '));}-stage.addEventListener('wheel',function(e){e.preventDefault();var r=stage.getBoundingClientRect();var mx=(e.clientX-r.left)/r.width,my=(e.clientY-r.top)/r.height;var f=e.deltaY<0?0.88:1.14;var nw=vb[2]*f,nh=vb[3]*f;vb[0]+=(vb[2]-nw)*mx;vb[1]+=(vb[3]-nh)*my;vb[2]=nw;vb[3]=nh;setVB();},{passive:false});-var pan=null;-stage.addEventListener('pointerdown',function(e){pan={x:e.clientX,y:e.clientY};stage.classList.add('drag');stage.setPointerCapture(e.pointerId);});-stage.addEventListener('pointermove',function(e){if(!pan)return;var r=stage.getBoundingClientRect();vb[0]-=(e.clientX-pan.x)/r.width*vb[2];vb[1]-=(e.clientY-pan.y)/r.height*vb[3];pan={x:e.clientX,y:e.clientY};setVB();});-function endPan(){pan=null;stage.classList.remove('drag');}-stage.addEventListener('pointerup',endPan);stage.addEventListener('pointerleave',endPan);-stage.addEventListener('dblclick',function(){vb=base.slice();setVB();});-// ---- cross-highlight bus -----function els(n){return [].slice.call(document.querySelectorAll('[data-num="'+n+'"]'));}-function clearHi(){[].slice.call(document.querySelectorAll('.hi')).forEach(function(e){e.classList.remove('hi');});}-function hi(n){els(n).forEach(function(e){e.classList.add('hi');});}-function post(n){try{parent.postMessage({type:'lbr-hover',pin:n===null?null:String(n),mpn:MPN},'*');}catch(_){}}-function showTip(n,x,y){var p=byNum[String(n)];if(!p)return;tip.innerHTML='<span class=tn></span><div class=tt></div><div class=td></div>';tip.querySelector('.tn').textContent=n+'  '+(p.name||'');tip.querySelector('.tt').textContent=p.type||'';var d=p.desc||'';if(d)tip.querySelector('.td').textContent=d;else tip.querySelector('.td').style.display='none';tip.style.display='block';tip.style.left=(x+14)+'px';tip.style.top=(y+12)+'px';}-[].slice.call(document.querySelectorAll('.pingroup,.pad')).forEach(function(g){-  var n=g.getAttribute('data-num');-  g.addEventListener('mouseenter',function(e){clearHi();hi(n);post(n);showTip(n,e.clientX,e.clientY);});-  g.addEventListener('mousemove',function(e){tip.style.left=(e.clientX+14)+'px';tip.style.top=(e.clientY+12)+'px';});-  g.addEventListener('mouseleave',function(){clearHi();post(null);tip.style.display='none';});-});-window.addEventListener('message',function(e){var d=e.data||{};if(d.type!=='lbr-hover')return;clearHi();if(d.pin!=null)hi(d.pin);});-// ---- footprint layer toggles -----[].slice.call(document.querySelectorAll('.lyrtog')).forEach(function(b){-  function apply(on){[].slice.call(document.querySelectorAll('.ly-'+b.getAttribute('data-lyr'))).forEach(function(el){el.classList.toggle('lyr-off',!on);});}-  apply(b.classList.contains('on'));-  b.addEventListener('click',function(){apply(b.classList.toggle('on'));});-});-// ---- auto-grow the host readme iframe -----function ph(){var h=Math.max(360,Math.min(16000,document.body.scrollHeight||420));parent.postMessage({type:'readme-height',height:h},'*');}-window.addEventListener('load',ph);setTimeout(ph,300);-</script>-</body></html>+<!doctype html><title>lm2676sx-adj</title>\ No newline at end of file
viewers/symbol.html+1−65
@@ -1,65 +1 @@-<!doctype html><html lang=en><head><meta charset=utf-8>-<meta name=viewport content="width=device-width,initial-scale=1"><title>RAY/LM2676SX-ADJ symbol</title>-<style>-:root{--bg:#0d1117;--panel:#161b22;--edge:#30363d;--ink:#e6edf3;--mut:#8b949e;--acc:#00b8b0;--accb:#00e6dc;--hi:#6ea8fe}-*{box-sizing:border-box;margin:0}html,body{height:100%}-body{background:var(--bg);color:var(--ink);font-family:'Satoshi',system-ui,sans-serif;display:flex;flex-direction:column}-.bar{display:flex;flex-wrap:wrap;align-items:center;gap:8px;padding:8px 11px;border-bottom:1px solid var(--edge);flex:none}-.bar .h{font-size:11px;text-transform:uppercase;letter-spacing:.06em;color:var(--mut);font-weight:700}-.bar .sp{flex:1}-.lyrtog{display:inline-flex;align-items:center;gap:6px;font-size:11px;color:var(--mut);background:#1a2130;border:1px solid var(--edge);border-radius:999px;padding:3px 9px;cursor:pointer;user-select:none}-.lyrtog.on{color:var(--ink);border-color:#485162}.lyrtog:not(.on){opacity:.5}-.lyrtog .d{width:8px;height:8px;border-radius:50%;background:#485162}-.stage{flex:1;min-height:0;position:relative;overflow:hidden;background:var(--bg);cursor:grab;touch-action:none}-.stage.drag{cursor:grabbing}-.stage svg{position:absolute;inset:0;width:100%;height:100%}-.pingroup,.pad{cursor:pointer}-.pingroup.hi .pinvis{stroke:var(--hi)!important;stroke-width:7}-rect.pad.hi{stroke:var(--hi);stroke-width:.15;paint-order:stroke}-.lyr-off{display:none}-#tip{position:fixed;z-index:99;pointer-events:none;display:none;max-width:250px;background:#0d1117;border:1px solid var(--acc);border-radius:8px;padding:7px 10px;box-shadow:0 8px 26px #000a}-#tip .tn{font:700 12px ui-monospace,monospace;color:var(--accb)}-#tip .tt{font-size:10px;text-transform:uppercase;letter-spacing:.04em;color:var(--mut);margin-top:1px}-#tip .td{font-size:11px;color:var(--ink);margin-top:5px;line-height:1.4}-</style></head><body>-<div class=bar><span class=h>Schematic symbol</span><span class=sp></span></div>-<div class=stage id=stage><svg xmlns='http://www.w3.org/2000/svg' viewBox='-750 -300 1500 600' style='width:100%;height:100%'><rect x='-500.0' y='-250.0' width='1000.0' height='500.0' fill='#e35d5d22' stroke='#e35d5d' stroke-width='4'/><g class='pingroup' data-num='1' data-name='Switch_output'><line class='pinvis' x1='-700.0' y1='-150.0' x2='-500.0' y2='-150.0' stroke='#dfe4ec' stroke-width='4'/><line x1='-700.0' y1='-150.0' x2='-500.0' y2='-150.0' stroke='transparent' stroke-width='26' pointer-events='stroke'/></g><text x='-600.0' y='-105.0' font-size='60' fill='#9fb0c8' text-anchor='middle' dominant-baseline='central'>1</text><text x='-470.0' y='-150.0' font-size='60' fill='#e6e9ef' text-anchor='start' dominant-baseline='central'>Switch_output</text><g class='pingroup' data-num='2' data-name='Input'><line class='pinvis' x1='-700.0' y1='-50.0' x2='-500.0' y2='-50.0' stroke='#dfe4ec' stroke-width='4'/><line x1='-700.0' y1='-50.0' x2='-500.0' y2='-50.0' stroke='transparent' stroke-width='26' pointer-events='stroke'/></g><text x='-600.0' y='-5.0' font-size='60' fill='#9fb0c8' text-anchor='middle' dominant-baseline='central'>2</text><text x='-470.0' y='-50.0' font-size='60' fill='#e6e9ef' text-anchor='start' dominant-baseline='central'>Input</text><g class='pingroup' data-num='3' data-name='CB'><line class='pinvis' x1='-700.0' y1='50.0' x2='-500.0' y2='50.0' stroke='#dfe4ec' stroke-width='4'/><line x1='-700.0' y1='50.0' x2='-500.0' y2='50.0' stroke='transparent' stroke-width='26' pointer-events='stroke'/></g><text x='-600.0' y='95.0' font-size='60' fill='#9fb0c8' text-anchor='middle' dominant-baseline='central'>3</text><text x='-470.0' y='50.0' font-size='60' fill='#e6e9ef' text-anchor='start' dominant-baseline='central'>CB</text><g class='pingroup' data-num='4' data-name='GND'><line class='pinvis' x1='-700.0' y1='150.0' x2='-500.0' y2='150.0' stroke='#dfe4ec' stroke-width='4'/><line x1='-700.0' y1='150.0' x2='-500.0' y2='150.0' stroke='transparent' stroke-width='26' pointer-events='stroke'/></g><text x='-600.0' y='195.0' font-size='60' fill='#9fb0c8' text-anchor='middle' dominant-baseline='central'>4</text><text x='-470.0' y='150.0' font-size='60' fill='#e6e9ef' text-anchor='start' dominant-baseline='central'>GND</text><g class='pingroup' data-num='7' data-name='ON/OFF'><line class='pinvis' x1='700.0' y1='-150.0' x2='500.0' y2='-150.0' stroke='#dfe4ec' stroke-width='4'/><line x1='700.0' y1='-150.0' x2='500.0' y2='-150.0' stroke='transparent' stroke-width='26' pointer-events='stroke'/></g><text x='600.0' y='-195.0' font-size='60' fill='#9fb0c8' text-anchor='middle' dominant-baseline='central'>7</text><text x='470.0' y='-150.0' font-size='60' fill='#e6e9ef' text-anchor='end' dominant-baseline='central'>ON/OFF</text><g class='pingroup' data-num='6' data-name='FB'><line class='pinvis' x1='700.0' y1='-50.0' x2='500.0' y2='-50.0' stroke='#dfe4ec' stroke-width='4'/><line x1='700.0' y1='-50.0' x2='500.0' y2='-50.0' stroke='transparent' stroke-width='26' pointer-events='stroke'/></g><text x='600.0' y='-95.0' font-size='60' fill='#9fb0c8' text-anchor='middle' dominant-baseline='central'>6</text><text x='470.0' y='-50.0' font-size='60' fill='#e6e9ef' text-anchor='end' dominant-baseline='central'>FB</text><g class='pingroup' data-num='5' data-name='NC'><line class='pinvis' x1='700.0' y1='50.0' x2='500.0' y2='50.0' stroke='#dfe4ec' stroke-width='4'/><line x1='700.0' y1='50.0' x2='500.0' y2='50.0' stroke='transparent' stroke-width='26' pointer-events='stroke'/></g><text x='600.0' y='5.0' font-size='60' fill='#9fb0c8' text-anchor='middle' dominant-baseline='central'>5</text><text x='470.0' y='50.0' font-size='60' fill='#e6e9ef' text-anchor='end' dominant-baseline='central'>NC</text></svg></div>-<div id=tip></div>-<script>-var KIND="symbol", MPN="RAY/LM2676SX-ADJ", PINS=[{"desc":"","name":"Switch_output","number":"1","type":""},{"desc":"","name":"Input","number":"2","type":""},{"desc":"","name":"CB","number":"3","type":""},{"desc":"","name":"GND","number":"4","type":""},{"desc":"","name":"ON/OFF","number":"7","type":""},{"desc":"","name":"FB","number":"6","type":""},{"desc":"","name":"NC","number":"5","type":""}];-var byNum={}; PINS.forEach(function(p){byNum[String(p.number)]=p;});-var stage=document.getElementById('stage'), svg=stage.querySelector('svg'), tip=document.getElementById('tip');-// ---- pan/zoom -----var vb=(svg.getAttribute('viewBox')||'0 0 100 100').split(/\s+/).map(Number), base=vb.slice();-function setVB(){svg.setAttribute('viewBox',vb.join(' '));}-stage.addEventListener('wheel',function(e){e.preventDefault();var r=stage.getBoundingClientRect();var mx=(e.clientX-r.left)/r.width,my=(e.clientY-r.top)/r.height;var f=e.deltaY<0?0.88:1.14;var nw=vb[2]*f,nh=vb[3]*f;vb[0]+=(vb[2]-nw)*mx;vb[1]+=(vb[3]-nh)*my;vb[2]=nw;vb[3]=nh;setVB();},{passive:false});-var pan=null;-stage.addEventListener('pointerdown',function(e){pan={x:e.clientX,y:e.clientY};stage.classList.add('drag');stage.setPointerCapture(e.pointerId);});-stage.addEventListener('pointermove',function(e){if(!pan)return;var r=stage.getBoundingClientRect();vb[0]-=(e.clientX-pan.x)/r.width*vb[2];vb[1]-=(e.clientY-pan.y)/r.height*vb[3];pan={x:e.clientX,y:e.clientY};setVB();});-function endPan(){pan=null;stage.classList.remove('drag');}-stage.addEventListener('pointerup',endPan);stage.addEventListener('pointerleave',endPan);-stage.addEventListener('dblclick',function(){vb=base.slice();setVB();});-// ---- cross-highlight bus -----function els(n){return [].slice.call(document.querySelectorAll('[data-num="'+n+'"]'));}-function clearHi(){[].slice.call(document.querySelectorAll('.hi')).forEach(function(e){e.classList.remove('hi');});}-function hi(n){els(n).forEach(function(e){e.classList.add('hi');});}-function post(n){try{parent.postMessage({type:'lbr-hover',pin:n===null?null:String(n),mpn:MPN},'*');}catch(_){}}-function showTip(n,x,y){var p=byNum[String(n)];if(!p)return;tip.innerHTML='<span class=tn></span><div class=tt></div><div class=td></div>';tip.querySelector('.tn').textContent=n+'  '+(p.name||'');tip.querySelector('.tt').textContent=p.type||'';var d=p.desc||'';if(d)tip.querySelector('.td').textContent=d;else tip.querySelector('.td').style.display='none';tip.style.display='block';tip.style.left=(x+14)+'px';tip.style.top=(y+12)+'px';}-[].slice.call(document.querySelectorAll('.pingroup,.pad')).forEach(function(g){-  var n=g.getAttribute('data-num');-  g.addEventListener('mouseenter',function(e){clearHi();hi(n);post(n);showTip(n,e.clientX,e.clientY);});-  g.addEventListener('mousemove',function(e){tip.style.left=(e.clientX+14)+'px';tip.style.top=(e.clientY+12)+'px';});-  g.addEventListener('mouseleave',function(){clearHi();post(null);tip.style.display='none';});-});-window.addEventListener('message',function(e){var d=e.data||{};if(d.type!=='lbr-hover')return;clearHi();if(d.pin!=null)hi(d.pin);});-// ---- footprint layer toggles -----[].slice.call(document.querySelectorAll('.lyrtog')).forEach(function(b){-  function apply(on){[].slice.call(document.querySelectorAll('.ly-'+b.getAttribute('data-lyr'))).forEach(function(el){el.classList.toggle('lyr-off',!on);});}-  apply(b.classList.contains('on'));-  b.addEventListener('click',function(){apply(b.classList.toggle('on'));});-});-// ---- auto-grow the host readme iframe -----function ph(){var h=Math.max(360,Math.min(16000,document.body.scrollHeight||420));parent.postMessage({type:'readme-height',height:h},'*');}-window.addEventListener('load',ph);setTimeout(ph,300);-</script>-</body></html>+<!doctype html><title>lm2676sx-adj</title>\ No newline at end of file