← Commit history

lm2676sx-adj: factory component page (tier=mfr)

Ray ·1166bd3dcc · ·parent bbdc055
3 files changed +25−21
README.md+8−7
@@ -8,13 +8,13 @@ LM2676SX-ADJ from Texas Instruments, in a TO-263-7. Pinout and pin descriptions  | Pin | Name | Type | Function | |---|---|---|---|-| 1 | Switch_output | output | Source pin of the internal high-side DMOS FET. This is the switching node; connect to the inductor and the cathode of the external catch diode. Rated for 3 A load current. |-| 2 | Input | power_in | Supply input pin to the drain of the internal high-side FET. Connect to the 8-40 V power supply and input bypass capacitors (CIN). Path from VIN pin to high-frequency bypass CIN and GND must be as short as possible. |-| 3 | CB | passive | Boot-strap capacitor connection for the high-side gate driver. Connect a high-quality 100-nF (0.01 µF typ.) capacitor from CB to the VSW (Switch_output) pin. |-| 4 | GND | power_in | Power ground pin. Connect to system ground. Ground pins of CIN and COUT and the path to CIN must be as short as possible. |-| 5 | NC | unconnected | No-connect pin. Leave floating or tie to ground per layout convenience. |-| 6 | FB | input | Feedback sense input. For the ADJ version, connect to the midpoint of an external resistor divider from VOUT to GND to program VOUT between 1.2 V and 37 V (internal reference ≈ 1.21 V). Absolute-max range -0.3 V to 14 V. |-| 7 | ON/OFF | input | Enable input to the voltage regulator. High = ON, Low = OFF. Pull high or leave floating to enable the regulator; drive low for the ~50-µA quiescent standby state. |+| 1 | Switch_output | output | Source pin of the internal high-side DMOS FET; the switching node. Connects to the inductor and the cathode of the external catch (freewheel) diode. |+| 2 | Input | power_in | Supply input to the drain of the internal high-side FET. Connect to the 8-V to 40-V supply with input bypass capacitor CIN; path from VIN to bypass CIN and GND must be as short as possible. |+| 3 | CB | passive | Boot-strap capacitor connection for the high-side gate driver. Connect a high-quality 100-nF capacitor from CB to the Switch_output (VSW) pin. |+| 4 | GND | power_in | Power ground. Connect to system ground; return path for CIN and COUT must be short and low-impedance. |+| 5 | NC | unconnected | No connect. Leave floating or tie per PCB convention. |+| 6 | FB | input | Feedback sense input. For the ADJ version, connect to the midpoint of an external resistor divider from VOUT to GND to program the output voltage (VREF ≈ 1.21 V). Absolute max range −0.3 V to 14 V. |+| 7 | ON/OFF | input | Enable input for the regulator. High (or float) = ON, Low = OFF; pull high or float to enable, drive low for ~50-µA standby shutdown. |  ## Key specifications @@ -28,6 +28,7 @@ LM2676SX-ADJ from Texas Instruments, in a TO-263-7. Pinout and pin descriptions ## Ordering variants  - `LM2676SX-ADJSX`+- `LM2676SX-ADJS` - `LM2676SX-ADJT` - `LM2676SX-ADJSD` 
lm2676sx-adj.lbr+9−3
@@ -50,7 +50,7 @@ <layer number="98" name="Guide" color="6" fill="1" visible="yes" active="yes"/> </layers> <library>-<description></description>+<description>Texas Instruments DC-DC Converters, TO-263-7</description> <packages> <package name="TO-263-7_TabPin8">   <description>8 pads, 16.1 x 10.8 mm. TO-263/D2PAK/DDPAK SMD package</description>@@ -108,6 +108,7 @@ </packages> <symbols> <symbol name="LM2676SX-ADJ">+  <description>Texas Instruments DC-DC Converters, TO-263-7</description>   <wire x1="-12.7" y1="5.08" x2="12.7" y2="5.08" width="0.254" layer="94"/>   <wire x1="12.7" y1="5.08" x2="12.7" y2="-7.62" width="0.254" layer="94"/>   <wire x1="12.7" y1="-7.62" x2="-12.7" y2="-7.62" width="0.254" layer="94"/>@@ -125,7 +126,7 @@ </symbols> <devicesets> <deviceset name="LM2676SX-ADJ" prefix="U">-  <description></description>+  <description>Texas Instruments DC-DC Converters, TO-263-7</description>   <gates>     <gate name="G$1" symbol="LM2676SX-ADJ" x="0" y="0"/>   </gates>@@ -140,7 +141,12 @@         <connect gate="G$1" pin="FB" pad="6"/>         <connect gate="G$1" pin="NC" pad="5"/>       </connects>-      <technologies><technology name=""/></technologies>+      <technologies>+        <technology name="">+          <attribute name="MPN" value="LM2676SX-ADJ" constant="no"/>+          <attribute name="MANUFACTURER" value="Texas Instruments" constant="no"/>+        </technology>+      </technologies>     </device>   </devices> </deviceset>
page.json+8−11
@@ -32,43 +32,43 @@         "number": "1",         "name": "Switch_output",         "type": "output",-        "description": "Source pin of the internal high-side DMOS FET. This is the switching node; connect to the inductor and the cathode of the external catch diode. Rated for 3 A load current."+        "description": "Source pin of the internal high-side DMOS FET; the switching node. Connects to the inductor and the cathode of the external catch (freewheel) diode."       },       {         "number": "2",         "name": "Input",         "type": "power_in",-        "description": "Supply input pin to the drain of the internal high-side FET. Connect to the 8-40 V power supply and input bypass capacitors (CIN). Path from VIN pin to high-frequency bypass CIN and GND must be as short as possible."+        "description": "Supply input to the drain of the internal high-side FET. Connect to the 8-V to 40-V supply with input bypass capacitor CIN; path from VIN to bypass CIN and GND must be as short as possible."       },       {         "number": "3",         "name": "CB",         "type": "passive",-        "description": "Boot-strap capacitor connection for the high-side gate driver. Connect a high-quality 100-nF (0.01 µF typ.) capacitor from CB to the VSW (Switch_output) pin."+        "description": "Boot-strap capacitor connection for the high-side gate driver. Connect a high-quality 100-nF capacitor from CB to the Switch_output (VSW) pin."       },       {         "number": "4",         "name": "GND",         "type": "power_in",-        "description": "Power ground pin. Connect to system ground. Ground pins of CIN and COUT and the path to CIN must be as short as possible."+        "description": "Power ground. Connect to system ground; return path for CIN and COUT must be short and low-impedance."       },       {         "number": "5",         "name": "NC",         "type": "unconnected",-        "description": "No-connect pin. Leave floating or tie to ground per layout convenience."+        "description": "No connect. Leave floating or tie per PCB convention."       },       {         "number": "6",         "name": "FB",         "type": "input",-        "description": "Feedback sense input. For the ADJ version, connect to the midpoint of an external resistor divider from VOUT to GND to program VOUT between 1.2 V and 37 V (internal reference ≈ 1.21 V). Absolute-max range -0.3 V to 14 V."+        "description": "Feedback sense input. For the ADJ version, connect to the midpoint of an external resistor divider from VOUT to GND to program the output voltage (VREF \u2248 1.21 V). Absolute max range \u22120.3 V to 14 V."       },       {         "number": "7",         "name": "ON/OFF",         "type": "input",-        "description": "Enable input to the voltage regulator. High = ON, Low = OFF. Pull high or leave floating to enable the regulator; drive low for the ~50-µA quiescent standby state."+        "description": "Enable input for the regulator. High (or float) = ON, Low = OFF; pull high or float to enable, drive low for ~50-\u00b5A standby shutdown."       }     ],     "provenance": {@@ -132,8 +132,5 @@     "docs/lm2676sx-adj-datasheet.pdf",     "viewers/symbol.html",     "viewers/footprint.html"-  ],-  "visibility": {-    "public": true-  }+  ] }\ No newline at end of file